REPAIR TO GRIT PLASTER, CHAJJA RAIN WATER REPAIR CONNECTED REPAIR WORKS IN LAL BARRACK ROAD AND AKBAR ROAD UNDER AGE B/R-I OF GE(W) AGRA

Amount

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr in-Charge.

M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying ement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels colour as approved by Engineer -In-Charge, with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed by Engr in-Charge (Payment for providing grooves shall be made separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove and finished with appvoved weather paint as directed complete as per specifications and direction of the Engineer-in-charge

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed by Engr in-Charge

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound finished other than fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr in-Charge

M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed by Engr in-Charge

M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical complete all as specified and directed by Engr in-Charge

M & L for applying 1mm thick water proofing putty and two coats of Acrylic weather proof Exterior paint on new plastered or unplastered surface of walls or concrete including preparation of surfaces at any height (not exc11 Mtr) including necessary scaffolding/centering etc complete all as specified and directed by Engr in-Charge

M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed by Engr in-Charge

Preparing newly plastered or un plastered surfaces of wall and applying two coat of cement base paint over a coat of primer and over 1mm thick water proofing wall care putty complete all as specified and directed by Engr in-Charge.

M&L for applying two coats of cement base paint with roller on old decorated wall surfaces over 1 mm thick water proof wall care putty including complete removal of existing treatment with mechanical complete all as specified and directed by Engr in-Charge

Supply only liquid water proofing compound complete all as specified and directed by Engr in-Charge

M & L for applying two coats of water proofing coating liquid by brush applying in wall surfaces as per directed by Engineer-In-Charge.

Cutting the roots of trees from the brick walls/stone wall made in cm exc half and not exc one brick thick and making good the disturbed surfaces including coating of paving hot bitumen to arrest further growth to the roots including repair existing surfaces with cm 1:3 or PCC 1:2:4 complete all as specified and directed by Engr in-Charge

Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr in-Charge

M&L cement concrete type B-0, 1:2:4 mix ( 12.5 mm graded agg) in floor, padding, roof kerbs or mud stops, rounded or chamfered on edges and similar work complete all as specified and directed by Engr in-Charge

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr in-Charge

M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in floor, benching,coping , roof kerbs, mud stop, padding etc and similar work all as specified and directed.

M&L for 75mm thick PCC type D2 (1:4:8) as in floor concrete complete all as specified and directed by Engr in-Charge

PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection ( 75 mm thick ) laying in alternate ways finished even and smooth without using extra cement complete all as specified and directed by Engr in-Charge

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed in neat cement slurry and pointed in gray pigment cement and pigments neat cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed by Engr in-Charge

Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and applying a coat of cement slurry with 3.00 kg of cement per sqm and rendering 15mm thick in CM 1:3 using WPC finished rough (Sunken floor/Wall) and then applying two course treatment as follow:- (i)M & L three coat of waterproofing solutions smartcare damp proof ultra an innovative fiber reinforced elastomeric liquid which provide the ultimate waterproofing cover of 2.32sqm/Liter complete all as specified and directed by Engr-In-Charge. (ii) 40mm bore GI pipe for Spout pipe length 0.75m.

M&L for PCC type D2 (1:4:8) as in foundation, filling and mass concrete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr in-Charge

M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed by Engr in-Charge .

M&L non skid joint free coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.(toilet,bath,kitchen, passage floor)

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified and directed by Engr in-Charge

M&L Vitrified coloured tiles 7.5 to 10mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed by Engr in-Charge(bed room and other room floor)

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and suitable clamp fixed to wall complete all as specified and directed by Engr in-Charge

S & F 75 mm bore PVC (SWR) bends sith complete fittings of any radius complete all as specified and directed by Engr in-Charge

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends with complete fittings of any radius complete all as specified and directed by Engr in-Charge

S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified and directed by Engr in-Charge

S&F 110 mm bore PVC (SWR) single Y with access door of any radius complete all as specified and directed by Engr in-Charge

S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified and directed by Engr in-Charge

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr in-Charge.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etc of grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed by Engr in-Charge

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed by Engr in-Charge

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank tripal layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr in-Charge

S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified and directed by Engr in-Charge

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed by Engr in-Charge

S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed by Engr in-Charge

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed by Engr in-Charge

All as per item No above but 20mm bore complete all as specified and directed by Engr in-Charge

Refixing old steel tubing 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Engr in-Charge

Refixing old steel tubing 20 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed by Engr in-Charge

S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr in-Charge

S&F 20mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr in-Charge

Taking down chowkhats or frames not exc 1.5 Sqm each with shutters complete all as specified and directed by Engr in-Charge

S&F powder coated aluminium three track sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.60mm thick, bottom rail of section 41mmx20mmx1.60mm thick, vertical style of section 38mmx20mmx1.60mm thick with aluminium anodised chowkhats of section 84.68mmx50mmx1.60mm thick including necessery jointing cleats, glazing clips, rubber packing , snap beading, screws handle and locking system etc, fitted with 5mm thick sheet glass tinted and other shutter with stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.36mm fixed with stainless steel wire stapples including using standard aluminium section. complete all as specified and directed by Engr in-Charge

S & F powder coated aluminium ventilator fabricated out of aluminium section 1.60mm thick (double shutter double leaf) top hung type with stainless steel but hinge, one shutter glazed with and including 5mm thick frosted sheet glass and other shutter with stainless steel wire cloth 0.36mm dia of wire and average width of aperture 136mm fixed with stainless steel wire stapples rubber gasket, stopper, aluminium anodised handle 100mm , aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 84.68mmx50mmx1.60mm thick, bottom rail of secftion 41mmx20mmx1.60mm thick, vertical sttyle of section 38mmx20mmx1.60mm thick all as directed.

S&F framed work such as grill grating etc with ends of bars shouldered or riveted or forged into spikes frame guard bars etc complete all as specified and directed by Engr in-Charge

M&L preparation of new or previously untreated steel surfaces exc 10 cm width or girth (incl roof surface) and applying 1 coat of red oxide over two coat of synthetic enameled paint e complete all as specified and directed by Engr in-Charge

Taking down shutters of any description exc 1 Sqm but not exc 2 each complete all as specified and directed by Engr in-Charge

Refixing shutters of any description exc 1 Sqm but not exc 2 each complete all as specified and directed by Engr in-Charge

M/s Rahul Kumar Agrawal (BID ID -3083328)

M/S OMKAR SINGH YADAV (BID ID -3096875)

M/S DEVENDRA KUMAR GUPTA (BID ID -3092088)

M/s S. K. Construction Co. (BID ID -3092108)

N.K. ENTERPRISES (BID ID -3088213)

M/s United Engineers (BID ID -3082356)

Allied Builders (BID ID -3086418)