Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC 4 BY 8 BLOCK H NEAR VIJAY CHOWK EAST DELHI DELHI 110051 | EAST DELHI | DELHI | 110051 | L1 | Accepted-AOC L1 | |
| 2 | L2₹14.1 L+₹1.4 L (11.3%)Rejected-Finance NOT FOUND | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹16.8 L+₹4.1 L (32.7%)Rejected-Finance CC III 28A JANTA BHAWAN ROAD SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹17.2 L+₹4.6 L (36.3%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
1 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
GE (AF) SIRSA, HARYANA-125055
REPAIRMAINTENANCE OF B/R NATURE WORKS AT WSA INSIDE TECHNICAL AREA AT AF STN SIRSA
2024_MES_658823_1
GE/SRA/T-36/2024-25
Open Tender
Miscellaneous Works
Item Rate
240 days
GE (AF) SIRSA
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) SIRSA
₹60,000
Yes
12 Jul 2024
10 Jun 2024
2 Jul 2024
10 Jun 2024
1 Jul 2024
19 Jun 2024
Amount
Demolition of Cement Concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of debris outside AF land and disposed off complete all as specified and as directed.
Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside AF land and disposed off complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and shown on drawing.
M&L for 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in floor/paving finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 75mm thick PCC 1:3:6 type C-1, using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.
M&L for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any) for foundation and plinth beams etc, vertical or to batter for rough finished surfaces complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves etc for rough finished surfaces complete all as specified and directed.
M&L for formwork to side of pillars, posts, struts, piers, columns for rough finished surfaces complete all as specified and directed.
M&L for RCC type A1 (1:1½:3) using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. (NOTE: Reinforcement to be measured and paid seperately)
M&L for RCC 1:1½:3, type A1 (using 20mm grade stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. (NOTE: Reinforcement to be measured and paid seperately)
M&L for RCC 1:1½:3, type A1 (nominal mix) (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed. (NOTE : Reinforcement to be measured and paid separately).
M&L for providing precast cement concrete, RCC 1:2:4 type B-1, using 20mm graded stone aggregate in landings, cover slabs (for man holes, earthing pits, etc.) chajja, water troughs, mangers, shelves and similar articles with plain face complete with joints to match including necessary formwork complete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid seperately. Quoted rate shall be deemed to inclusive of the cost of formwork)
M&L for Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed.
Dismantling structural steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof/wall coverings, complete all as specified and directed.
M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290, (Gde E- 165) complete all as specified and directed.
S&F 0.63 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
M&L new or previously untreated Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying two Coat of Synthetic Enamel Paint (First quality), over a coat of zinc chrome red oxide primer complete, including cleaning the surface, all as specified and as directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
Taking down cement plaster/terrazzo finish on wall of any description hacking for key scrubbing down with water including racking out joints and removal of debris outside AF land and disposed off complete all as specified and as directed..
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
Supply only liquid water proofing compound complete as per manufacturer instruction and as directed.
M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of the brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rough cast plaster consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio 1:1:1 finished even over 10 mm thick rendering in cement mortar 1:3 on fair faces of the brick work or concrete surfaces complete all as specified and directed.
M&L preparing new Plastered surfaces of Walls by applying 1.5mm Wall Putty including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Acrylic Distemper (of approved tint) over a Coat of suitable Primer with rollers, complete all as specified and directed.
M&L preparing old Distempered surfaces of Walls including filling the existing Nails/Screw Holes, etc. and applying One Coat of Acrylic Distemper (of approved tint) with rollers complete all as specified and directed.
M&L for bringing suitable approved earth from outside AF land and stacking on site for measurement complete all as specified and directed. NOTES :- (1) Earth required for embankment/filling shall be of approved quality and shall be brought from outside the AF land by contractor under his own arrangement. No extra shall be admissible on this account. (2) Proper record for entry of vehicles alongwith details of vehicle registration and capacity shall be recorded for each load duly signed by all concerned. (3) Quoted rate shall be deemed to included for all labour required for excavation, removing the soil, loading and unloading, transportation to site, making temporary profiles, levelling etc. (4) Density of finished earth in embankment, traverse etc shall be as directed by GE/Engr-in-Charge. (5) Necessary deduction for voids in terms of Para 3.6 on Ser page No 21 of SSR Part-II, 2020 (Rates) shall be carried out from the finished quantity of earthwork. Contractor's quoted rate shall be deemed to be inclusive of the above aspect and no claim shall be entertained at a later date in this regard.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed.
All as per item No. 30 but exc. 1.5 m and n. exc 3.0 m high from base
All as per item No. 30 but exc. 3.0 m and n. exc 4.5 m high from base
All as per item No. 30 but exc. 4.5 m and n. exc 6.0 m high from base
All as per item No. 30 but exc. 6.0 m and n. exc 7.5 m high from base
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., removal of debris outside AF land complete all as specified and as directed.
M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
Labour only for Brick work using Serviceable Bricks obtained from Item No. 35 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and as directed.
Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, traverses etc. (each layer) laid bedded and pointed in any mortar complete and as directed by Engr-in-charge
M&L for Brickwork with Fly-Ash bricks (Old Size) as in brick-on-edge walls (less than ½ brick thick), built in cement mortar 1:4 as in drains, traverses, and similar work complete all as specified and directed.
Labour only for Brickwork, (using serviceable bricks obtained from Item No 38 here in before), with brick-on-edge walls (less than ½ brick thick), built in built in cement mortar 1:4 as in drains, traverses, and similar work complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in lintels up to 1.5m clear span, cills, steps; and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, etc incl necessary formwork complete all as specified and directed.
M&L preparing newly Rough Cast plastered surfaces of Walls and applying two coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior Primer (as per Manufacturer's instructions), complete all as specified and as directed.
M&L for preparation of newly plastered surfaces and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions complete all as specified and directed.
M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls by brooming down or steel wire brushing and scraping down, filling of cracks with suitable paste and applying with rollers One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) complete all as specified and directed.
M&L for complete removal of existing treatment on walls. etc and applying and applying two coats of Exterior Emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade (in camouflage pattern) over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions complete all as specified and directed.
NOTES FOR ITEM NO 42 TO 45 : Rates quoted by the tenderer shall be deemed to include for the following applications as under:- (a) Surfaces shall be cleaned properly to remove loose dirt or dust, lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. (c) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Deptt shall not be liable for any untoward incident. (d) Quoted rate shall be deemed to include cost of necessary scaffolding as required for a height of building not exceeding 18mtr (Approx). (e) Contractor shall bring the required quantity of material in two lots in sealed containers after approval of Make/sample and keep in MES store under custody of JE/Engr-in-charge.
M&L for preparation of old painted steel sheets (corrugated/plain), over 10 cm in width or girth, by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots over 10cm width or girth and applying one coat of synthetic enamel paint, as per required shade (in camouflage pattern) complete all as specified and as directed. NOTE: Rates quoted by the tenderer shall be deemed to include for the following applications as under:- (a) All safety measures for the safety of workers shall be ensured by contractor before execution of work. Deptt shall not be liable for any untoward incident. (c) Quoted rate shall be deemed to include cost of necessary scaffolding as required for a height of building not exceeding 18mtr (Approx). (d) Painting to be done by using Airless Paint Sprayer Painting Machine Ceiling Spray Gun, having maximum pressure 3300PSI(22.7MPa), Max flow rate 2.0±10%(L/min), standard nozzle size 0.017,Length of high pressure hose 50m maximum complete all as per manufacturer instruction. (e) Contractor shall bring the required quantity of material in two lots in sealed containers after approval of Make/sample and keep in MES store under custody of JE/Engr-in-charge.
Desilting of silt/soil along with roots of grass/bushes if any, from the beds of open drains n. exc 1.50m deep, girth of drain bed not exceeding 1.00 m and depth of excavation of silt/soil not exceeding 50 cm (Avg) in depth, getting out including removing excavated material top a distance exceeding 250 m but not exceeding 500 m from the sides of drain and spreading in low laying areas complete all as specified and directed.
S&F in repair 2.00 mm thick Linoleum, plain coloured, sealed down with an approved adhesive as in floors including stretching, cutting and fitting complete all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) pipes single socketed,110mm OD, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls with PVC Clips, complete all as specified and directed.
S&F in repair, PVC (SWR) bends for 110mm OD pipe, any radius complete all as specified and directed.
Taking down Aluminium/steel frame with shutter incl partition (area of opening exc 15 Sqm but n. exc 35 Sqm) and refixing the same in the same opening after necessary addition/ alterations to the old frame/ shutters/ partitions/ builders hardware, etc complete all as specified and directed.
shiv shanker enterprises
M/s Satguru Traders
M/s Har Nandi Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .