External Electrification work

Amount

D.C cross-arm 8' chennal (100x50x6 mm)

Transformer Mounting channel (100 x 50 x 6 mm. )

Trans. Mounting with Belting with 50x50x6 mm angle with two cross fixing channel

D.O. Mounting channel 75x40x6 mm

11 KV D.O fuse unit Polymer type

11KV polymer Lightning arrestors Gapless Type

11Kv composite polymer Disc Insulators

11 KV Strain hard ware (T&C type) fitting

LT XLPE Aerial Bunch Cable 3x50+1x16+1x35 spmm 1100 Volts

H.Beam Back Clamps 65x8mm Flat(in Numbers)

H-Beam Clamp 65x8 mm Flat

XLPE 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

XLPE 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts

11Kv polymer pin Insulators

11 KV AB Switch Polymer type 400 Amp with Complete fitting

High precision thread through composite meter Upto 100 KVA

Jointing sleeves suitable for Rabbit (80 sq.mm.Al.Eq.) AAAC conductor

Bi- metallic clamps suitable for 20 mm dia stud and 100 sqmm AAAC

Bi- metallic clamps suitable for 12 mm dia stud and 80 sqmm AAAC

LT Distribution box with isolator on incoming HRC fuse 3 phase 20-80 anos, 100 KVA

Aluminium binding wire and tape

11 KV 'Top clamp 65x65x6 mm. angle type

11 KV 'V' cross arm 65x65x6 mm. angle type

11 KV Guarding Channal 75x40x mm

Barbed Wire

Red oxide paint

Aluminium paint

Anti climbing devices

Danger Boards Enamalled Type 11 KV

M.S. Nut and Bolts

Earthing for DTR As per G.I. schedul G.I. for black cotton sail

Earthing coil of 115 Turns of 50 mm.Dia and 2.5 Mtr. lead of 4.0 MM G.I. wire

11 KV Single pole cut point fitting 100x50x6 mm Channel

Concreting of Rail / Hbeam supports @0.65 Cmt.per pole including muffing of pole

Concreting of stay (20 mm/25 mm) @ 0.3 Cmt. Per stay

Concreting of stay (16 mm/12 mm) @ 0.2 Cmt. Per stay

Concreting of Structure & Foundation (1:3:6)

Stay set complete without Stay wire 16 mm (Painted)

Stay set complete without Stay wire 20 mm (Painted)

G.I. Wires 4.0mm. (8 SWG)1

G.I. Wires 5.0mm. (6 SWG)1

Stay Clamp A type 65x8 mm of MS Flat R.S. Joist

Stay wire 7/3 .15mm(7/10 SWG)

Stay wire 7/3 .15mm(7/10 SWG)

Clmps for neural for AB Cable

Stone Block /Per cast block for base pedding (450x450x75mm)

Deep drawn metal service connection box-1 phase 1 incoming 35 mm 8 outgoing 10 sq

AB Cable hanging clamps/tension clamps (Galvanized) as pre enclosed Drawing

Piercing connector Type-I for 1P/3P (Main 16-50sqmm tap-off 16-50 sqmm)

Piercing connector Type-II (Main 16-50sqmm tap-off 16-50 sqmm)

Suspension clamp for LT AB Cable

Labour &Transportation charges including of all material provided by company from area store bhopal to site & Betul to be borne by contractor

Other GST

GOSWAMI ENTERPRISES

R S BHATIA