Road Safety Work on accident-prone locations identified under PD PWD Budaun by District Road Safety Committee in district Budaun.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type- IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. the retro reflective sheeting shall be tested for three year out door weathering test in Indian condition as per IRC 67-2012 and proof of the same in form of Govt. report shal be uploaded while quoting tender. (iii- 60 cm circular with diffinitation plate size (20cm.x60 cm.) .Speed Limit

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type- IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. the retro reflective sheeting shall be tested for three year out door weathering test in Indian condition as per IRC 67-2012 and proof of the same in form of Govt. report shal be uploaded while quoting tender. (X- 30cm.x90cm. left/Right Object Hazard) .

Linear delineator system / Supply and fixing of linear delineator system (LDS) panels made of micro prismatic retro reflective sheeting type eleven duty laminated on thin aluminium foil to a unique corrugated safe to provide retro reflection across wide range of observations and external angle each LDC panels should be of nominal length of 33 inches and each ridge shall be approximately 0.34 inch high, each LDC panels is to be firmimg fixed on exciting concrete / brick work with 16 no fastener / screw( as per SOR LKO serial no 9 irc 79-2019)

Providing and erection direction and indentifican retro-reflectorised sign as per IRC:67- 2012 made of high intensity grade sheeting . the retro reflective sheeting shall be forertificate of having the sheeting tested for coefficient of retro reflection daytime colour and luminanace shrinkage , flexibility, liner removal adhesion , impact resistance specular gloss and fungus resistance 3year outdoor wethering and its having passed these tests shall be obtained from international /Government laboratory institute by the manufacture of the sheeting nd in case the certificate is obtained from international condition its should also be obtained from indian condition within 3 years of launching from indian condition within 3 years of launching of product by the manufacture in broad Alternatively a certificate confirming to ASTM Specification ( D4956-09) on artificial accelerated weathering requirements from reputed laboratory in india can be accepted provisionaly in such a situation the Employer /client if so desire could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three yearss outdoor weathering of the sheeting s per IRC 67-2012 Legends , letters , numerals and borders etc should be s per MoRTH specification no- vide clause 801.3, Sheet Fixed over aluminum sheeting 2 mm thick with area not exceeding 0.90Sqm supported on a mild Steel Single angle iron post 75x75x6mm firmly fixed to the ground by means of property designed foundation with with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. Complete (Direction and place Identification sign with size up to 0.90sqm size board) .(SCH LKO CH 29)

Reflective raised pavement marker providing and Fixing of raised pavement marker (cat eye) type x-ASTMD -4956-04 avery dennision /3M (USA MAKE)having Moulded body of polycarbonate,ASA HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirements mentioned in MORT& H circular its reflective lens made of micro prismetic lens(capable of providing total internal reflection of light),electronically welded to the body the length , height and width of the body shall not exceed 130 mm, 20 mm and 105mm respectively, the area of each reflected surfaceshall not be less than 13 sqcm on each side stopping at the angle of 35+/-5 degree to the base to ensure maximum reflectively , it shall comply to specification of catagory A MORTH circular No. RW/NH/33023/10-97-DO III dt. 11.06.1997.lenses shall be moulded of methyl methecrylate confirming to ASTMD 788 or equvalent with 7 years warranty, (Sor 2018 Chapter 27 S no. 8 New Item Meerut )

Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqmtr area thicness of 2.5.. In exclusive of surface applied glass beads as per IRC:35. The finish surface to be level, Uniform and free from streaks and holes. As per SOR Lucknow Chp. 26 SN 2 (Morth 803 (8.13)