PROVN OF TOILET BLOCKS IN THE COMPLEX OF CENTRE PARADE GROUND ARTY CENTRE AND ADDN / ALTN OF TOILET BLOCK AND CONSTRUCTION OF ONE LAB UNDER PM SHRI IN KENDRIYA VIDYALYA AT NASIK ROAD CAMP UNDER GE NRC.

Amount

Surface excavation nexc 30 cm deep and averagiing 30 cm deep and getting out in soft/loose soil all as per directed by Engr in Charge

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Excavation over areas, n, exc 1.50m deep and getting out in soft soil

All as per item No 3.00 above but depth exe 1.5 mtr and not exe.3 mtr and in soft / disintegrated rock

Returning , filling in, including spreading levelling, watering and well ramming in layers nexc 25 cm etc completed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M&L for moorum/ red bajri filling in floors or pavings,laid in layers n exc 15 cm thick, spread, levelled and rammed including watering etc. completed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

Dismantlling of stone slabs & tiles of any decsription or thickness in floors, aprons etc laid, bedded & pointed in any mortar.

Demolition of cement concrete concrete(un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

Taking down PVC chowkat or frames with PVC shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each.

Taking up or down 15 mm dia tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

All as per item No 16.00 above but 20 mm dia

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for Hardcore of guage n exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface etc. completed

Treating the bottom and sides of excavation @ 5 litres of emulsion per square metre of surface area.

M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate)as in foundations,filling and mass concrete

M&L for 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement all as directed by EIC.

M&L for reinforced cement concrete M-20(Design Mix) using 20 mm graded aggregate as in footings,foundation beams and plinth beams

All as per Item No.23.00 above but as in columns

All as per Item No.23.00 above but in beams, cantilevers, lintels over 1.5m span

All as per Item No.23.00 above but as in slabs

M&L for cement concrete type B-2 1:2:4 ( 40 mm graded aggregate) as in surface channel, foundation, filling and mass concrete.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping including necessary formwork etc complete

M&L for 75mm thick PCC 1:3:6 type C2 ( using 40mm graded stone aggregates) as in plinth protection finished even and fair without using extra cement all as specified.

Providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chulla hoods, chajjas shelves and similar articles and set in CM 1:4 etc complete all as directed

Providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as inlintel, door, window cills bressumer,steps,courses, copings,apex stones incl formwork etc complete set in CM 1:4 etc complete all as directed

M&L for Providing precast cement concrete louvres and jallies Type B-0 (1:2:4) in CM 1:4, 25mm thick (mea-sured solid), including all mouldings but excluding frame

M&L for formwork to sides of concrete foundations,footings and plinth beams for flat rough finished surfaces of concrete

M&L for formwork to soffits of suspended slabs such as roof slabs for flat rough finished surfaces of concrete

M&L for formwork to sides of soffits of floor or roof beams, cantilevers, lintels etc for flat rough finished surfaces of concrete

M&L for formwork to sides of pillars, columns for flat rough finished surfaces of concrete square,rectangular or polygonal

Providing & Fixing "RAJSHRI" Brand factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 63mm x 51 mm ( Moulded ) Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min.990 N ), Minimum Compressive Strength of 58 N/mm2 , Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and lenght, all as per specifications drawings as directed by the Engineer-In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasteners shall be paid separately) - For WC/Bathroom/ Toilet etc.

Providing “RAJSHRI” Brand Factory Made 25mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F Powder Coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F anodised powder coated aluminium Window/ventilators shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F Sheet glass ordinary quality 5.50 mm thick n. exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

All as per item No.44.00 above but 4mm Sheet glass with solar control film 25 micron.

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane as per instructions of manufacturers complete all as specifed and directed

S&F 3mm thick pin headed sheet glass ordinary quality and glazing in squares n exc 0.5 Sqm in each pane.

S&F for mortice lock brass 2 levers vertical type size 100mm

S&F continuous (Piano) hinges MS bright finish electro galvanized – 30mm width of flap.

S&F stainless steel 150 mm size handels.

S&F stainless steel magnetic door catcher multiple uses door stopper holder for cabinet,drawer,min wt.260gm complete all as specified and directed

S&F stainless steel barrel tower bolt 150 mm long

S&F aluminium alloy barrel tower bolt 150 mm long

S&F staineless steel butt hinges 100mm size medium weight complete all as specified and directed

S&F 150 mm aluminium alloy handels cast/plate type

S&F aluminium alloy anodised sliding door bolt 250mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy abd fixed

S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy abd fixed

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed

M&L for rendering 15 mm thick cement plaster other than fair faces of brick work or concrete surfaces in CM 1:4 rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for rendering 10 mm thick (1:6) on brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 15 mm thick (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for rendering 15 mm thick in CM (1: 4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for Mild steel TMT bars of 10mm dia and over, cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No.64.00 above but 6 to 8 mm dia bars

All as per item No.64.00 above but 6 to 8 mm dia bars in stirrups

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete,conforming to Fe 410-W (Gde -E-250)quality -A drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

S&F Round/square bars as in framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted , or forged into spikes; framed guard bars and similar work conforming to Fe-290. Gde E-165 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.

M&L for AAC Block masonary, straight or curved on plan exceeding 6 M mean radius built in Ready-Mix Jointing Mortar complete all as specified and directed by EIC.

M&L for Brick work with fly ash bricks, straight or curved on plan exwith old size bricks exc 6m mean radius built in CM 1:6.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4.

M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks.

Supply only liquid water proofing compound.

M&L for loose filling with broken brick of gauge 40 to 80 mm in soakage pits, soakage well

M&L for rendering 10 mm thick ready mix cement plaster on other than fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth complete all as specified and directed by EIC.

M&L for 10 mm thick rendering in CM 1:4 on brick masonary wall surfaces finished rough to receive tiles

M&L for rendering 10mm thiick in CM 1:3 on Roof slab, when the concrete is still green

M&L rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces as a backing coats for fixing tiles.

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6.

M&L Non Skid ceramic tiles 7 to 8 mm thick for coloured tiles (square rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm , in floors etc, set and ointed in neat cement slurry and painted in coloured cement to match.

M&L for double charged vitrified ceramic tiles (any shade (light/dark) 8 to10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and painted in white or coloured cement to match.Note : Shade will be as approved by GE.

M&L for glazed ceramic tiles coloured in vertical surface 300x600/300x450x6mm to 7mm thick set and joint in neat cement slurry and pointed in colour cement to match (coloured tiles).

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd

S&F hand cut cudappa stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: Screed bed layer measured seperately complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20mm thick.

M&L for Damp proof coarse 25mm to horizental or vertical surfaces incl necessary formwork in cement concrete 1:2:4,type B-0 with polythene film ,50micron thick laid on a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm all as specified.

S&F G.I frame work with standard sections for hanging POP ceiling all as complete as directed by EIC.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed by EIC.

M&L for 18 mm thick PVC sheet prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with white lamination including necessary locking device, catches suitable for kitchen cabinets and 4 mm thick PVC beading on all edges as in kitchen cabinets etc complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

M&L for preparing surface of walls and applying three coats of white wash on new plastered surfaces.

M&L for prepration of old decorated plastered surfaces incl brooming down moulds & efforecent salt and trading oil and greasy spots and applying two coat of white washing on ceilings.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparing plastered surfaces and applying two coats of oil bound distemper over one coat of primer including preparatory work with including and applying 3mm thick wall care putty to distempering on surfaces of walls complete all as specified and directed by EIC.

S&F reinforced concrete pipe, class NP2 laid and jointed complete with collers 150mm bore of pipe

M&L for cement concrete bed to drain pipes in cement concrete (1:3:6) type C-1 including packing under and haunching against the sides of pipe 150mm dia after they are laid and tested complete all as specified and directed by Engr-in-Charge.

S&F homemade single bowl Stainless steel kitchen sink 1.0 mm thick sheet for kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and conecting union to pipe, bowl size 600mmx450mmx250mm all as specified and directed

S&F chromium Plated cast copper alloy multifunction pillar tap with capston heads fixed to iron pipes 15mm dia.

S&F waste coupling of 40 mm bore (half or full threaded) suitable for sink & Urinals

S&F bib taps, fix cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixing 15mm bore dia complete all as specified and directed.

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.7 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15kg/sqm

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP)

S&F of vitreous china wash basin, oval type, white ,flat back, size 450x300mm excluding taps, waste, chain and plug and porcelin stopper but including brackets.

S&F Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F for vitreous china wash down WC Pan Pedestal pattern type including fixing.

S&F in repairs counter sunk type vitreous china wash basin Flat Bar 550x400mm excluding taps, chain and plug and porceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall completed all as specified and directed.

S&F in repair vitreous china bowl urinal flat back size 465x355x265mm white with grating spreader and union and discharge pipe complete all as specifed and directed

S&F in repair vitreous china bowl urinal flat back size 375x320x620mm white with grating spreader and union and discharge pipe complete all as specifed and directed. (Make : JAQUAR URS-WHT-132530 or equivalnet in approved makes)

S&F in repair for vitreous china wash down WC Pan Pedestal pattern type including fixing. (Make : JAQUAR SLS-WHT-6851S300PP/SLS-WHT-6851S300UF or equivalnet in approved makes)

S&F in repairs table top vitreous china wash basin Flat Bar 485x370mmx150mm excluding taps, chain and plug and porceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall completed all as specified and directed. (Make : JAQUAR SLS-WHT-6901 or equivalnet in approved makes)

S&F for waste fittings, brass, chromium plated of 32 mm dia for wash basins.

S&F of swan neck pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts.

S&F in repairs chromium Plated cast copper alloy pillar tap with capston heads fixed to iron pipes 15mm dia..

S&F of PVC(SWR) floor trap of 75mm dia outlet,plain with grating including jointing with solvent cement

S&F for PVC(SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to walls.

S&F for PVC(SWR) pipes110mm single socketed in any length with rubber ring joints fixed to walls.

S&F of PVC(SWR) 'P' trap of 125/110 mm bore

S&F of PVC(SWR) junction single, (Single T) equal or unequal 110 mm bore

S&F of PVC(SWR) vent cowl of 110 mm bore

S&F of PVC(SWR) 75 mm dia bends

All as per Item No. 122.00 but 110 mm dia

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F in repairs PVC connection 15mm size with brass nut of 450mm long size

S&F stop valve, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of bore dia 15 mm or for union.

S&F in repair stop valve , chromium plated fancy typewith long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of bore dia 15 mm or for union.

S&F 10 ltr capacity PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets.

S&F in repairs 10 ltr capacity PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets.

S&F Ball brass valves, high pressure, with polythene float and flynut for 20 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F 15 mm dia tubes medium grade, galvanized with iron all fittings fixed laid in treanches of sizes complete all as specified and directed.

All as per item No.131.00 above but 20 mm dia

All as per item No.131.00 above but 25 mm dia

S&F 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor in concealed/open of sizes complete all as specified and directed

All as per item No.134.00 above but 20 mm dia

Re-fixing only 15 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

All as per item No.136.00 above but 20 mm dia

Extra for forming fair finished drain or channel 30cm inner girth using extra cement incl forms, moulds, mitred/stopped ends etc.

S&F in repairs plastic seat cover coloured closed pattern with flat bottom and cover with mild steel chromium plated or alluminium hinging device.

S&F in repairs bib tap 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&F in repairs brass chromium plated tublar towel rail 'D' shape 20mm dia 600mm long.

S&F in repairs Angle cock 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm dia with stainless steel wire stapples/GI screws/wooden beadings

S&F chromium plated grating of size up to 100mm

S&F in repair jet sprey suitable for European type WC

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing from site.

Supply, fixing, hoisting & Testing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litre capacity, double layer all as specified.

Supply, fixing, hoisting & testing Rotational moulded poly-ethylene water storage tanks of 2000 Ltrs capacity(cylindrical vertical with closed top) double layer all as specified.

S&F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms).

S&F in repair 8mm thick glass shelf "Corner" type size 250mm x250mm including necessary brackets front edge of glass rounded and woulded with one CP railing complete.

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.2mm thick, with modular cover plate with frame of adequate required modules for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete all as specified and directed for One light point and one fan point controlled by one, one way swtich.

All as per ser item No. 154.00 herein before but One 5 Amp 5 pin socket outlet point on independent board with ofter switches including earth wire as specified.

All as per ser item No. 154.00 herein before but One 5 Amp 5 pin socket outlet point on Same board with ofter switches including earth wire as specified.

All as per ser item No. 154.00 herein before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 2.5 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including PVC/wooden folding boards for mounting purposes.

Supply and fixing of switch modular type 6 Amps one way, 1 module, AC 230 Volts, LED based indicator, shrouded terminal, ISI marked complete all as specified and directed.

Supply and fixing of modular type socket 6 Amps 3 pin round socket with child safety shutter (ISI marke), AC 230 Volts, shrouded terminals, smooth plug complete all as specified and directed.

Supply and fix switch piano flush button type 5 Amps single pole one way .

Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal.

Supply and fixing ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in replacement of invertor LED bulkhead 10 watt 220 volts AC with IP 65 protection with inbuilt battery back-up complete with drivers, clamps and accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing LED luminaires light fittings 1x 10 Watts polycarbonate LD T8 retrofit tube and MS batten with decorative end cap complete with all accessories such as spring loaded rotor type lamp holder, connector block, LED tube rod etc prewired incl three core copper cable 23/0.0076 from ceiling rose to tube light fittings.

Supply and fixing distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fixing of MCB SPN 6-32 Amps, 230 Volts, 50 Hz with 10 KA

Supply and fixing of MCB SP 6-32 Amps, 230 Volts, 50 Hz with 10 KA

Supply and fixing of 30 Watt invertor LED street light fitting luminaire, energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08.E68 , including coneecting up with 2/3 core flexible coppper conductor cable, compete all as specified and directed by Engr-in-Charge.

Supply and fix Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size dia 15 mm

Supply and fix Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size dia 20 mm.

All as per item No 172.00 above but size dia 25 mm.

S&F LED light fitting 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing in LED tube light fitting surface and wall mounted batten with 20 watts LED having minimum 100 lumens/watts and with integrated electronic driver complete made up of polycarbonate complete all as specified and directed.

Supply & fixing brushless direct current (BLDC) ceiling fan 1400mm sweep (ISI Marked), 230 volts, includung connection rod as per existing size of length of GI pipe medium grade including regulator dismantling of old one and depositing in MES store yard as per specified and directed by Engr-in-Charge.

Supply & fixing exhaust fan (Metal body) 300mm sweep, heavy duty, 230 volts ,1400 RPM including louvers of suitable size and making hole size as per requirement , dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge.

Supply, laying & testing cable XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor, laid in tranches passing through pipes /ducts including testing complete of following cross sectional area size 10 Sqmm 2 core complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4.0 mm dia, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

All as per ser item No. 179.00 herein before but using GI Strip 32x6mm

M&L for cutting/drilling existing pipe line 25 mm bore & taking branch connection etc complete incl all necessary GI fiting, jointing materials, earth work etc.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 19,469.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

MAHIMA CONSTRUCTION (BID ID -3157930)

SHILPVED (BID ID -3165391)