Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC 145H 2G AQAMA MODEL APARTMENT LUKERGANJ PRAYAGRAJ UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.7 L+₹1.1 L (2.88%)Rejected-Finance 2 LOCKHART ROAD NEAR PCDA P OFFICE PRAYAGRAJ U P PIN 211014 | PRAYAGRAJ | UTTAR PRADESH | 211014 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹38.8 L+₹2.1 L (5.68%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹41.7 L+₹5.0 L (13.7%)Rejected-Finance VILLAGE RATGANHA CHAIL DISTT KAUSHAMBI U P PIN 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹43.6 L+₹6.9 L (18.9%)Rejected-Finance MOHAMMADPUR CHAIL KAUSHAMBI UTTAR PRADESH 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
MINOR REPAIR TO BUILDING OF MD / OTM ACCN AT VARIOUS LOCATION UNDER AGE B/R II AT NEW CANTT PRAYAGRAJ
2024_MES_663027_1
8736/E8
Open Tender
Civil Works
Item Rate
270 days
NEW CANTT PRAYAGRAJ
As per tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE WEST PRAYAGRAJ
₹98,000
Yes
29 Oct 2024
1 Jul 2024
11 Sept 2024
1 Jul 2024
4 Sept 2024
15 Jul 2024
Amount
Cleaning and removing all scale and dirt etc from water storage tank of size exc 250 ltr but n.exc 500 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning all and specified and directed.
Cleaning and removing all scale and dirt etc from water storage tank of exc 500 ltr but n.exc 1000 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning all and specified and directed.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.
S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142 gms), complete all as specified and directed.
S&F in repair central hole wash hand basin mixer 15mm dia ,Chromium Plated brass with casted swinging spout including plugging and securing to walls complete all as specified and directed.
S&F in repair plastic water closet seat white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair plastic water closet seat white/coloured for WC with attached cistern, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair two way bib taps with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.
S&F in repair bib taps with wall flange ( weight of each bib tap should not less than 0.575kg) 15mm bore, fancy type, quarter turn, brass chromium plated, long body , screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.
S&F in repair angle valve with wall flange (weight of each should not be less than 0.40kg) 15mm bore, fancy type, quarter turn, brass, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.
All as item No-10 herein above but two way complete all as specified and directed.
S&F rubber door seal 5mm thick,32mm wide, with Aluminium strip of size 19mm thick fixed with machine steel screw with washer complete all as specified and directed
S&F in repair 15 mm dia hand shower size 120mm round shape Multi flow with cascade effect ABS body & face plated chrome with rubit cleaning system complete all as specified and directed.
S&F in repair wall mixer with telephonic shower arrangement including provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wall flanges, brass chromium plated, fancy type and fixed complete all as specified and directed.
S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, fancy type, superior quality, fixed with screws complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 150mm size with swivel joints complete all as specified and directed.
S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed.
S & F in repair corner glass self assembly of 250 mm size with bracket & fixed with steel screw complete all as specified and directed.
Supply only 32mm bore PTMT waste pipe of best quality, 600mm long for sink/ WHB etc complete all as specified and directed.
S & F in repair 32mm bore Stainless steel waste coupling for SS sink / WHB etc with rubber washer ,plug etc complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n exc 1.50 Sqm but each complete all as specified and directed.
Taking down shutters of any description not exc. 1.0 Sqm each leaf complete all as specified and directed.
Taking down shutters of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf complete all as specified and directed.
Refixing shutters in the same opening of any description not exc. 1.0 Sqm each leaf including easing and adjusting complete all as specified and directed.
Refixing shutters in the same opening of any description nexc. 1.0 sqm but not exc. 2.0 Sqm each leaf including easing and adjusting complete all as specified and directed.
S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS frame shall be covered with heat molded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in frame at site as per specification & shown on drawing(SSR-Part II) complete all as specified and directed..
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately)
S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.
S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.all as specified and directed.
S&F flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides including 5 mm thick teak wood leaping alaround complete all as specified and directed.
S&F factory made 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a) complete all as specified and directed.
S&F 35mm thick Glazed and skeleton window shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers . fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F 100mm long Aluminium anodised butt hinges complete all as specified and directed.
S&F 125mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Supply only 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 150mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.
S&F 100mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.
S&F 100mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F 200mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F 200mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.
S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.
S&F Steel ventilators, fixed type, with glazing bars complete all as specified and directed
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed
S&F window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed
M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.
Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with wooden beads complete all as specified and directed.
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.
M&L for 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.
Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete. Make : Rajshree or equivalent all as specified and approved by Accepting Officer. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only
Supply and fix/fabricate in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated sheet complete.
S&F of 1st class hard wood leaping,6mm thick,18/19mm wide fixed with nails to timber surfaces complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.
S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.
S&F 100mm size fancy type polished steel handle, fixed with screws complete all as specified and directed.
S&F in repair 2nd class hard wood plain fillets square rectangular or triangular in section, sectional area not exc 03 sq cm, wrought on exposed faces fixed with nails complete all as specified and directed.
Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.
M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed with following:- (a) M&L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of size 25x25mm. (b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners. (c) S & F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S & F E-board ceiling tiles of size 595 mm x 595mm x 4mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE.
Taking down old existing ceiling tile and fixing E-board ceiling tiles of size 595 mm x 595mm x 4mm thickness in existing location, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade complete all as specified and directed. Note:- Pattern/ design of tiles shall be as approved by GE.
Taking down and Refixing Aluminium shutters of any description exceeding 1 Sqm and not exceeding 2.5 Sqm each in the same opening , easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.
S&F in repair 2nd class hard wood plain fillets square rectangular or triangular in section, sectional area exc 6 sqcm but not exc 13 sq cm, clean sawnt on exposed faces fixed with nails complete all as specified and directed.
S&F in repair 2nd class hard wood plain fillets square rectangular or triangular in section, sectional area exc 13 sqcm but not exc 25 sq cm, clean sawnt on exposed faces fixed with nails complete all as specified and directed.
M&L for preparation of newly wood or wooden based materials surface of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old wood or wooden based materials surface of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F in repair Galvanise mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
S&F Galvanise mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repair 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.
S&F in repair 125mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.
S&F in repair 150mm long aluminum anodized barrel tower bolt of extruded section, fixed with screws complete all as specified and directed.
S&F floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
S&F hasp and staple of aluminium anodised, including bolt to hinge plate and fixed with screws 125 mm long complete all as specified and directed.
S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed.
M&L for Glazed ceramic coloured digital tiles 450x350x7mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
M&L for vitrified light shade floor tiles (scratch free) 10mm thick (square/ rectangular) area of each tile not exc 0.36 Sqm in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
S&F joint free non skid Ceramic colour digital tiles, 7 to 8mm thick (square/ rectangular) , area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for joint free non skid, ceramic “coloured” digital tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.
M&L for running welding at site in repairs exc 6mm but n exc 9mm in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed.
M&L for welding at site in repairs exc 2.5cm but n exc 5cm in length in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed.
S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.
S&F in repair PVC valve less symphonic action, low level flushing cistern of 10 lit capacity including siphon float valve, rubber cone and flush pipe etc complete all as specified and directed.
S&F in repairs complete PVC assembly/ Kit for PVC flushing cistern of any shape or make or capacity complete all as specified and directed.
S&F vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.
S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. Make: Hindware cat part No. 10038 or equivalent make as specified in P.S.
S&F in repair standard PTMT grating doom round 125mm size with waste hole(minimum wt 40 gms) complete all as specified and directed.
S&F PVC connections 15mm bore size 450mm long of pressure rating 6 kg/sq cm with CP brass nuts complete all as specified and directed.
S&F in repair vitreous China squatting pan, ‘Orissa ’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.
S&F in repair brass CP towel ring 20cm dia, fancy type, superior quality, fixed with screws complete all as specified and directed.
S&F in repair health faucet with 1m long flexible pipe with wall hook complete with all fittings complete all as specified and directed.
S&F in repair soap dish brass chromium plated Round/oval shaped fixed to wall with PVC gutty and CP screws complete all as specified and directed.
S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 950 mm X 510 mm with bowl size 410 mm x 410mm x 230 mm complete all as specified and directed.
S&F in repair stainless steel sink made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 495 mm X 420 mm with bowl size 410 mm x 410mm x 230 mm complete all as specified and directed.
S&F in repair stainless steel kitchen plate rack (utensil rack) of size 600mmx750mmx250mm, made out of 0.63mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.
S&F in repair pillar taps 15mm bore (weight should not be less than 0.665kg), fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair stop valves 15mm (weight should not be less than 0.575kg) bore concealed type cast copper alloy, chromium plated, fancy type with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs stop valve cast copper alloy (weight should not be less than 0.400kg) screwed down, high pressure with crutch or butterfly handles, screwed down, screwed both ends for iron pipes or for unions, 20 mm dia of pipe complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed
Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.
Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.
S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia complete all as specified and directed.
Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia complete all as specified and directed.
S&F in repair of 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90gms,complete all as specified and directed.
S&F in repair of 15mm dia pillar tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 110 gms, complete all as specified and directed.
S&F in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity white colour three layer (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity white colour three layer (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minimum weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to trenches, floor complete all as specified and directed.
S&F in repair PVC (SWR) bend any radius suitable for 110mm bore with access door PVC pipe jointed with solvent complete all as specified and directed.
S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair Aluminium Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed
S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.
S&F in repair 25mm dia stainless steel, fancy type drapery rod bright polished including end brackets and end knobs fixed with brackets complete all as specified and directed.
S&F in repairs flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, complete all as specified and directed.
S&F in replacement of CP telescopic channel of size exc 45cm but n.exc 50cm long, heavy duty to match with existing size and shape complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on other fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement including taking down of existing plaster complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement including taking down of existing plaster complete all as specified and directed.
M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement including taking down of existing plaster complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed
M& L Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.
Schedule of Credit (MINUS) Rs. 100645.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum
Jahanvi enterprises (BID ID -3069263)
Anupravesh Enterprises (BID ID -3069517)
M/S SANJAY CONSTRUCTIONS (BID ID -3079196)
HARSH ASSOCIETES (BID ID -3072801)
Shivagya Engineering (BID ID -3069768)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .