Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-Finance | L1 | Accepted-Finance 1st Lowest | |
| 2 | L2₹3.5 L+₹1,889.13 (0.55%)Rejected-Finance WARD NO 07 PO PS BANSHIHARI DAKSHIN DINAJPUR | BANSHIHARI | DAKSHIN DINAJPUR | WEST BENGAL | L2 | Rejected-Finance 2nd Lowest | |
| 3 | L3₹3.5 L+₹3,638.32 (1.05%)Rejected-Finance | L3 | Rejected-Finance 3rd Lowest | |
| 4 | L4₹3.5 L+₹5,387.51 (1.56%)Rejected-Finance | L4 | Rejected-Finance 4th Lowest | |
| 5 | L5₹3.6 L+₹14,098.48 (4.07%)Rejected-Finance | L5 | Rejected-Finance 5th Lowest |
Tender Value
₹3.5 L
EMD Value
₹6,997
Closing Date
3 Sept 2026, 1:00 pmClosed
Executive Engineer, KSHD, PWD
KIT Building, 2nd Floor, P-16, India Exchange Place Extension, Kolkata-700073
IPGMER-SSKM Hospital ---- Day to day regular Maintenance and Minor Repairing work at different Government Buildings under Section-V at SSKM Hospital compound during the year 2026-2027. (R and B Works)
2026_WBPWD_5019816_2
WBPWD/KSHD/EE/NIT-12 OF 2026-2027
Open Tender
CIVIL WORKS
Percentage
180 days
IPGMER-SSKM HOSPITAL
Please refer Tender documents.
5 documents required · 5 mandatory
₹6,997
Yes
8 Oct 2026
22 Aug 2026
5 Sept 2026
27 Aug 2026
3 Sept 2026
27 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
Of area 3 sq. metres and below | - | Each | 143.5 | - |
| 2 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 square centimetres and above. | - | Cu.m | 4,459.1 | - |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length.
Sal wood | 1 | Cu.m | 1,16,520.3 | ₹1,16,403.78 |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | - | Sq.m | 2,392.65 | - |
| 5 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with f ire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | 1 | Mtr. | 570.95 | ₹570.38 |
| 6 | 0 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of f ittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
(i) 32 mm thick | - | Sq.m | 3,720.75 | - |
| 7 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes ,shelves ,racks ,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge. | 1 | Sq.m | 2,593.15 | ₹2,590.56 |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
300x10 mm | - | Each | 130.1 | - |
| 9 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
300x16 mm | - | Each | 303.25 | - |
| 10 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm | - | Each | 66.25 | - |
stage.html
html • 0.10 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
2911.pdf
Tender Documents • 0.89 MB
BOQ_5092954.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .