Providing short height 4 Feet Aluminium partition Vitrified floor tiles and painting works in proposed EB Hall at 2nd Floor Technical Block in T E Building Shivpurwa Varanasi (34/2024-25/BSNL/EE(PnD)/LKO)

Amount

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

a) Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

a) Size of Tile 600x600 mm

12 mm cement plaster of mix :

a) 1:6 (1 cement: 6 fine sand)

Providing and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

a) Two coats.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

a) One or more coats on old work.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..

a) In cement mortar

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

a) For fixed portion

(i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

a) Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Transportation of Aluminium Section, Glass panes/partition Glazing from TAX Building, CTO, Cantt to proposed EB Office (2nd Floor), T.E Building, Shivpurwa including manual loading and Unloading at respective sites,all complete as per direction of E-in-C.

Refixing Aluminium partition with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. including fixing with glazing and particle board the same at the new location as decided by Engineer -in-charge complete in all respect .( Cost of EPDM rubber/neoprene gasket etc shall be paid seperately)

Demolishing existing of size 1.60 X 0.65 X0.20 m cement concrete Plateform manually/ by mechanical means including disposal of material beyond compound as per direction of Engineer - in - charge.

Providing unskilled labour for miscellaneous civil works like, dismantling of existing cement plaster skirting, cleaning of floors etc

Taking out existing aluminium partitions, doors, windows, fixed glazing and false ceiling etc by the way of dismembering the member as decided by Engineer -in-charge complete in all respect .

Taking out and refixing of existing wooden door after fixing of floor tiles alongwith necessary repairs and cutting of flush door shutter all complete as per diection of E-in-C

M/s BHARTI ELECTRICAL & TELECOM SOLUTION/ RAM HIRAVAN (BID ID -752982)

M/s Tripty and Associates (BID ID -752998)