Ovalley TP - 2025-2026 - Maintenance of Anganwadi Centre at Ovalley in Ovalley Town Panchayat.

Plastering with cement mortor 1:5 mix to 12mm thick including cost and conveyance of all materials to site including curing etc complete asper standard specification 10m2

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing of walls with glazed tiles of size 15 cm x15cm x 6mm finished thickness with c.m 1:2- and polished with same color cement including all cost and convene of all materials etc.,complete

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting new Iron works such as steel doors, windows, ventilator, window bars, balusters etc., with two coats of approved quality and colour of synthetic enamel paint over the existing red oxide priming coat etc complete complying with standard specifications. (The make quality and colour of paint should be got approved by the Executive Engineer before use on work).