Construction of Veterinary Office, Clinic and Hatchery Building with Compound wall at Kiltan

Amount

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50meter and lift up to 15 meter.(Full Cost)

Earth work excavation by manual means in foundation trenches or drains (not exceeding 1.5m width or 10sqm on plan) including dressing of sides and ramming of bottom,lift up to 1.5,including getting out othe excavated soil and disposal of surplus excavated soil as dirdcted ,withinm a lead of 50mtr. Ordinary Soil (Full Cost)

from 1.50 metre to 3 metres

from 3.00 metre to 4.50 metres

from 4.50 metre to 6.00 metres

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundation etc layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead up to 50mtr and lift up to 1.5mtr.(Full Cost)

Providing and laying cement concrete 1:4:8 (1cement :4 M.sand :8 graded stone aggregate 40mm nominal size) excluding cost of centering and shuttering and reinforcement for foundation and plinth .(Labour Element)

Providing and laying cement concrete 1:5:10 (1 cement: 3 M sand:6 granite chips) foundation and plinth. .(Labour Element)

Providing and laying DPC 40 mm in cement concrete 1:2:4 (1 cement: 2 M sand: 4 granite chips 20mm nominal size) .(Labour Element)

Reinforced cemnt concrete 1:1:5:3(1cement 1.5 M. sand :3granite chips 20mm nominal size ) excluding cost of cenring shuttering and reinforcement all work up to plinth level.(Labour Element)

a) Foundation footings bases of column etc,and mass concrete.

Reinforced cement concret working (wall any thickness) including attached pilasters ,buttresses plinth and string course, fillets, column, pillars, piers ,abutments,post and struts etc..up to floor five level excluding cost of centering and shuttering finishing and reinforcement.1:1.5:3(1 cement 1.5 M. sand :3 granite chips 20 mm nominal size )(Labour Element)

Reinforced cement concrete work in beams ,suspended floors ,roofs,having slope up to 15 degree landing ,shelves chejjas,lintels ,bands,palin window sills,staircase and spiral staircase up to five level excluding cost of centering and shuttering finishing and reinforcemetn with 1:1.5:3(1cement 1.5 M.sand :3graded stone sggregate 20mm nominal size).(Labour Element)

Providing and fixing up to floor two level precast reinforced cement concrete 1:2:4 (1 cement 2 M sand 4 graded stone aggregate 20mm nimnal size) set in position with cement mortar 1:2 1 cement 2 M sand) and finished smooth with 6mm thick cement plaster 1:3 (1 cement 3 M sand) on exposed surface including centring and shuttering in baffle wall and slab. (Labour Element)

Reinforced cement concrete work in well sterning excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement 2 M sand 4 graded stone aggregate 20mm nominal size) (Labour Element)

Providing throating or plastering drip and moulding to R.C.C chajjas. (Labour Element)

Cold twisted steel reinforcement for RCC work including bending,binding and placing inposition complete.(Labour Element)

Centering and shuttering including strutting propping etc and removal of form work.(Full Cost)

a) Foundation footings bases of column etc,and mass concrete.

Centering and shuttering including strutting propping etc and removal of form work.(Full Cost)

Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting propping etc and removal of form work.(Full Cost)

Lintels,beams,plinth beams,girders.bressumers and cantilevers

Centering and shuttering including strutting propping etc and removal of form work.(Full Cost)

Column,piller,piers,abutments,posts and struts

Centering and shuttering including strutting propping etc and removal of form work.(Full Cost)

Stairs, (excluding landings) except spiral-staircases

Centering and shuttering including strutting propping etc and removal of form work.(Full Cost)

well sterning

Cement concrete block (machine moulded) masonry in Foundation and plinth in CM 1:6 (1 Cement: 6 M.sand) with blocks of size 40cmx20cmx15cm. .(Labour Element)

Cement concrete block (machine moulded) masonry in Superstructure above plinth level in CM 1:6 (1 Cement: 6 M.sand) with blocks of size 40cmx20cmx15cm. .(Labour Element)

Brick work with modular bricks of class designation in foundation and plinth in cement mortar 1:6 ( 1 cement 6 M sand). .(Labour Element)

Half brick masonry (I class) in cement mortar 1:4 ( 1 cement : 4 M. sand) in super structure above plinth level upto floor five level.(Labour Element)

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed position I class Karimaruth or equivalent..(Full Cost)

Providing and fixing 35mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class karimaruth or equivalent.(Full Cost)

Providing and fixing karimaruth wood or equivalent 25mm square wooden bars at required spacing in wooden frames of windows and clerestory windows.(Full Cost)

Providing and fixing welded mesh 50mmx50mm, of gauge 10 and width of 1.2m including placing the position etc.complete.(Full Cost)

Providing and fixing chicken mesh 12mm. of gauge 22 including placing the position etc.complete with cement mortar 1:3 (1 cement: 3 M.sand).(Full Cost)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately).For fixed portion.(Full Cost)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):.For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).(Full Cost)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness (Full Cost)

Providing and fixing 8mm thick (PVC) prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge (Full Cost)

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing aluminium grills ( anodised transparent or dyed to required shade according ti IS:1868 with minimum anodic coating of grade AC 15 ) approved design /pattern ,with approved standard section and fixed to the existing window frame with C.P.brass/stainless steel screws @ 200 mm centre to centre ,including cutting the grills to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening ,all complete as per requirement and direction of Engineer- in-charge( Only weight of grill to be measured for payment ) (Full Cost)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charges. With stainless steel cover plate minimum 1.25 mm thickness (Full Cost)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. (Full Cost)

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium tubular handle bar.

Providing 40x5 mm iron hold fast 40cm long including fixing to frames with 10 mm dia bolts, nuts, wooden plugs and embedding in cement concrete block of size 30x10x15 cm of mix 1:3:6 ( 1 cement, 3 M sand 6 graded stone aggregate of 20mm nominal size) Department shall give Cement and Sand. Contractor has to bring iron hold fast

Providing and fixing brass door latch with necesary screws etc complete. a) 250 mm x 16mmx 5 mm (Full Cost)

Providing and fixing brass tower bolt (barral type) with necessary screws etc complete. a) 100 mm x 10mm (Full Cost)

a) 250 mm x 10mm

Providing and fixing brass handle with necessary screws etc complete. a) 75 mm (Full Cost)

Providing and fixing brass door stopper with rubber Cusion and necessary screws etc complete. (Full Cost)

Providing and fixing brass hydraulic door closer with necessary screws etc complete. (Full Cost)

Providing and fixing Aluminium curtain rods with Aluminium brackets. 20 mm dia (heavy type) (Full Cost)

Providing and fixing Bright finished brass casement stay with necessary fittings and screws. 200mm weighning not less than 240gms. (Full Cost)

Providing and fixing 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).. (Full Cost)

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. (Full Cost)

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. (Full Cost)

Providing and fixing Stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fastners, stainless steel bolts etc,. of required size on the top of the floor or the side of waist slab with suitable arrangements as per approval of Engineer-in- Charge(for payment purpose only weight of stainless steel members shall be considred excluding fixing accessoires such as nuts, bolts, fasteners etc.) (Full Cost)

Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture) of first quality confirming to IS:15622 of approved make, in colours such as White, ivory, Grey, Fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement: 4 P.sand) and including grouting the joints in spacer with white cement and matching pigment etc. complete. (Matt / Smooth finish) Khajaria/Johnson/Bell. Department shall give Cement only and Contractor has to bring Plastering Sand and tiles

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 (thickness to be specified by the manufacture) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 (1 cement: 3 P.sand) and joining with grey cement slurry @3.3 kg per sqm, including grouting the joints in spacer pointing in white cement mixed with pigment of matching shade complete. 300x450 mm. Khajaria/Johnson/Bell. Department shall give Cement only and Contractor has to bring Plastering Sand and tiles

Providing and laying matt finish vitrified floor tiles (premium quality) in different sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, laid 20mm thick cement mortar 1:4 (1 cement: 4 P. sand ) including grouting the joints in spacer with white cement and matching pigments etc.. complete. Size 800x800mm(flooring), matt finish vitrified tiles Khajariya/Jonson/Bell . Department shall give Cement only and Contractor has to bring Plastering Sand and tiles

Providing and laying matt finish vitrified tiles (premium quality) in different sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 P. sand) including grouting the joints in spacer with white cement and matching pigments etc. complete. 800x800mm, matt finish vitrified tiles Khajariya/Jonson/Bell . Department shall give Cement only and Contractor has to bring Plastering Sand and tiles

Cement concrete flooring 1:2:4 (1 cement 2 M.sand 4 stone aggregate) finished with ap loating coat of neat cement including cement slurry, rounding of edges and strips etc. But excluding the cost of nosing the steps etc. complete. including Neat cement punning 40 mm thick with 20 mm nominal size to aggregate. (Labour Element)

Providing and laying cement concrete 1:5:10 (1 cement 5 M sand 10 graded stone aggregate 40mm nominal size) around the pipe 15cm thick as per standard design excluding cost of centring, shuttering and reinforcement. 100 mm dia.(6Kg/ cm2)(Prince/Supreme/Finolex). (Full Cost)

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Tile work. (Full Cost)

6mm cement plaster to ceiling 1:3 (1 cement: 3 plastering sand).Department shall to provide Cement Only.Contrctor has to bring Plastering Sand

12mm cement plaster 1:6 (1cement: 6 Plastering sand) on the out side. Department shall to provide Cement Only.Contrctor has to bring Plastering Sand

15mm cement plaster 1:6 (1 Cement: 6 plastering sand) on the rough side or inside. Department shall to provide Cement Only.Contrctor has to bring Plastering Sand

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. (Birla white/JK wall care/ Bison) (Full Cost)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer.(Berger/Asian/Nerolac) (Full Cost)

Finishing with Deluxe Multi surface paint system for interiors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm. For Interior Wall (Berger/Asian/Nerolac) (Full Cost)

Finishing wall with Arcylic smooth exterior paint of required shade on new work (two or more coats applied @1.67ltr/10sqm) over including priming coat of exterior primer applied @ 2.20 kg/10 sqm.(Berger/Asian/Nerolac) (Full Cost)

Painting wood work with Delux Multi Surface paint to give an even shade. Two or more coats applied on @ 0.90ltr/10sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture (Berger/Asian/Nerolac) (Full Cost)

Providing and fixing M.S Gate in approved pattern with locking arrangement & necessary fittings and including a priming coat of approved steel primer. (Full Cost)

Providing and laying pressed clay tile (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 P sand) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement: 4 M sand) and finished neat complete.. (Full Cost)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.)(Class I, SDR 11) (a) 20 mm nominal bore (Full Cost)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. .For External work. (Class I, SDR 11) (a) 20 mm nominal bore (Full Cost)

(b) 32 mm nominal bore

Providing and fixing CP brass bibcock of approved quality and manufacture complete.(Cera/ Hindware/ Parryware) (a) 15 mm nominal bore (Full Cost)

(b) 20 mm nominal bore

Providing and fixing CP brass stopcock of approved quality and manufacture complete.(Cera/ Hindware/ Parryware) (a) 15 mm nominal bore (Full Cost)

(b) 20 mm nominal bore

Providing and fixing half roung PVC eave Gutter with bolt and nut, bitumen washers etc. and flat iron brackets 40x3 mm size including PVC end drop, etc. complete as per the direction of Engineer in charge. 110mm dia.(6 Kg/ cm2)(Prince/Supreme/Finolex) (Full Cost)

Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC pan with plastic seat and lid.(Cera Conventional type Model No.2008/Hindware/ Parryware) (Full Cost)

Providing and fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap. (Cera Cognac Model No.1011/ Hindware/ Parryware) (Full Cost)

Providing anf fixing Stailess steel A ISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40 mm ,including painting of fittings and brackets, cutting and making good the walls where required. (Cera/Prince/Hind) Kitchen sink with drain board 510x1040 mm bowl deth 250 mm (Full Cost)

Providing and fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. (Cera model No.5567 size 600x300mm/ Hindware/ Parryware).(Full Cost)

Providing and fixing Ball valve (PVC) of approved quality and manufacture complete. 32 mm nominal bore. (Prince/ Supreme/ Finolex) (Full Cost)

Providing and fixing Wheel valve (PVC) of approved quality and manufacture complete. 25 mm nominal bore. (Prince/ Supreme/ Finolex) (Full Cost)

Providing and fixing health faucet of approved quality and manufacture complete.(Cera/ Hindware/ Parryware) (Full Cost)

Providing and fixing sintex tank on terrace (at floor level) polthene water storage tank 1SI:12701 marked, with cover and suitable locking arrangement and maing necessary holes for inlet and overrflow pipe but without fittings and the base support for tank 500 ltr. (Sintex/Ocean/Aquatech)(Full Cost)

Providing and fixing towel rail brackets fixed to wooden cleat with scerws and washers. 600 x 20 mm CP brass towel rail with brackets 600mm long towel rail brackets with total length of 645mm width 78mm and effective height of 88 mm weighinig not less than 190 gms. (Cera/Parryware/Neycer) (Full Cost)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. (Cera/Parryware/Neycer) (Full Cost)

Providing and fixing nominal gauge PVC pipe of approved quality complete with special flange compression type fittings including trenching and refilling, etc. External work. (6Kg/ cm2) (Prince/ Supreme/ Finolex) (Full Cost)

110 mm nominal bore (outlet)

63 mm nominal bore (inlet)

90 mm nominal bore (inlet)

50 mm nominal bore (inlet)

Providing , laying and jointing PVC pipes grade 'A' with solvent cement including cutting jointing etc complete. 110 mm diameter pipes. (Prince/Supreme/Finolex) (Full Cost)

Providing and fixing 100 mm PVC grating with gully trap.(Prince/Supreme/Finolex) (Full Cost)

Providing and fixing on wall face PVC. soil waste and vent pipe 75mm dia pipes (Prince/Supreme/Finolex) (Full Cost)

Providing and fixing 18mm thick gang saw cut mirror polishe (pre moulded and pre polished) machine cut for kitchen platforms, vanity countrers, window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar1:4( 1 cement: 4 M. sand) with jointed treared with white cement, mixed with matching pigment, epoxy toch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour & shade area of slab upto 0.50 Sqm. (Full Cost)

Providing edge moulding to 18mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work (Full Cost)

K UMMERKOYA