PERIODICAL SERVICES TO OTM AND MD ACCN, REPAIR TO TOILET, BATHROOM, KITCHEN, INTERNAL WATER SUPPLY AND SANITARY FITTINGS AND ALLIED WORKS AT 7 AIR FORCE HOSPITAL KANPUR CANTT

Amount

Demolition of brick masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified and directed.

Demolition of concrete of any description and in any position not other wise specifically provided in complete all as specified and directed.

M&L for Brick work with fly ash modular bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 as in wall etc complete all as specified and directed.

M&L for RCC (1:2:4) type B1 using 20mm graded stone aggregate as in as in slabs complete all as specified and directed.

Demolition of RCC shelves of any description and in any position not other wise described including cutting re-enforcement as required and removing the debris out of MD land complete all as specified.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors, on walls complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors, walls complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm dia complete all as specified and directed.

M&L for use and waste form work to sides and soffits of slabs complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as directed by Eng-in-charge.

Taking up or down 20 mm bore steel tubing and connections complete all as directed by Eng-in-charge.

S&F 15 mm bore galvanized steel tubes, medium grade for flush pipes, water supply pipes etc, fixed to walls and ceilings or laid in floors complete all as specified.

Re-fixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc) including cleaning old pipe for re-fixing complete all as directed by Engr-in-Charge.

S&F 20 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc, laid in trenches complete all as directed.

Re-fixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc) including for re-fixing of old pipe complete all as directed.

S&F in repairs fancy bib taps slandered of PTMT any colour, screwed for iron pipe or brass ferrule of 15 mm dia (minimum weight 15 mm-90 gms) complete all as specified and directed.

S&F in repair 15 mm bore chromium plated fancy type bib taps, long body cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair pillar taps cast copper alloy with capstan head, screwed down, high pressure with long screwed shanks and fly nuts fixed in repair with 15 mm bore pipes complete all as specified. (weight of taps should not be less than 0.600 Kgs) complete all as specified and directed.

S&F in repair Vitreous china wash basin, white, flat back, size 500X450 mm excluding taps, but including waste pipe, coupling but including brackets complete all as specified and directed.

S&F in repair kitchen sink made of stainless steel 1.0 mm thick with drainage boards, washers and CP waste coupling with grating including bedding in cement mortar including fixing mild steel cantilever bracket over all size 915mmX460mm with bowl size 410mmX330mmX160mm and connecting union to pipe complete all as specified and directed.

Dismantling of floor, hearth, or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store yard complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square or rectangular of size 400X400 mm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified over 15 mm screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic coloured dark tiles 10 mm thick square or rectangular of size 600X600 mm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified over 15 mm screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square or rectangular of size 600X600 mm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified over 15 mm screed bed in CM 1:6 complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in CM (1:3) to ends or edges of landing steps cills concealed water tubing etc and making good cutting n.exc 10 cm girth as in brick walls complete all as specified and directed.

Dismantling water tank of exc 500 & n.exc 1000 ltrs capacity and removing to store all as directed by Eng-in-Charge.

Dismantling water tank of exc 250 & n.exc 500 ltrs capacity and removing to store all as directed by Eng-in-Charge.

Supply hoisted & fixed in position 1000 ltrs capacity rotational moulded polyethylene 3 layer (white) water tanks (Cylindrical vertical with closed top) as specified in SSR part-1 including providing two union & check nut pieces for inlet & outlet pipe of suitable dia complete all as specified (with threaded lid) complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polyethylene three layer (white) water tanks (Cylindrical vertical with closed top) hoisted and fixed in position including providing two piece for fixing inlet & outlet pipe complete (with threaded lid) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 350X250X7mm/450X300X7/600X300X7-8 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster in any description complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 with water proofing compound finished fair and even without using extra cement all as specified and directed by Eng-in-Charge.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 with water proofing compound finished fair and even without using extra cement all as specified and directed by Eng-in-Charge.

M&L for preparation of new plastered surfaces applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of OBD over coat of primer complete all as and directed by Eng-in-Charge.

M&L for Re-securing or easing & adjusting without taking down shutters exc 1 Sqm and n.exc 2 sqm all as specified and directed.

M&L for Re-securing or easing & adjusting by taking down the shutters of any description exc 1 sqm and n.exc 2 sqm and re-fixing in same opening all as specified and directed.

M&L for Repair to aluminium door and window n exc 4.5 sqm all as specified. (glass, particle board, locking device will be measured separately)

M&L for dubbing out average 10 mm thick on irregular face of walls, ceiling in CM 1:4 after brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed.

Add or deduct for each 5 mm thickness over or under 10 mm thickness complete all as specified and directed.

M&L for removal of existing paint surface incl cleaning the surface of wall ceiling with the help of hand held /long hand sander and preparing the surface smooth incl necessary repair to scratches /cracks etc by filling cracks upto 3mm with fiber glass reinforced crack filling compound.

M&L for preparation of old plastered surfaces of wall and applying white putty in two layers and sand papering to have even and smooth surface complete all as specified and directed.

M&L for preparation of surface and applying one coat exterior water based primer with airless spray technology with max working pressure of 3300psi and capable of operating single spray gun with a max material house length of 30mts. The sprayerer should be of reputed make as approved by GE complete all as specified and directed.

M&L for applying two coats of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon adhesive that offers anti angle high performance exterior wall finish with eight years of performance warranty by manufacturer applied using air less technology with max working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length 30 Mtr the spray should be of reputed make as specified by paint supplier and as mentioned in PS and accessories for applying the exterior emulsion should be able to spray in hard to reach areas and achieve the good wounding and penetration of paints on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for applying high quality acrylic modified resin based texture of Dholpur/red sand stone pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 Kg /10sqm to form film of 1-1.5mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface , followed by top coating with premium acrylic smooth exterior paint with silicon additives of required shade by two or more coats @ 1.43 Ltrs/10Sqm complete all as specified and directed.

M&L for applying two coats of anti - bacterial interior emulsion paint applied using air less technology with max working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length 30 Mtr the spray should be be of reputed make as specified by paint supplier and as mentioned in PS over a coat of water based primer with airless spray technology as specified by paint supplier and as approved by GE. Note : The anti - bacterial interior emulsion paint should be recommended by Indian Medical Association complete all as specified and directed.

M&L for complete removal of existing surface finish of walls and ceilings and applying two coats of Exterior Weather emulsion over a coat of exterior wall primer all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and supplying three coat of white wash complete all as directed by Eng-in-Charge.

M&L for applying two coats of distemper oil emulsion on surfaces of walls all as specified.

M&L for preparation of old decorated surface of wall and ceiling applying one coat of acrylic emulsion (Ist quality) complete all as specified & directed by Eng-in-Charge.

M&L for preparation of old decorated surface of wall and applying one coat of cement base paint on prepared surface of wall complete all as directed by Eng-in-Charge.

M&L for preparation of old decorated surface of including cornices plasters and other wall features by washing, rubbing down and stopping of distempered and painted surfaces and applying one coats of distemper oil emulsion on surfaces of walls complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash all as specified and directed.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 and sealing with fibre glass reinforced crack filing compound complete all as specified and directed.

M&L for preparation of old wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint as specified and directed.

M&L for preparation of old steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surface of wall and ceiling applying one coat of Matt finish synthetic enamel paint as per manufacturer instruction complete all as specified & directed by Eng-in-Charge.

M&L for preparation of old Brick/stone/concrete/asbestos cement/plastered surfaces and applying one coat of synthetic enamel paint all as specified and directed.

M&L for re-writing letters or figures (block roman italic or Indian) using synthetic enamel paint of colour as approved by Eng-in-Charge of not exceeding 30 cm height and not exceeding 5 cm width complete all as specified.

M/s DKS Engineering Works

SHYAM AND SONS ENTERPRISES

Khalil Ahmed and Sons