SPECIAL REPAIR/REPLACEMENT/IMPROVEMENT OF LT DISTRIBUTION NETWORK SYSTEM WITH LT PANEL, EARTHING AND ALLIED WORKS IN THE AREA OF THE AGE E/M HOSPITAL UNDER GE E/M LUCKNOW

Amount

Taking down and Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

All as per serial item No. 1 above but of size 10 Sqmm 4 core

All as per serial item No. 1 above but of size 16 Sqmm 4 core

All as per serial item No. 1 above but of size 50 Sqmm 3.5 core

All as per serial item No. 1 above but of size 95 Sqmm 3.5 core

All as per serial item No. 1 above but of size150 Sqmm 3.5 core

All as per serial item No. 1 above but of size185 Sqmm 3.5 core

All as per serial item No. 1 above but of size240 Sqmm 3.5 core

S & F in replacement GI Pipes “light grade ”, laid in trenches complete with and including fittings 100 mm dia protection for LT Cable complete all as specified and directed.

S & F in replacement GI Pipes “light grade ”, laid in trenches complete with and including fittings 80 mm dia protection for LT Cable complete all as specified and directed.

S & F in replacement GI Pipes “light grade ” laid in trenches/or fixed on pole with suitable clamp with and including fittings 50 mm dia protection for LT Cable complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below 08 cm and above the cable 15 cm under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness (18 cm) shall only be considered for payment

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified and directed.

Boring/Drilling ( horizontally) manually under existing road suitable for passing of GI tubing any bore complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone agregrate) as in coping of pole including necessary form work complete all as specifies and directed.

S&F in replacement straight through joints (Heat Shrink Kits) of size 3.5 core cable 25 to 50 Sq mm. for LT underground cable indoor/outdoor type complete for Armoured ,PVC sheathed Aluminium conductor cables Including excavating earth, identifying the fault, making proper joint of cable after rectification & returning soil back to earth, complete all as specified and directed.

All as per serial item No. 21 above but size 3.5 core cable 70 to 150 Sq mm

All as per serial item No. 21 above but size 185 sqmm to 300 sqmm 3 ½ core

Supplying, transporting, erecting and fixing Steel tubular swaged poles type 410 SP-31 ( 9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work , PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations below pole, PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in around poles and PCC 1:3:6 type C1(using 20 mm graded stone aggregate) as in plinth block , disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ straps with synthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint including taking down/up old existing pole complete all as specified and directed.

M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department)

S & F in replacement synthetic Rubber insulated mat of 1 meter x 2 meter x 10 mm for voltage upto 11KV for electric purpose as per IS 5652-2006( superseding IS 5424) suitable for electric shock safety complete all as specified and directed

Supply , Installing and commissioning of Portable Fire extinguishers Carbon-di- oxide type fire extinguisher of 2 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge Nozzle, bend & horn, wall mounting bracket /floor trolley mounting accessories with suitable signage's 'complete, confirming to IS: 2878.

Supply , Installing and commissioning of Portable Fire extinguishers ABC powder type fire extinguisher of 4 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, discharge hose, wall ilmounting bracket / confirming to IS:15683.

Supply , Installing and commissioning of Automatic type fire extinguisher moduler type ceiling mounted Fire extinguishers Aof 5 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, discharge hose, confirming to IS:15683.

M/S National Electrical and Electronics Services

Yaduvanshi Traders

Diamond Electric Co.

Industrial Traders

M/s Vatsh Raj and co

SAKSHAM SUPPLIERS BUILDERS

K B ENTERPRISES

Unnati Engineers