SPECIAL REPAIRS TO LIVING IN DSC BILLETS AT AF STN NAL

Amount

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25 cm in hard dense soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m deep and 1.50 m wide and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m deep and 1.50 m wide and getting out in hard/dense soil for demolition brickwork below ground level complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer n. exc. 25 cm thick in soft/loose soil, complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Material and labour for Cement concrete type B2 1:3:6 (using 40 mm graded aggregate) as in foundations,filling and mass concrete , complete all as specified and as directed.

Material and labour for posts and struts in fencing , gates incl cutting tops to shape as directed, drilling holes,notching for wire, etc. flat iron fillets incl all necessary drilling, bolting or riveting, etc., drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;, and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc. 10 cm long and 11 to 15 mm dia, complete all as specified and as directed.

Dismantling of chain link fencing, barbed wire fencing & wire mesh etc. any type, complete all as specified and as directed.

Supply only Chain link MS galvanized fencing, any size or type, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, incl provision of binding wire, complete all as specified and as directed.

Supply and fix Galvanised 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

All as per item Sl No 13.00 above but Restraining resecuring including making good staples, complete all as specified and as directed.

Refixing the old chain link fencing with old flat iron nut bolt etc of any size of mesh and any weight, complete all as specified and as directed.

Running welding in repairs thickness of metal to be welded shall n. exc. 6mm, complete all as specified and as directed.

Demolition of plain cement concrete as in Roof / floors and paving any description other than ground floor, complete all as specified and as directed.

Material and labour Cement concrete 1:3:6 type C1 as in roof padding mass concrete using 20mm graded stone aggregate surface fair finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid by torch forced application over a coat of bitumen 85/25 grade applied hot @ 1.20 Kg/Sqm over and including a priming coat with btuminious primer @0.40 litre / sqm including clearing the surface complete over 10 mm thick plaster /screed bed in CM 1:4 on cement concrete on roof , mixed with liquid water proofing compound @200 ml per bag of cement finshed even & smooth without using extra cement complete all as specified and as directed. Note : - Water proofing compound should be measured under separate item.

Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with CM1:3 complete all as specified and as directed.

Material and labour for 40mm thick brick tiles laid on 15mm thick cement morter 1:6 and jointed and grouted in CM 1:3, complete all as specified and as directed.

Material and labour for Providing Cement Concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, on junction of parapet and roof , rounded or chamfered on edges, complete all as specified and as directed.

Supply only Liquid water proofing compound, complete all as specified and as directed.

Demolition of brick work built in cement mortar, complete all as specified and as directed.

Material and labour brick work with sub class ‘B’ bricks in CM 1:6 straight or curved on plan exc 6m mean radious complete all as specified and as directed.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM1:4 complete all as specified and as directed.

Material and labour for Providing PCC louvres and jallies, fixed in repair , type B 0 using 12.50 mm graded stone aggregate set in CM 1:6, 40 mm thick (measured solid), including all mouldings and precast RCC post/frame, complete all as specified and as directed.

Cutting holes into or through brick walls (exc 150 Sqcm but not 400 Sqcm brick wall) built in CM and making good in CM 1:3 or cement concrete 1:2:4 type B-l, complete all as specified and as directed.

Forming jambs, etc. to openings (to foregoingc item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work making good with CM 1:6 , complete all as specified and as directed.

Material and labour for Bedding and pointing to old doors and window frames in CM 1:3, complete all as specified and as directed.

Cutting out old brick walls built in cement mortar , forming toothing for bonding new into old work including value of new materials entering old walls and jointing and pointing in CM 1:6, complete all as specified and as directed.

Cutting openings through brick walls built in cement or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc or cutting out defective brick work for under pinning, incl providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core, etc to store and rubbish not exc. 50m, complete all as specified and as directed.

Demolition of cement concrete unreinforced in (below or above gd level) gd floors and paving n exc 15cm thickness, complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates for sub bases of floor, complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregates for sub bases of floor complete all as specified and as directed.

Material and labour for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregates for sub floors and sub bases for filling undulation under floor tiles or other similar complete all as specified and as directed.

Material and labour for 40 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregates as in floors including finishing concrete surfaces even and smooth with using extra cement complete all as specified and as directed.

Material and labour for 20 mm thick Screed bed or bedding layer of mortar CM 1:4 for laying floor finishes complete all as specified and as directed..

Material and labour for fixed as in repairs, Machine pressed precast concret rubberised interlocking paver block (coloured) pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-35 Grade and over and including 25mm average thickness sand cushioning including PCC 1:1.5:3 type B-0 (using 12.50 mm graded stone aggregate) benching to discontinuous edges of the Paving incl dismantling of old tiles complete all as specified and as directed.

Material and labour for providing PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in road side kerb stone set and jointed in CM1:6 including inserting in ground, with plain fair faces,including chamfers , weatherings, throating etc. complete with joints to match complete all as specified and as directed.

Material and labour for preparation of new untreated concrete surface of any description over 10cm girth or width, not otherwise described and two coat of synthetic enamel paint over and including a coat of primer, complete all as specified and as directed.

Material and labour for Glass dividing strips width of 38 mm and , 3 mm thick inserting as position as per design in floors complete all as specified and as directed.

Material and labour 75 mm thick PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in plinth protection laid in bays and surfaces finished even & fair, complete all as specified and as directed.

Material and labour for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for PCC not exc 100 mmm thick, complete all as specified and as directed.

Demolition of stone slabs of any description or thickness in roof, floors ,suspended slabs , chajjas or similar etc, laid bedded and pointed in any mortar, complete all as specified and as directed.

Material and labour for granite stone slab 18 to 20mm thick as in kitchen plateform / flooring/ wash basin counters laid over and incl 20 mm thick screed bed in CM1 :6 and jointed and pointed with cement mixed with pigment to match the shade of stone including cutting opening ( of any shape and size ) , cutting,rubbing and polishing surface and rounding of edges and as any colour as approved by GE, complete all as specified and as directed.

Material and labour for granite stone slab 18 to 20mm thick as in vertical surfaces over and incl 10mm thick rendering with CM1:4 and jointed and pointed with cement mixed with pigment to match the shade of stone including cutting rubbing and polishing surface and rounding of edges and as any colour as approved by GE, complete all as specified and as directed.

Material and labour Machine cut green marble stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6. complete all as specified and as directed.

Material and labour for machine cut Kota Stone slab as in flooring / landing of stairs , 18-20mm thick over and including 15mm thick cement screed bed in CM 1:4 , laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab and including rubbing and mirror polishing complete all as specified and as directed. Note : Mirror polishing shall be seven cut mirror polish.

Material and labour Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.

Grinding and Mirror polishing to existing floor of marble stone/kota stone/terrazzo flooring by power grinding mechnically operated machine to achieve required mirror finish with using approved quality grinding stone (Butti) No 01 to 06 up to achieving mirror polishing in 07 times and aftter grinding the surfaces spreading wooden powder (Burada) over the cut surfaces and finally cleaning the surfaces, complete all as specified and as directed.

Supply and fix in repair Stainless Steel (SS grade 305 ) letters of size 250mm x 350 mm consisting 60mmx40mm hollow SS pipe of wall thickness 1.50 mm for signage/display boards including engraving in granite stones (if required) all of size as per sample kept in GE office complete all as specified and as directed.

Dismantling floor,hearth or wall tilling including CM bedding (but not backing), removing serviceable tiles to store and rubbish off premises complete all as specified and as directed.

Material and labour for non skid coloured ceramic jointless tiles 7 to 8mm thick (squared or rectangular ) area of each exc 0.11 sqm but n. exc 0.18 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for non skid coloured ceramic jointless tiles 7 to 8mm thick (squared or rectangular ) area of each exc 0.11 sqm but not exc 0.18 sqm as in skirtings , set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in CM1:4 complete all as specified and as directed.

Material and labour for non skid coloured ceramic jointless tiles 8 to 10mm thick (squared or rectangular ) area of each exc 0.18 sqm but not exc 0.38 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cerment to match, over and including 15mm thick screed bed in CM(1:6) complete all as specified and as directed.

Material and labour for non skid coloured ceramic jointless tiles 8 to 10mm thick (squared or rectangular ) area of each exc 0.18 sqm but not exc 0.38 sqm as in skirtings , set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in CM1:4 complete all as specified and as directed.

Material and labour coloured chequered cement concrete tiles 25cmx25cmx25mm thick machine pressed set ,jointed and pointed in neat cement slurry in floors over a 20mm thick screed bed in (CM 1:4) complete all as specified and as directed. Note : Screed bed to be measured separately

Material and labour glazed coloured ceramic tiles 300mmx450mmx7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 10 mm thick rendering in CM1:4 complete all as specified and as directed.

Material and labour non skid coloured ceramic tiles (300x300x7)mm thick in floor set and jointed in neat cement slurry and pointed in coloured cerment to match, over and including 15mm thick screed bed in CM(1:6) complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for including seperating of reinforcement, scraping and cleaning of reinforcement, complete all as specified and as directed.

Material and labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in footings, beams, plinth beam, bases for columns etc. complete all as specified and as directed.

Material and labour reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs, suported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Material and labour formwork to soffits of suspended slab such as roof slabs, floor slabs, shelves, chajjas, landings and similar work not exc 200 mm thick horizontal or sloping , rough finished flat surfaces complete all as specified and as directed.

Material and labour for RCC 1:2:4 (Nominal Mix) Type B1 (using 20mm graded stone aggregate) as in beams, columns, cantilevers, bressumers, lintels , RCC copings of compound walls over 1.50m span complete all as specified and as directed.

Material and labour for RCC 1:2:4 (Nominal Mix) Type B1(using 20mm graded stone aggregate) as in chhajjas , shelves or similar works complete all as specified and as directed.

Material and labour for form work for concrete flats teads exc 5 cm but n exc 10cm wide rough finished complete all as specified and as directed.

Material and labour formwork to sides and soffits of floor and roof beams, lintels, footing, columns, cantilevers shelves including supports etc rough finished surface of concrete complete all as specified and as directed.

Supply and fix mild steel TMT bars 10mm dia and over, cut to length & bent to shape required including cranking, bending spirally for hoping for column, hooking ends & binding with and including mild steel wire not less than on 0.9mm dia or securing with clips, complete all as specified and as directed.

All as per item Sl No 69.00 above but 5mm dia and over upto and including 8mm dia in in stirrups, spacers and binders complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in CM1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed.

Dismantling framed /independent timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Refixing only steel tubular members framed/independent with necessary cleats ,fixtures and fastenings complete all as specified and as directed.

Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including welding ,distance pieces, gusset plates ,cleats,base plates and neccesary fastenings complete all as specified and as directed.

Supply and fix for Rolled sections as in main and cross beams, columns, hip and jack rafters; purlins where connected to common rafters and fixed with angle cleats, base plates, or other connecting plates, neccesary fastners including welding complete all as specified and as directed.

Supply and fix Mild steel rag or lewis diameter of neck 25mm bolts, screwed one end with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised exc 22.5cm and n exc 30cm long complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B1 as in bed blocks and similar items including necessary arrangemets ,templates ,temperory shuttering for grouting bolts/plates etc complete all as specified and as directed.

Supply and fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc complete all as specified and as directed.

Dismanteling of Asbestos cement (corrugated semicorrugated etc ) sheets in roof covering complete all as specified and as directed.

Supply and fix pre-painted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws with bituminous washer complete all as specified and as directed.

Supply and fix pre-painted galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/ cladding to wall fixed with self taping screws with bituminous washer complete all as specified and as directed.

Supply and fix of bands straps supports, wind ties or stays including washers and similar small articals for securing AC/GI sheets,RWP or other similar works etc complete all as specified and as directed.

Material and labour for painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces, complete all as specified and as directed.

Taking down of cement plaster on brick/stone surfaces including raking out joints haking for key scrubbing down with water complete all as specified and as directed.

Material and labour for 15 mm thick cement plaster in CM 1:6 on other than fair faces of brick or concrete surfaces finished even & smooth without using extra cement, complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper emulsion over and including one coat priming coat over and including 3 mm thick walll care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour rendering 15mm thick in CM1:4 on fair faces of brick/concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint of approved tint shade over a coat of approved primer on wall as in camouflage/ plain pattern complete all as specified and as directed.

Material and labour 10 mm thick cement plaster in CM 1:3 on fair faces of brick or concrete surfaces of ceilling finished even & smooth without using extra cement, complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Material and Labour for preparation to old decorated surfaces of wall including washing rubbing down and stopping of distempered or painted surfaces including all cornices, pilasters etc( plastered or unplastered) etc and applying two coat of acrylic exterior emulsion paint of approved colour/shade as in camouflaging pattern complete all as specified and directed by complete all as specified and as directed.

Material and Labour for complete removal of old decorated surfaces of wall (plastered or un-plastered) or painted surfaces etc and applying two coat distemper oil bound emulsion (white or tinted) over and including a 3mm thick wall care putty and one coat primer complete on walls complete all as specified and as directed.

Material and labour for preperation of old plastered undercorated surface of ceiling of and applying two coats of white wash complete all as specified and as directed.

Taking down door/window frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and as directed.

Taking down of chowkhat or frames exc 1.50 sqm but n.exc 4 Sqm withotut taking of shutters from frame complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but n. exc. 2 Sqm each complete all as specified and as directed.

Supply and fix factory made 100 % Solid Wood plastic composite (WPC) waterproof, termite proof , fire resistant door frame 125mm x 65 mm double riveted made from wood plastic composite ( Single Extruded Process ) material with density 780 kg /Cum , complete all as specified and as directed.

Supply and fix factory made 100 % Solid Wood plastic composite (WPC) waterproof , termite proof, fire resistant door frame 75mmx50mm Single riveted made from wood plastic composite (Single Extruded Process) material with density 780 kg /Cum, complete all as specified and as directed.

Supply and fix factory made 20 mm thick PVC shutter printed one side with one coating of ultra voilet chemical , glossymate finish inc 100% termite / water proof ,fireratrandnteco friendly, weight not less than 12 kg per sqm complete all as specified and as directed, manufacture specification as per drawing, complete all as specified and as directed. Make : (a) M/s HR Enterprises, Pathankot. (b) Door Craft Industry, Delhi. (c) M/s Trehan Doors Pathankot Note : The Shutter is to be fixed with 50 mm size self drilling star screws full threaded.

Supply and fix factory made solid UV (ultra volieted ) wood grain printed panelled / plain PVC single piece door shutter 30mm thick style, consisting of frame made out of MS tube 19 gauge thickness and size of 25mmx25mm for stiles, top and bottom rails MS frame shall have a coat of steel primers. The frame shall be covered with heat moulded wood grain UV printed PVC sheet tape fixed in MS frame welding sealed to the styles and rail with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed, manufacturer specification, complete all as specified and as directed. Make : (a) M/s HR Enterprises, Pathankot. (b) Door Craft Industry, Delhi. (c) M/s Trehan Doors Pathankot Note : The Shutter is to be fixed with 50 mm size self drilling star screws full threaded.

Supply and fix 34/35mm thick factory made single piece wire gauge door / shutter solid PVC UV printed doors - Wood Free consisting of 5mm thick solid PVC sheet on both side (both side mulit colour UV printed) using steel / aluminium XPM/wiremesh and consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 19mm x19mm for the top, bottom and lock rails with PVC beading in all around. M. S. frame shall have a coat of metal primers. MS Frame shall be covered with heat moulded (Rigid) 20/22mm PVC solid sheet at styles, top rail and bottom rail (Rigid) MS Frame welding sealed to the style and rail with sutiable PVC Sheet beading and joined together with solvent complete all as specified and as directed and as per manufacturer’s specification and drawing, complete all as specified and as directed. Make : (a) M/s HR Enterprises, Pathankot. (b) Door Craft Industry, Delhi. (c) M/s Trehan Doors Pathankot Note : (i) Sample kept in AGE B/R office for verifying. (ii) The Shutter is to be fixed with 50 mm size self drilling star screws full threaded.

Supply and fix in repair Curtain rod 25 mm dia 0.80 mm wall thickness, mild steel, chromium plated including supporitng and end brackets as per sample complete all as specified and as directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, cut nails, GI wire stapel or with wooden beading complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement concrete 1:2:4 type B-1 as required depth of embedded portion exc half brick but n. exc. one brick complete all as specified and as directed.

Supply and fix in repairs 300mm,ordinary steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix door stopper hanging type, aluminium anodised natural shade matt finish with quality rubber of size 140mm, complete all as specified and as directed.

Supply and fix Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gaused Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) pintol hinges 12 x 75 mm - 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c. (viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) Two coat of Synthetcitc enamel paint over one coat of primer (x) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in glazed / gazed skelton shutter of window (xi) 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane fixed in glaxed / gazed skelton shutter of window. (xii) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.

Material and labour for anodised aluminium frame for doors,windows,sliding windows , ventilators,partition with one or more rebates incl joining cleat for fixing etc, complete all as specified and as directed. Note. Prelaminated parcticle board/glass measured separately.

Supply only double action floor door spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Supply only door closure Aluminium Extruded section hydraulically regulated designation No 03 universal type , suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply and fix 4.80 mm thick sheet glass of ordinary quality plain/tinted and glazing with rubber beads, clips etc complete all as specified and as directed.

Supply and fix steel ventilator with top hung shutter including box type hinges, steel peg stay, complete all as specified and as directed.

Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane, complete all as specified and as directed.

Material and labour for 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

Supply and fix 150 mm size Aluminium handles extruded section, cast type anodised, complete all as specified and as directed.

Supply and fix Medium weight cold rolled mild steel 100 mm hinges, complete all as specified and as directed.

Material and labour for 150 mm long Aluminium anodised,barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

Dismantling of wall /ceiling boards (fibre , PVC , Pulp , insulation etc ) of any description,any thickness including frame/grid , fillets work etc complete all as specified and as directed.

Material and labour for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed.

Material and labour for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification, complete all as specified and as directed.

Dismantling of false ceiling of any description,any thickness including frame/grid workcomplete all as specified and as directed.

Material and labour for Anodised Aluminium Snap Grid for False Ceiling all as specified & Providing and fixing Gypsum Board 12mm thick in ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long fixed and 4mm with screw as per manufacturers instructions and applying two coat of oil bound distemper over a coat of birla wall care putty on ceiling including preperation of newly untreated surface, complete all as specified and as directed.

Supply and fix mild steel work as in door frames , window guard bars fixed independently and similar articles conforming to Fe-290 Gde-165 complete all as specified and as directed.

Hacking out old broken glass of any thickness/size of any description from wooden frames/metal frame glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix sheet glass oridinay quality 4mm thick, in squares n.exc 0.5 sqm each fitted with oil putty or wooden beading complete all as specified and as directed.

Supply and fix one side frosted sheet glass 4mm thick, in squares n.exc 0.5 sqm each fitted with oil putty or wooden beading complete all as specified and as directed.

Material and labour for painting one coat of synthetic enamel paint on old wooden surfaces of girth exc 10cm , including preparation of surfaces, complete all as specified and as directed.

Material and labour for painting one coat of synthetic enamel paint on old steel surfaces of grith exc 10cm , including preparation of surfaces, complete all as specified and as directed.

Supply and fix PBI Sheet 1mm thick shutter with box type steel frame for built in up cupboard,almirah etc incl applying two coats of synthetic enamel paint over a coat of red oxide primer on both surfaces and locking arrangement with 4 lever lock complete and including taking down chowkhats with shutter complete all as specified and as directed.

Taking up or down steel tubing and connection of 15 mm bore, complete all as specified and as directed.

Taking up or down steel tubing and connection of 20 mm bore, complete all as specified and as directed.

Supply and fix 15 mm bore dia medium grade , galvanised, with all fitting and fixed complete to walls etc, complete all as specified and as directed.

Supply and fix 20 mm bore dia medium grade , galvanised , with all fitting and fixed complete to walls etc, complete all as specified and as directed.

Dismantling of water tanks of capacity exc 500 ltr but n.exc. 1000 ltr of any description, complete all as specified and as directed.

Supply and fix 1000 ltr capacity rotational moulded polythylene triple layered white coloured storage water tank, ISO certified (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and as directed.

Supply and fix 20mm PTMT nipple suitable for HDPE water tank (minimum weight 15 mm-38gms/20mm-45gms/25mm-65gms) complete all as specified .

Supply and fix ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia, complete all as specified and as directed.

Supply and fix in repair Gun-metal of size 20 mm, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, screwed both ends for iron pipe of 20 mm dia pipe complete all as specified and as directed.

Supply and fix as in repair 15mm stop valves/Angle valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with flange cap, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. Make : Jaquar, Prayag, Marc.

Supply and fix as in repair 15mm bore concealed fancy type chromium plated stop valves, cast copper alloy, screwed down, high pressure with flange cap screwed both ends for iron pipe or for GI pipe/unions and fixed, complete all as specified and as directed. Make : Jaquar, Prayag, Marc.

Supply and fix as in repair 15mm dia bib taps, long shank , cast copper alloy with crutch or butterfly handle, screwed down, crewed with flange cap for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. Make : Jaquar, Prayag, Marc.

Supply and fix as in repair fancy type pillar taps of 15mm dia, cast copper alloy with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed. Make : Jaquar, Prayag, Marc.

Supplying and fix in repair Table top viterous chinaware wash hand basin light colour/white of size 560x410x180mm , including chain, plug, porcelain rubber stopper, CI brackets, inlcluding taking out of old WHB & making necessary connections complete all as specified and as directed.

Supply and fix PVC connections as in repair 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.

Supply and fix as in repair 100 mm dia CP circular grating, complete all as specified and as directed.

Material and labour cast iron Nahani trap 100mm out let dia meter with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed..

Supply and fix in repair chromium plated Square shower 85mm size with 225 mm Arm with or without swivel joints, for fixing with 15mm bore pipe all as specified, complete all as specified and as directed. Make : Jaquar, Prayag, Marc.

Supply and fix as in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and other and fixed complete all as specified and as directed.

Supply and fix 32mm dia PVC waste pipe for for WHB, sink etc complete all as specified and as directed.

Supply and fix as in repair CP ( brass body ) Towel Rail 450mm long fixed with and including Chromium plates brass screws and wooden /plastic cleats (minimum weight 170gms ) complete all as specified and as directed.

Supply and fix 100mm dia Stainless steel ( SS 304 Grade ) Grating with waste hole and fixing with White cement to trap complete all as specified & directed, complete all as specified and as directed.

Supply and fix in repair stainless steel ( SS 304 grade ) sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste pipe, waste coupling cast iron cantilever brackets, connecting union overall size 915mmx460mmx203 mm with bowl size 405mmx354mmx203mm fixed in repair complete all as specified and as directed.

Supply and fix as in repair Health faucet with 1.00m flexible chromium plated tube and hook fixed to angle valve etc complete all as specified and as directed. .

Supply and fix as in repair sink mixer with regular spout T/M ( Swing spout), fancy type chromium plated, screwed for iron pipe 15mm bore dia , fixed in repair complete all as specified and as directed. Make : Jaquar, Prayag, Marc.

Supply and fix as in repair Toilet paper holder box type brass CP anodized fixed to wall, in repair with chromium plated brass screws, complete all as specified and as directed.

Supply and fix as in repair wall mixer 3 in 1 with 'L' bend, chromium plated fancy type including three joints and to steel pipe or union for 15mm bore pipe fixed in repair, complete all as specified and as directed. Make : Jaquar, Prayag, Marc.

Supply and fix in repair flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including all joints complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) pipes double socketd, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed.

All as per Item Sl No 163.00 but 75 mm dia, complete all as specified and as directed.

S/F PVC (SWR) bends plain 75 mm dia, complete all as specified and as directed.

Supply and fix PVC (SWR) bends of 110 mm dia, complete all as specified and as directed.

Supply and fix PVC vent cowl 75 dia complete all as specified and as directed.

Supply and fix 110 mm dia PVC (SWR) pipes double socketd, in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix PVC (SWR) junction single TEE equal or unequal of 110 mm dia, complete all as specified and as directed.

Supply and fix PVC (SWR) Reducer 110x75mm of 110 mm dia, complete all as specified and as directed.

Supply and fix in repair vitreous china squatting pan of orissa patters long size 580 x 440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest but excluding flushing cistern including PCC ( 1:5:10 ) complete all as specified and as directed.

Supply and fix as in repair PVC valve less syphonic action type low level flushing cisten of 10 litres capacity white wash inlet hall valve float side handle, for low level fixed to squat pattern closet incl all joints and making good the floor complete all joints and making good to floor, complete all as specified and as directed.

Supply and fix in repair vitreous china white wash down water closet pan (padestal pattern) including plastic seat cover with CP hinging device ,excluding fixing bolts,flushing cistern and flush pipe & including connection to trap, drain pipe, flushing cistern & anti syphonage pipe ccomplete all as specified and as directed.

Material and labour salt glazed stone ware gully traps 150x150mm , square mouth "P" type complete all as specified and as directed.

Dismantling of 150mm/100mm/75mm bore cast iron,SGSW or reinforced concrete drain pipes, jointed in CMand taking out of trenches, complete all as specified and as directed.

Demolition of 100mm/ 75mm dia PVC drain and rain water pipe set in cement mortar, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe aand rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cementt concrete 1:2:4 type B-1 smooth finished, and reforming benching as required dia of pipe 100 mm bore, complete all as specified and as directed.

Material and labour Concrete bed in PCC 1:4:8 type D2 to drain pipes of dia 150 mm RCC Pipes including packing under,and haunching, against the sides of pipes after they are laid and tested, complete all as specified and as directed.

Supply and fix Reinforced concrete pipes , class NP2 , 150mm bore with collars laid in trenches, jointed and tested, complete all as specified and as directed.

Material and labour PCC 1:2:4 type B1 using 20mm traded stone aggregate as in Coping /benching including necessary form work and finishing for manholes all exposed surfaces of brickwork complete all as specified and as directed.

Supply and fix precast RCC 1:2:4 type B1 as in cover slab set in CM 1:6, complete all as specified and as directed.

Material and labour for PCC type C2 1:3:6 using 40 mm graded aggregate as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished channel and drain 30 cm inner girth in cement concrte using extra cement, complete all as specified and as directed.

Material and labour for sand cushioning using dry and clean tibba sand in two layers, first laylers of 80 mm thick before laying of cable and second layer of 150 mm thick after laying of cable in trenches/ ducts including consolidation of each layers , complete all as specified and as directed.

Supply and laying well burnt brick sub class B old size laid in trenches perpndicular to axis to the ground cable, complete all as specified and as directed.

Taking out old uncerviceable cable XLPE/PVC sheathed 1110 volts grade armoured with aluminum conductor of any size from trenches, wall, poles, under floor etc, complete all as specified and as directed.

Suplying, laying, jointing and testing of under ground cable XLPE insulated , 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 50 sqmm laid in trenches/ duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and as directed.

All as per Item Sl No187.00 above but aluminium conductor 2 core 10 sqmm bolts complete all as specified and as directed.

Material and labour for earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.50m below ground level. The earth plate to be connetced with earth lead of 4 mm dia galvanised iron or steel wire all as shown in Electrical Plate No 3 the earthing test point , complete all as specified and as directed. The GI earthing wire to be protected by galvanised iron pipe 20mm bore (medium grade) up to ground level and there after with 20mm dia HDPE pipe up to test point. Earthing shall be include with providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) up to 90 cm all around earth plate further filled with tibba sand up to ground level. Earthing shall also be include for providing concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work.

Taking down DB/ main switch of any size and making good disturbed surface of wall/ floor complete all as specified and directed. Note:- Temporary power supply shall be provided by contractor, complete all as specified and as directed.

Taking out carefully the existing burnt sub main wiring of size 4 Sqm / 6 Sqmm PVC insulated multi stranded aluminum conductor cable along-with earth continuity conductor from the PVC / rigid steel, concealed/surface conduit and making good the distubed surface, complete all as specified and as directed.

Taking down carefully point wiring (Light, fan, socket) complete including fittings such as switches, Ceiling roses, pendants, regulator, sockets etc removing from site of work and making good to the disturbed surfaces of walls/floors etc all as specified and directed Note:- Temporary power supply shall be provided by contractor, complete all as specified and as directed. Note:- Serviceable tube light fitting shall be removed carefully for reuse.

Supply and laying Sub main wiring (concealed) complete with 03 runs (Phase, Neutral & Earthing colour code) of single core 4 sqmm fire retardant low smoke (FRLS) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including non metalic regid PVC medium conduit & conduit 20 mm dia ISI marked and allaccessories including cutting chasing in walls for concealed wiring using mechine and making good the disturbed surface ccomplete all as specified and as directed. Note :- 3 run of 4sqmm and 1 run of PVC conduit shall be measured as single unit length.

Supply and laying MCB TP 63 Amps 16KA conforming to IS-8623, 415 Volts 50 Hz incl making necessary incoming and outgoing connection with suitable size of copper lugs etc, ccomplete all as specified and as directed.

Supply and laying Sub main wiring (concealed) complete with four run (3 phase + neutral) of 6sqmm fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded copper conductor cable LT 1100 V grade drawn through in 25mm dia non metalic regid PVC medium conduit and conduit accessories including 6 sqmm fire retardant low smoke (FRLS) PVC insulated unsheathed multi stranded copper earth cable connected to common earth dolly complete including cutting chasing in walls for concealed wiring using mechine and making good the disturbed surface complete all as specified and as directed. Note :- 5 run of 6sqmm and 1 run of PVC conduit shall be measured as single unit length.

Material and labour for Point wiring (concealed) with PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable of 1.5 sqmm in and including PVC concealed rigid conduit heavy duty (ISI mark) and pressed steel terminal boxes (for mounting switches / sockets /regulators / ceiling roses etc) made out of MS sheet not less than 1.6 mm and 6cm depth including painting with one coat of red oxide primer on internal and external surface covered with 3mm thick laminated plastic sheet ISI marked including 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) multi stranded copper conductor cable as earth continuity wire connected to common earth and each terminal box/fitting all as specified and directed for the following:- . (a) One light point controlled by one switch Note :- (i)The wiring shall be provided in standard colour code i.e. Red for Phase, Black for Neural and Green for earth. (ii) The quoted rate is deemed to include for cutting/chasing for concealing the conduit and making good the surface to match the existing surfaces. (iii) In case of ceiling portion where concealed conduiting is not possible, the surface conduit shall be provided as directed. (iv) The earth wire shall be connected to common earth and each terminal boxes and fitting all as directed.

(b) All as per Item Sl No196.00 above but One ceiling fan point controlled by one switch.

(c) All as per Item Sl No196.00 above but One exhaust fan point contrelled by one switch.

(d) All as per Item Sl No196.00 above but One switch socket outlet 3 pin 6 Amp on same board.

All as per item Sl No 196.00 above but here in before one 3 pin socket outlet 5 Amp on indipendent board, complete all as specified and as directed.

All as per Item Sl No196.00 above but here in before One 3-pin socket outlet 15 Amp on independent board with 2.5sqmm FRLS cable including 2.5sqmm FRLS multistranded copper cable as earth continuity wire, complete all as specified and as directed. Note for item No 196.00 to 201.00:- The disturbed surface of wall for concealing the wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surface. The rate of point wiring shall be deemed to include the cost of making good

Supply and fix energy saving decorating box type batten light fitting 230 volts surface mounted complete with high effeciency PMMA diffuser soft glare free light LED lamp 20 watt blue coloured end caps with all accessories, pre- wired, including providing flexible copper wire twin core cable complete all as specified and directed by enginer in charge, complete all as specified and as directed.

Material and labour for refixing the old serviceable existing LED/FTL 20/40 watt any make obtained from item Srl No 192.00 above, complete all as specified and as directed. Note:- Serviceable tube light fitting shall be removed carefully for reuse.

Supply and fix flood light fitting 45 watt LED 230 volt, new generation energy saving, environment friendly, long life inclusive innovative die cast aluminum IP65 with power LED as light source complete all accessories prewired incl GI bracket with 32mm GI pipe, bend to shape and connecting up with 1.5sqmm multi stranded copper wire from ceiling rose to fitting, complete all as specified and as directed.

Suply and fixing Lamp holder angular PVC polycrbonate type with back plate suitable for PVC casing capping/conduit fitting, complete all as specified and as directed.

Supply and fix LED bulb 7 watt with lumen 600 complete all as specified and as directed.

Supply and fix in repair stepped type electronic fan regulator 100/120 watt , SP 230 Volt 100 watt complete all as specified and as directed.

Supply and fix socket out let 5 pin 6 amp multipurpose, flush type complete all as specified and as directed.

Supply and fix Socket out let 2 in 1, 3 pin, 5 and 15 amp multipurpose, flush type complete all as specified and as directed.

Supply and fix Switch piano flush type single pole one way 5/6 amp complete all as specified and as directed.

Supply and fix Switch piano flush type single pole one way (multi pin) 16 amp complete all as specified and as directed.

Supply and fix Ceiling rose surface Bakelite 65 x 50 mm three terminals complete all as specified and as directed.

Supply and fix in Repair sheet metal enclosure single pole and neutral encolsure with two pin and earth plug and socket complete with provision for fixing of one MCB SP 20 Amps complete all as specified and as directed for geyser.

Supply and fix vertical TPN DB double door with & incl 100 Amp MCCB, IP 45 protection with powder coated enclosure 4 way insulated busbar assemblyo rating 200 Amps including MCCB 4 pole, 415 V, 100 A, 16 kA - 01 No complete all as specified and as directed.

Supply and fix sheet metal enclosure for SPN DBs with double door for incorporating MCBs IP 43, 8 way with 200 amp rated busbar, 240 volts as per IS 8623, complete all as specified and as directed.

Supply and fix sheet metal enclosure for SPN DBs with double door for incorporating MCBs IP 43, 12 way with 200 amp rated busbar, 240 volts as per IS 8623, including taking down old unserviceable single phase DBs, complete all as specified and as directed.

Supply and fix sheet metal enclosure for SPN DBs with double glazed door for incorporating MCBs IP 43, 4 way with 200 amp rated busbar, 240 volts as per IS 8623, complete all as specified and as directed.

Supply and fix sheet metal enclosure for DBs with double door for incorporating MCBs IP 43, TPN 4 way with 200 amp rated busbar, 240 volts as per IS 8623, complete all as specified and as directed.

Supply and fix MCB four pole 63 Amps 16 KA conforming to IS 8623 415 volts 50 Hz including making necessary incoming and outgoing connection with suitable size of copper lugs etc. complete all as specified and as directed.

Supply and fix MCB SPN 40 Amps 10 KA 240 volts 50 Hz including making necessary incoming and outgoing connection with suitable size of lugs etc. complete all as specified and as directed.

Supply and fix MCB SP 6 to 32 Amps 10 KA 'C' curve 240 volts 50 Hz including making necessary incoming and outgoing connection with suitable size of lugs etc. complete all as specified and as directed.

Taking down ceiling fan and removing the same to MES store for reuse, complete all as specified and as directed.

Material and labolur for taking down geyer of any capacity after disconnecting of electric connection and deposit in store and refixing after completion of civil work & connection, complete all as specified and as directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including cutting and making of suitable hole for fixing of exhaust fan and making good the disturbed surface, complete all as specified and as directed.

Material and labolur for servicing, painting of ceiling fans complete, with synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust refixing the ceiling fan in original position and connecting, complete all as specified and as directed.

RAJENDER ENTERPRISES