Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹36.5 L+₹55,562.14 (1.54%)Rejected-AOC VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L2 | Rejected-AOC L2 BIDDER | |
| 3 | L3₹36.7 L+₹67,316.74 (1.87%)Rejected-AOC J L BHAWAN MANKAR ROAD BUD BUD BAZAR PO BUD BUD DISTT BURDWAN WB | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L3 | Rejected-AOC L3 BIDDER | |
| 4 | L4₹38.5 L+₹2.5 L (6.93%)Rejected-AOC | L4 | Rejected-AOC L4 BIDDER | |
| 5 | L5₹38.7 L+₹2.7 L (7.63%)Rejected-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L5 | Rejected-AOC L5 BIDDER |
Tender Value
₹43.6 L
EMD Value
₹87,500
Closing Date
1 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PROJECT PANAGARH
GE PROJECT PANAGARH PO PANAGARH DIST BURDWAN PIN 713420
PROVN FOR OFFICE ACCN FOR AGE B/R-I AT GE (P) PANAGARH UNDER GE (P) PANAGARH
2023_MES_578364_1
8181
Open Tender
Civil Works
Item Rate
180 days
GE PROJECT PANAGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE PROJECT PANAGARH
₹87,500
Yes
18 Mar 2023
1 Feb 2023
3 Mar 2023
1 Feb 2023
1 Mar 2023
15 Feb 2023
Amount
Excavation in trenches n exc 1.5m deep and n exc 10 sqm on plan area and getting out in Soft/loose soil complete all as specified and directed.
Excavation in trenches exc 1.5m and n exc 3m deep and n exc 10 sqm on plan area and getting out in Soft/loose soil complete all as specified and directed.
M&L for Hard core of broken stone or boulders of guage exc 63mm but n ec 100mm , deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface
M&L for PCC 1:4:8, type D2 (40mm graded aggregate) as in fdn filling and mass concrete.
M&L for Reinforced cement concrete M-25 design mix (20mm graded aggregate) in foundation footings, bases for column, plinth beam etc complete all as specified and directed.
M&L for Reinforced cement concrete M-25 design mix (20mm graded aggregate) as in Columns complete all as specified and directed.
M&L for Reinforced cement concrete M-25 design mix (20mm graded aggregate) in beams, lintels over 1.5m span complete all as specified and directed.
M&L for Reinforced cement concrete M-25 design mix (20mm graded aggregate) in Chajjas complete all as specified and directed.
Form work to sides of concrete foundations, footings, bases of columns, plinth beams and similar work vertical or batter for flat rough finished surfaces of concrete.
Form work to sides of pillars, posts, struts piers, columns and similar work square, rectangular or polygonal for flat rough finished surfaces of concrete.
Form work to sides and soffits of floor or roof beam, beam haunchings, girders, lintels, cantilevers shelves including supports, overhangs, etc and similar work for flat rough finished surfaces of concrete.
M&L For TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colunms, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L For TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for colunms, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L For TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m nean radius, built in CM 1:6.
Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth using extra cement..
Rendering 20 mm thick in two layers of 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement. Second layer will be mixed with WPC @ 2%. Note: WPC will be paid separately as supply only.
Supply only integral water proofing compound. Make:- Sika /Pidilite / CICO No 1 / ACCRO No 1 /FOSROC
M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 3 mm thick wall care putty on wall plastered surface complete all as specified and as directed. Make:- Paint:- Jotun India Pvt Ltd / Jadoo (Bergar) / elvet Acrylic / Distemper (Crimson Paint Pvt Ltd) / British Paint / (Nerolac) Putty:- Berger / J&N / Birla Laval Plast / Shalimar Paints / Asian Paints.
Two coats of cement base paint, first quality, over a coat of cement primer on newly plastered surfaces of wall including preparation of walls etc. Make:- Jotun India Pvt Ltd./ Snowcem Plus / Berger / Asian Paints (Gutucam / Crimocem Super Cement paints
S&F Pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete as specified. Make:- corporation / Doorwyn industries / Madhu industries / Ajanta Ispat / Alusys. / M/s GS Udyog / M/S Ashish Industries
S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply,2nd class HW rail & style, the size of rail and stile as per IS: 1003 (part 1), klin seasoned and chemically pressure treated.. Specie:- Sal / Bijasal / Benteak / Laurel/Hollock ,Chikrassy/, Gamari/, badam /kalasiris. Make:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products.. .
S&F Steel windows, conforming to IS, both (inside gauged and outside glazed) glazed and gauged type side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. (Note : Glass and wire mesh shall be measured and paid separately). Make:- B A Enterprises / Multiwyn Industrial Corporation Doorwyn Industries / Modern Fabricator / Madhu Industries / Ajanta Ispat / ) Alusys
Two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces of any description , over 10cm in width or girth, not otherwise described including preparation of surfaces. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd
Two coats of synthetic enamel paint, first quality, over a coat of pink primer on wood based surfaces of any description , over 10cm in width or girth, not otherwise described including preparation of surfaces. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd
S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane. Make"-Saint-Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan Pilkington Glass / Triveni Float Glass / IAG.
S&F 300mm sliding bolt of aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F 125mm aluminium handles, cast type, anodised
S&F 200mm aluminium , anodised, barrel tower bolts of extruded section and fixed.
S&F 100mm butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21
S&F aluminium locking bolts, anodised, with bolt not less than 10mm dia , 100 mm size.
S&F 125mm aluminium , anodised, barrel tower bolts of extruded section and fixed. Make for item Nos. 27 to 32:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag..
S&F MS wind tie, guard bar and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for cement concrete type B0, 1:3:6 (12.5mm graded aggregate) as in pressed steel frame, hold fast etc including caps and bases.
M&L for mixing of fly ash, clinker & stone dust in proportion of 1:3 :6 (i.e 10% Fly ash, 30% Clinker and 60% Stone dust materials) laying , watering , ramming compaction complete.
M&L for 100mm thick, cement concrete type D-2, 1:4:8 (40mm graded agregate) in flooring, etc complete.
M&L Vitrified ceramic tiles light shade 08-10mm thick (Square/rectangular) polished, area of each tiles exe. 0.42 Sqm but n.exe. 1.0 Sqm in floor, skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete.
M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying of floor finishes.
M&L for joint free coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match.
All as per item No39 but as in skirting, over 10 mm thick in CM 1:4. etc complete. Make for item Nos. 37, 39 & 40:- Kajaria Ceramic Ltd.(ii) Asian Granito India Ltd.(iii) Nitco(iv) Somany Ceramics Limited(v) Varmora Granito Pvt Ltd.(vi) H&R Johnson India / Orient Bell Ltd.
M&L for Hard core of broken stone or boulders of guage n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface
M&L 75mm thick PCC type C2, 1:3:6 (using 40mm graded stone agg) in plinth protection finishing the surface fair and even including provision of grooves 10mm wide @ 1.50m c/c filled with mastic bitumen. Make of bitumene:- STP / Tikitar / Choksy Chemicals.
Return filling in, including spreadding, leveling, watering, and well ramming in layers not exc 25 cm in soft loose soil.
Removing excavated material n exc 50m and depositing where directed at alevel n exc 1.5m above the starting point.
S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc . Conforming to Fe-410 W (Gde -E-250) quality A, etc complete. Make:- JIndal TATA / Sail.
S&F pre painted galvalume aluminium zinc coating GI based corrugated corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified..
S&F pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make for item Nos. 46 & 47:- M/STataBluescope steel ltd. (colorbond steel) or equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd. ) /Sshivshakti Fibre Udyog (Roofitt) Jindal.
S&F anodised aluminium snap grid frame work for false ceiling including GI wire fixed to struss all as specified. Make:- Jindal / Hindalco / Ajit India / Indal / Armstrong./ Indalco.
S&F 4mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber/GI/Aluminium frame work with screws, etc complete. Make:- Everest / Lafarge / Armstrong / M/S Visaka Industries Ltd
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm conforming to IS and fixed with stainless steel wire staples etc. Make:- Reputed make conforming to IS, as approved by the GE.
M/L Solid PVC door Frames, size 50mm x 47 mm, made out of 5 mm wood grain, printed PVC sheet, reinforced with MS tube, etc complete.
S&F factory made solid PVC moulded door shutter with wood free EPS ,28 to 30mm thick (stiles), with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on front face & 2mm plain colour PVC sheet on back face, etc complete.. Make for item Nos. 51 & 52:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline.
S&F Steel ventilator, Conforming to IS, with top hang shutter both glazed and gauged (inside gauged and outside glazed) including hinges and steel peg stay, etc complete.complete. Make:- B A Enterprises / Multiwyn Industrial Corporation Doorwyn Industries / Modern Fabricator / Madhu Industries / Ajanta Ispat / ) Alusys
M&L glazed ceramic coloured wall tiles 450 x 350 x 4-7 mm/ 350 x 250 x 4-7mm thick, set and jointed with neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in CM 1:4 on vertical surface all complete as directed. Make:- Kajaria Ceramic Ltd.(ii) Asian Granito India Ltd.(iii) Nitco(iv) Somany Ceramics Limited(v) Varmora Granito Pvt Ltd.(vi) H&R Johnson India / Orient Bell Ltd
Rotational moulded polythene water storage tanks (cylindrica, Trippled layered, vertical with closed top) hoisted and fixed in position all as specified of capacity 500tr, etc complete. Make:- Sintex / Polycon / Oriplast / Jindal .
S&F wash down water closet (Pedestal pattern and trap) including trap, connection to drain (or out going pipe) and to flishing pipe, antisyphonage pipe etc, complete. Make:- Jaquar & Company Pvt Ltd. / Prayag / Kohler / / Roca / Cera (1st quality) / Hind ware (Italian Collection) / Parry ware (Super Fine) / Jhonson Pedder.
S&F only 10 ltr PVC valveless, syphonic action type , flushing cistern, low level, whte, with inlet, ball valve, float and handle including brackets, 32 mm dia waste pipe, etc complete..( Fixing included in fixing of Pedastal pan). Make:- Cera / Hindware / Parryware / Commander / Prayag.
S&F Vitreous China wash basin, white, flat back, size 550 x 400 excluding taps, inccluding, brackets, CP brass waste coupling, 32 mm dia, brass CP, waste Pipe PVC of required length and size,, chain and plug and porcelain stopper etc complete
S & F Vitreous China Urinal, bowl type of size 465 x 355 x 265 mm white ( back or corner wall typefull stall type complete including providing and fixing plugs, bedding urinal aginst wall in cement morter 1:2 securing urinal to plug with and including 60 mm long bras scres, pointing around urinal back in cement, waste Pipe PVC 32 mm dia of required length, waste coupling, 32 mm dia, brass CP and fixing of grating and union for discharge pipe, etc complete. Make for item Nos. 58 & 59:- Jaquar & Company Pvt Ltd. / Prayag / Kohler / Roca / Cera (1st quality) / Hind ware (Italian Collection) / Parry ware (Super Fine) / Jhonson Pedder. .
S&F PVC connection 15mm size with PTMT nuts of elngh 450mm. Make :- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd/ Swastik.
S&F Pillar taps cast copper alloy fancy type with capstan needs chromium plated screwed down high pressure long screwed shanks and fly nuts, screwed for iron pipe and fixed, bore dia of pipe 15mm.
S&F bib taps cast copper alloy with crutch, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, bore dia of pipe 15mm.
S&F stop value cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screw down high pressure with crutch or butterfly handle screwed both ends for iron pipes and fixed, bore dia of pipe 15mm Make for item no 61 to 63:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises.
S&F 110mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S&F 110mm bore PVC (SWR) Pipes single socketed,in any length with rubber ring joints, laid in trenches or in floors.
S&F 110mm bore PVC (SWR) bend any radius
S&F 110mm bore PVC(SWR) junction single, (Single T), equal or unequal
S&F 110mm PVC (SWR) EC Connector with lip ring
PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement. Make for item Nos.64 to 69:- supreme / Prince / Finoolex / Reliance / Prayag.
S&F 20mm GI water tubes, medium grade, galvanised with all fittings ; and fixed complete to walls and ceilings or laid in floors, including testing, etc complete..
S&F 15mm GI water tubes medium grade, galvanised with all fittings ; and fixed complete to walls and ceilings or laid in floors, including esting, etc complete. Make for item Nos. 70 & 71:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.
M&L for Reinforced cement concrete M-25 design mix (20mm graded aggregate) in slab supported on wall, beam and column in floor, roof, landing complete all as specified and directed.
S&F 150mm dia stainless steel grating, etc complete. Make:- Prayag / Jaguar / Essco / Blue star silver line.
S&F 25mm ball valve high pressure of PTMT with epoxy coated aluminium tod & high b=density plastic ball screwed for iron pipe and fixed.( 25 mm- 455 gms,), etc complete. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Swastik.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long complete all as specified and as directed. Make:- L&T / HMT / Any reputed make, conforming to IS, as approved by the GE.
M&L for Polythene film, black, 50micron, conforming to IS, laid in floors complete all as specified and as directed.
Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area With material and labour.
Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) With material and labour.
Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface With material and labour
Treating the soil under plinth protection at the rate 5 litres of emulsion per square metre of surface area With material and labour. Make for item Nos. 78 to 81:- Chlorpyriphos 20% EC M/s Dadson Associates / M/s ABJ Pest Control, Room No.14, Kancharapara , WB or Equivalent as per HQ E-In-C's Make.
PATH Excavation over area n exc 1.5 m deep & getting out soft/ loose soil.
M&L for 100 mm PCC(1:3:6) type B2 using 40 mm graded aggregate used as in sub base floor/ pavings, finished fair and even, etc complete..
M/l sand filling under floors and the like, including watering and consolidating, etc complete.
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigments. Make:- Anjali Tiles / Ultra Tiles Pvt Ltd. / Terra Firma / Ecco Scope \ Mehtab Tiles / Nitco
M&L for precast reinforced cement concrete (1:2:4) type B1, (using 20mm graded crushed stone aggregate) of solid block kerb stone as directed incls chemfered, weathering, throating etcset in cement mortar (1:6) and used and waste of formwork, etc complete,all as specified and as directed.
M&L for two coats of synthetic paint, first quality, over a coat of primer, on new concrete surface of any description over 10cm in width and girth, not otherwise described including preparation of surfaces complete all as specified and directed. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) / enson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd
M&L for PCC (1:2:4) Type B0 ( using 12.50 mm graded aggregate ) used as in copings, including use and waste of formwork, etc complete.
Removing of excavated soil, material exc 250mtr but n exc 500 m and depositing where directed at a level n exc 1.5 m above the starting point.
SEWAGE DISPOSAL M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radious and built in cm 1:4 all as specified and directed.
M&L Cement Concrete 1:2:4 type B2 (using 40mm graded stone agg) as in as in surface channels,benching, weathering slightly rounded or chemfered angles and throating as directed
15 mm thick rendering on fair faces of brick work in cm 1:4 finished even and smooth without using extra cement including mixing of WPC in the proporation as mentioned in manufactures instruction complete all as specified (WPC to be measured and paid seperatly)
Extra for forming fair finished drain or drain channel 30 cm inner grith in cement concret using extra cement including forms moulds mitred stoped end etc completed all as specified and directed.
Supply only liquid water proofing compound @ 0.200Ltr per 50 Kg of cement or as per manufacture instruction completed all as specified nand directed. Make:- Sika /Pidilite / CICO No 1 / ACCRO No 1 /FOSROC
M&L precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed
M&L Plain cement conc 1:3:6, type c-2 using 40 mm graded aggregate for packing under, and haunching against the sides of pipes after they are laid and tested100 mm bore NP-2 pipe..
M&L Plain cement conc 1:3:6, type c-2 using 40 mm graded aggregate for packing under, and haunching against the sides of pipes after they are laid and tested 200 mm bore NP-2 pipe.
M&L Reinforced concrete pipes class NP2 , laid and jointed complete with collars 100 mm bore. Make:- Indian Hume Pipe / Any reputed make, conforming to IS, as approved By the GE.
All as per item No. 98 above, but 200 mm dia.
Construction of septic tank for 20 users, all as specified and shown on drawing.
Construction of Soakage well, for 20 users, all as specified and shown on drawing.
S&F powder coated (Min 50 micron powder coating of approved colour) aluminium frame for door, aluminium door shutter with frame partly panelled wth 9mm thick both side decorative prelaminated particle board interior grade and 5.0mm thick plain glass in Square exe. 0.50 Sqm each including rubber bead, joining cleat for fixing, aluminium door handle 150mm size-2 Nos, aluminium tower bolt 200mm size-01 No, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet fdn box main body with SS cover, governing brass pivot, mortice lock. Vertical type of mild steel 4 lever of size 100mm, etc all as mentioned below and directed:- (a) Aluminium door frame 101.60 x 44.75 x 2.40mm (Section No 14021) (b) Aluminium door shutter frame, vertical member - 85 x 44.75 x 2mm (Section No 19560) (c) Top rail of shutter - 83.50 x 44.45 x 2mm (Section No 19581) (d) Lock rail (Middle member) of shutter –150 x 44.45 x 3.00mm (Section No 19596) (e) Bottom rail of shutter - 150 x 44.45 x 3.10mm (Section No 19584) (f) Glazing clip - 0.80mm thick (Section No 19370) (Note:- Section Nos given above are of Jindal make similar equiv. section of other make may be used as approved by Deptt.
S&F powder coated (Min 50 micron powder coating of approved colour) three track sliding windows frame top & Sides of size 92 x 31.75 x 1.50mm (Section No 20832), bottom of size 92 x 31.75 x1.50mm (Section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (Section No 20736), side (handle) of shutter of size 40 x 18 x 1.55mm (Section No 20738) abd lock side of shutter of size 40 x18 x 1.45mm (Section No 20737) with locking arrangement including SS wire mesh 0.36mm nominal dia of wire with 1.40mm aperture and fixed with SS wire stables and providing with 5.0mm thick plain glass with necessary rubber beading gasket, etc al complete all as specified and directed. (Note:- Section Nos given above are of Jindal make similar equiv section of other make may be used as approved by Deptt.) Make for item Nos. 102 & 103:- Jindal / Hindalco / Indalco.
S&F gun-metal, globe or gate valve with iron wheel head, Screwed both ends for iron pipe and fixed, bore dia of pipe 20mm. Make :- Zoloto / Leader / Upadhyay / Kirloskar.
S&F Aluminium anodised guard bar for sliding aluminium window with suitable meshing fixed with aluminium bead and screws provided externally all complete all as Specified and directed. Make:- Jindal / Hindalco / Indalco.
S&F Harrison rails 20mm dia mild steel chromium plated with fixing brackets, stops rollers etc Make:- Unique Décor Marvel / Vista /Lavolor / Mac Décor
INTERNAL ELECTRIFICATION M & L for Point wiring in concealed conduit with 1.5 Sqmm FRLS,PVC insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn through PVC conduit through walls (CONCEALED) for fixing of switches/sockets etc including 1.5 Sqmm, FRLS PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to common earth dolly complete all as specified and directed, for one light point controlled by one switch, etc complete. Make for cable:- Polycab / Havells India Ltd./ RR Kabel Ltd./ Finolex / Nicco / KEI / Gold Medal Electricals Pvt Ltd.. Make for conduit:- Presto Plast / ) Finolex /) Indo American Electricals Ltd./ Kalinga Gold / Richa Cable Pvt Ltd :- Plaza / Precision.
All as per item No. 107 but, For one Ceiling/Exhaust Fan point controlled by one swtich
All as per item No. 107 but, For one socket point 5 Amps on the independent board.
All as per item No. 107 but, For one socket point 5 Amps on same board.
All as per item no 107, here in before but for One 6 pin multi, socket outlet, 5/15 Amps , independent, with cables 4.0 Sq mm, FRLS of size including 4.0 Sqmm, FRLS, PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to common earth dolly complete all as specified and directed :-
S&F Socket outlet 2 in 1, 5 pin, 6A,flush type Universal .
S & F Switch socket combination 2 in 1, 6 pin 5 /15 A 2 in 1 flush type Universal
S & F Switch socket combination 2 in 1, 5 pin 5 A 2 in 1 flush type Universal
S &F ceiling rose 3 pole/PVC/polycarbonate isoloted body
S &F switch piano flush type single pole, one way 6 Amps. Make for item Nos. 107 to 111:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard / Gold Medal Electricals Pvt Ltd.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, etc complete Make:- M/S Crompton Graves Consumer Electricals Ltd Cat No. CCS-103-20-30-SL-DP-NWH, or equivalent make in Havells India Ltd. / Surya Roshni Ltd./ Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / GE / Gold medal Electricals Pvt Ltd./ Panasonic.
Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL/ C&S / Standard / Gold Medal Electricals Pvt Ltd.
S & F MCB, DB, SPN,230 Volt 12 way, IP 43 with double door
S&F MCB SPN 32 Amp, 240 Volt
S&F MCB SP 6 to 32 Amp, 240 Volt. Make forz item Nos. 119 to 121:- Legrand / L&T / Siemens / ) ABB / GE / Schnieder / Indo Asian (Brand :-OPTI POWER) / ) Havells India Ltd/ Gold Medal Electricals Pvt Ltd.
Supply and fixing LED SECURITY light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, etc complete. Make :- Cat No. LSTS-36-CDL-M of make M/S Crompton Graves Consumer Electricals Ltd / or equivalent in Havells India Ltd. / Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / ) GE / M/s Simoco Telecommunications(South Asia) Ltd / Goald medal Electricals Pvt Ltd./ Panasonic.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. Make:- Crompton Greaves / Havells / Bajaj / Almonard / Orient
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make:- Crompton / Bajaj / Orient / Havells.
Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting Make:- Crompton Greaves / Havells / Bajaj / Almonard / Orient
Earthing complete with GI earth plate electronic 600 x 600x 6mm buried directly in ground vertically to a depth of not less than 2.25 m below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground level connected to GI earth lead 4 mm dia by means of nuts bolts washers etc made out of galvanized iron and GI wire connected to main switch/DB board including necessary excavation and earth work PCC (1 3 6) type C1 using 20mm graded stone aggregate earth chamber 40mm thick RCC cover type B1 (1 2 4 ) B1 using 20mm graded stone aggregate 20mm dia GI medium grade protection pipe upto main switch board etc complete all as shown in electrical plate No 3 of MES Schedule Part I.
EXTERNAL ELECTRIFICATION M&L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable for 1100 Volts grade cross Sectional area 16 Sqmm 2 Core, etc complete. ake:- Polycab / Havells India Ltd./ Gloster Cables Ltd. /KEI Industries Ltd / ASIAN Cable / ) Finolex / RR Kabel Ltd / Gold Medal electricals PVT Ltd.
M&L Sand Cushioning (dry) in Trenches for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230 mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid for).
S&F fly ash burnt brick, well burnt, laid breadth-wise along the length of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.
M&L GI 'Light Grade' pipe of 40 mm Bore (dia) ‘Light Grade’ for protection of cable under road, etc complete. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd
Labour only for Horizontal Boring by Passing Protection Pipe up to 80 mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and as directed.
EXTERNAL WATER SUPPLY Supply and lay pipe galvanized, “Medium class”, including fittings 40 mm (1.5”) dia, testing etc complete..
Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia.dia, testing etc complete.. Make for item Nos. 132 & 133:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.
S&F valve stop valve GM gate screwed complete for size 40 mm, including testing, etc complete..
S&F valve stop valve GM gate screwed complete for size 25 mm, including testing, etc complete.. Make for item Nos. 134 & 135:- Zoloto / Leader / Upadhyay / Kirloskar.
M & L Construction of brick masonry chamber of 60 cm x 60 cmx 60 cm [internal dimensions] suitable for 25mm/50mm bore sluice valve with PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation brick wall with sub class ‘B’ brick, old size built in CM 1:6 PCC [1:2:4] type B1 [using 20 mm graded stone aggregate for coping rendering in CM [1.4] 15 MM thick, including provision of MS sheet cover 3 mm thick with two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangement including necessary excavation and earth work in any type of soil complete all as specified.
Ferrul the existing main water supply pipe line 100/80 mm bore CI/DI/GI line for branch connection of the internal dia 20 mm, etc complete.
Note: In case doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.
UNIVERSAL TRADING
FRIENDS CONSTRUCTION
M/S SWAPAN KUMAR MONDAL
UNITED BUILDERS
M/S TRIVENI BUILDERS
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
ANSH CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .