PROVN OF FLOOR TILING IN 21 NAMDAR BLDG, ALUMINUM WINDOW IN BLDG NO 112, PVC LOFT TANK IN BLDG NO P-112, P-121 AND ADDN/ALTN IN SIGNAL BRANCH, HQ MG AND G AREA UNDER AGE B/R (CENTRAL) UNDER GE (W) COLABA, MUMBAI

Amount

Taking down door chowkhat with shutter area exc 1.5 Sqm and n exc 4.00 sqm each (without taking off shutters from the frame) all as specified & directed.

S&F factory made single extruded WPC (wood polymer composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed

S&F factory made 28-30 MM thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and directed

S&F butt hinges cast brass with mild hinges pin, bright polished and fixed type B-11 of size 100mm all as specified & directed.

S&F 150 mm extruded brass handles, fabricated type polished all as specified & directed.

S&F brass barrel tower bolts of extruded section 200 mm long all as specified & directed.

S&F 300mm long brass sliding door bolts with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.

M&L POP ceiling including cornice of POP fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM) respectively including aluminum angle 25x25x 1.4 mm & provn of hangers of GI wire of 2mm dia and providing painting with two coat of synthetic enamel paint over a coat of primer all as specified and directed by Engineer-in-Charge.

M&L E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40mm and fixed with aluminium wire staples all as specified and directed .

S&F 15 micron coloured powder quoted aluminium grills, make : -Deco grill, 6 mm thick including F Sections or equivalent make of Royal grill complete all as specified and directed.

S&F sheet glass 5.50 mm thick ordinary quality in square n.exc 0.5 sqm in each pane and fixed with rubber beads all as specified and directed

Taking down wall panelling and similar work, any thickness, any description, including cover fillets all as specified and directed.

S&F 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed sample as approved by GE

S&F 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work all as specified and directed sample as approved by GE

S&F plain fillets second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads, sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm all as specified and directed, sample as approved by GE

Supply and fixing decorative fillets of Ist class hard wood, secured with nails or brads; sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm all as specified and directed, sample as approved by GE

M&L in repairs Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed

Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing all as specified and directed

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign material and making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coats of exterior emulsion paint white or tinted over priming the surface with al-kali resistance priming paint all as specified and directed.

M&L french polishing on new wooden surfaces of any description, width or girth including cleaning and preparing the surfaces and applying coat of wood filler with two or more coats all as specified and directed..

M&L french polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surfaces, with two or more coats all as specified and directed..

Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles all as specified and directed

M&L double/ultra charged vitrified tiles 10 mm thick, area of each tiles not exc 0.42 sqm as in floors etc including 15mm thick screed bed or bedding layer in CM1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the shades of tiles all as specified and directed.

M&L double/ultra charged vitrified tiles 10 mm thick, area of each tiles not exc 0.42 sqm as in skirting and dados etc including 10 mm thick rendering coat in CM(1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the shades of tiles all as specified and directed.

M&L glazed ceramic tiles in vertical surface 600X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick rendering coat in CM 1:4 all as specified and directed

M&L 20-25 mm thick machine cut cudappa stone slab in horizental/vertical jabs laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing & rounding to edges of slab as in window cills/jabs including screed bedding 10mm thick in CM 1:6 all as specified and directed by Engineer-in-charge..

S&F of stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600mm including screws all as specified and directed by Engg-in-charge. Make : Prayag/ Blue Star Sanitary Industries Pvt Ltd/ Nirali/ Plasterfl Sanitary (I) Pvt Ltd

S&F 18mm thick both Side pre laminated board MDF pre-laminated board of any colour, Matt surface finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets all as specified and directed by Engr-in-charge. Make:- Tesa, Greenply and archidply

S&F medium weight, cold rolled mild steel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing all as specified and directed by Engg-in-charge. Make : Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S&F stainless steel 304 electro-polished for corrosion resistance modular thali holder/ basket having size 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity 6 kg all as specified and directed. Make : Cat Part No 5704 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S&F stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg all as specified and directed. Make : Cat Part No 5837 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S&F round stainless steel cabinet/drawers handlers dia of 27mm all as specified and directed. Make:- Godrej Kitchen fittings and Sleek by Asian Paints

S&F stainlesss steel modular perforated cutlery basket SS 3054 size size of 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed. Make Godrej kitchen appliances or equivalent.

S&F grain trolley SS 304 with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed. Make Godrej kitchen appliances.

S&F stainless steel hanging spice rack having three three shelf spaces length of 500 mm all as specified and directed. Make Godrej kitchen appliances.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each (without taking off shutters from the frame) all as specified & directed.

M&L 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, all as specified and directed. by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s ACC Products / M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE complete all as specifeid .

Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spray 3.00 Kg per sqm by paint brush over cleaned surfaces and Material and Labour for 20-30 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished even and fair Including applying two coats of oil emulsion distemper over a coat alkali resistant primer all as spd and directed by Engr-in-charge

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore complete all as specified and directed

S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore all as specified and directed

Supply & fixing UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed

Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore all as specified and directed

S&F 300 ltr capacity white loft polyethene water storage tanks hoisted and fixed in position including tank nipple 15mm dia ball valves of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball all as Specified and directed. Make : Sintax/ tuff/ Plasto sample as approved by GE

M&L framed work rolled sections sections conforming to Gde Fe-290(Gde-165-E) as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc, fastening and making good dismentaled portion in cement mortar (1:3) including two coats of oil bound distemper all as specified and directed.

M&L cutting holes in brickwall built in cement mortar for inserting angle and making good dismentaled prtion in cement concrete 1:2:4 type B-1 all as specified and directed.

S&F bib tap cast copper alloy CP fancy type with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed

S&F gun metal gate valve 15 mm dia with iron wheel head screwed both ends for iron pipe and fixed in position all as specified and directed

M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good to the disturbed surfaces of walls, floors all as specified as directed.

Taking down carefully copper/aluminium submain wiring including fixture such as plug socket box etc., and making good to the disturbed surfaces of walls, floors all as specified as directed.

Supply and laying sub main wiring in, concealed type, repair, for AC Point with two run of 4 sqmm stranded copper conductor with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including adequate size including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits for housing the wires all as specified. Note : Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable one run with PVC conduit will be measured as one unit.

Material & Labour for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box and with including moduler cover plate and frame, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / bell/ Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module. Make of Cable : Anchor / Havells / Finolex / Polycab. Note : Rate quoted is including providing the blank plate to modular plate whereever necessary.

All as per serial No.56 here-in but for One Wall fan / Exhaust fan controlled by one switch.

All as per serial No.56 here-in but for One ceiling fan controlled by one switch & regulator

All as per item No. 56 here in before but one 3 pin modular socket 6/10 amps, 2/3 pin combined, 2 module outlet on independent board.

All as per item No. 5 here in before but one 3 pin modular socket 6/10 amps, 2/3 pin combined, 2 module outlet on same board.

Ditto all as per srl item No 5 here-in-before but for one socket point 20 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed by engr-in-charge.

Supply and fix modular switch, one way 10 amps, one module all as specified & as directed

Supply and fix modular socket outlet, 2/3 pin combined, 2 module, 06 amps all as specified & as directed

Supply and fix modular switch, one way 16 Amp, one module, all as specified & as directed

Supply and fix modular socket outlet, 2/3 pin combined, 2 module, 6/16 A all as specified & as directed

Supply and fix ceiling rose, 3 terminals of 28 X 50mm, PVC/ poly carbonate, isolated body all as specified & as directed Makes for item Nos. 62 to 66 :- Legrand, Model No Myrius or equivalent model in Philips / Havells.

Supply and fix modular type fan step regulator, 120W, 2 module all as specified & as directed

Supply and fix Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings all as specified & as directed

Supply and Fix 2 LT opal glass with nickel finishing wall lamp and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make: Wipro Cat Part No - Jaquar KWB-CHR-MB48022A or equivalent model in Havells/ Philips/ Osram.

Supply and fix Modular MCB Protected socket 4 module sheet metal enclosures, conceiled type for SPN with two pin and earth plug and socket alongwith including metal boxe, cover plate and frame with one single pole MCB 25 amps all as specified and as directed. Make:- Anchor (Roma) , Hevells, Model No DBOX MCB Protected Socket or equivalent in Legrand

S&F LED Slim, compact, auminum die cast edge lit panel, 18 Watt Recess mounted square fixture with opal diffuser and with seperate electronic driver of same make along with connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement all as specified & as directed . Make : Havells,OCTANE LED PANEL SQUARE Cat Part No: LHEBHEP7IZ1W018 or equivalent model of Wipro - LD56-251-060-40-XX*/ Philips

S&F 8 watt Adjustable spot light LED New generation, energy saving, aesthetically designed, recessed mounted down light pressure die-cast aluminum heat sink & high efficiency long life COB LED mounted on MCPCB with high efficacy of 140 lm/W used for enhanced lumen output.along with connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement all as specified & as directed . Make : Havells Uneco Adjustable Spot light Cat Part No: UNECOADJDLR8WLED830S24 or equivalent model of Wipro/ Philips

Supply and fix LED Bub 0.5 watts B22 Green bulb complete all as specified and directed Make : Havells cat No LHLDAFUEUONX0X5 or equivalent model of wipro, Phili[ps.

Supply and fix LED Bub 0.5 watts B22 Red bulb set complete all as specified and directed Make : Havells cat No LHLDAFUEUPNX0X5 or equivalent model of wipro, Philips.

Supply and fix sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

Supply and fix MCB SPN in repair, 240 volt, 40 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

Supply and fix MCB SP in repair, 240 volt, 6 to 32 Amps, C series, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

Unitech Enterprises

SHREE JAGDISH FURNITURE CO.

vikas construction

Colaba Group Works

Nilesh Construction

BOB ENTERPRISES

M/s Qureshi Construction Co

PRABHU ASSOCIATES

Bidder Name

Unitech Enterprises

Nilesh Construction

BOB ENTERPRISES

Colaba Group Works

PRABHU ASSOCIATES

M/s Qureshi Construction Co

vikas construction

Ganesh Enterprises

SHREE JAGDISH FURNITURE CO.