PROVN OF 02 X CLASSROOM ALONGWITH ALLIED INFRA NEAR DILIP COMPLEX AND PROVN OF TOILET BLOCK BEHIND RTW AT MCMM JABALPUR UNDER AGE B/R-I OF GE (EAST) JABALPUR

Amount

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr in depth, for foundation or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10Sqm on plan and getting out in hard/dense soil complete all as specified & directed.

M&L cement concrete (1:4:8) type D-2 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concerete complete all as specified and directed.

M&L RCC M-25, Design Mix (20 mm graded stone aggregate) as in foundations including rafts, footings, plinth beams, bases for columns etc complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed

M&L RCC M-25, Design Mix (20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete completed all as specified and directed.

M&L RCC M-25, Design Mix (20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 m complete all as specified and directed.

Formwork to sofits of suspended slabs such as roof slabs,floors slabs,landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete completed all as specified and directed.

M&L RCC M-25, Design Mix (20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 12 above but 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM(1:6) finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of concrete surface in cement mortar 1:3 to receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed.

M&L rendering 15mm thick in two coats on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 using water proofing liquid finished surfaces even and smooth (without using extra cement) complete all as specified and directed. Note : WPL shall be measured and paid seperately.

M&L rendering 5mm thick in CM (1:3) as in ceiling finished even and smooth (without using extra cement) complete all as specified and directed.

Forming embankments including raising (or lowering) earth spreading in layer n .exc 30 cm thick watering, ramming/rolling and finishing to required size, shape etc n exc 1.5 mtr high from base complete all as specified and directed.

M&L broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick cement concrete, type D2, 1:4:8 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as above item No 22.00 as per item including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L coloured glazed ceramic tiles in vertical surfaces such as dado/skirting 350x 250x 7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4, quoted rates shall be included of rounding and moulding complete all as specified and directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, quoted rates shall be included of rounding and moulding complete all as specified and directed.

M&L machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L vitreous china water closet squatting pan "Orissa Pattern" ivory coloured of size 580 x 440mm, with integral foot rests and outlet for 'P' or 'S' trap, WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed.

M&L PVC valveless, syphonic action type, flushing cistern, 10 ltrs capacity low level, white with inlet, ball valve, float and handle including brackets flush pipe of polyethylane of low or high density or PVC 32mm dia for low level cistern fixed in repairs complete all as specified.

S&F long neck chromium plated brass pressmatic pillar tap of suitable size with necessary fixing arrangements incl making hole over concrete surface as approved by Engr-in-Charge complete all as specified and directed.

S&F chromium plated brass pressmatic urinal push cock with necessary fixing arrangements incl urinal spreader of suitable size as approved by Engr-in-Charge complete all as specified and directed.

S&F factory made steel windows with side hung shutters including projecting type hinges with lugs steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Ditto all as per item No 34 above but without glazing bars omplete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L sheet glass, 3mm thick, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of concrete surface in cement plaster 1:3 to receive the roof finishes with water proofing liquid complete all as specified and directed. Note : WPL Shall be measured and paid separately.

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm) laid on primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced application complete all as specified and directed. (a) Roof treatment shall be carried out as under on cleaned surfaces :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm. (ii) Laying of APP based membrane as specified thickness and weight by forced application. (iii) Applying two coats of aluminium paint @ 100ml/sqm.

M&L 75 mm thick cement concrete type C2, 1:3:6 (40mm graded aggregate) finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L 125X60 mm size of frame pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

M&L plain cement concrete Type C1, 1:3:6 (using 20 mm graded aggregate) for filling of hollow pressed steel frame complete all as specified and directed.

M&L plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster (while taking down door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed.

S&F 25 x 3mm flat iron hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed.

S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with blpck board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc (without sash bars), sizes of members of shutters as specified in SSR Part-I, section 8 , clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick particle board (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.

S&F 150mm long brass handle, cast type, polished bright and fixed complete all as specified and directed.

S&F 150 mm long brass barrel towerbolts, with barrel of extruded section and fixed complete all as specified and directed.

S&F 300 mm long brass, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

S&F 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed.

S & F Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed.

M&L aluminium powder coated ventilators partly fix and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed.

Supply only liquid water proofing liquid complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

S&F vitreous china urinal, Half stall type white, with grating and union etc complete all as specified and directed.

S&F vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified.

Supply and fix swan neck long body 15 mm bore CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F chromium plated brass urinal spreader any size and description for fixing with necessary screws and bracket complete all as specified and directed.

S&F tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted.

S&F brass chromium plated, 15 mm bore healthfaucet, (flexy type) min 1.00 mtr long complete all as specified and directed.

S&F brass chromimum plated two way bib cock fancy type, 15mm bore complete all as specifed and directed.

S&F angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifed and directed.

S&F 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

S&F brass chromium plated bottle trap for wash hand basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed.

S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed.

S&F 15mm bore medium grade galvanized tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 20 mm bore medium grade galvanized tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tank ISI mark (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 20mm bore Gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore complete all as specified and directed.

S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed.

S&F 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC vent cowl complete all as specified and directed.

S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed.

S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed.

S&F toilet paper holder fixed to walls with brass chromium plated (CP) brass screws complete all as specified and directed.

S & F PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed.

Preparing new surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats oil emulsion distemper over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed.

Painting two coats with synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including preparation of surfaces and priming complete all as specified and directed.

M&L for preparation of new or previously un treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Returning, filling in, including spreading levelling watering and well ramming in layers nexc 25cm as in soft/ loose soil complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed in soft/ loose soil complete all as specified and directed.

M&L anti-termite treatment of soil inder floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with CM 1:2 to match the floors complete all as specified and directed

M&L anti-termite treatment along the external wall below concrete for masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc in apron complete all as specified and directed

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 60 mm thick glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.

M&L for point wiring (concealed) for light point in and including rigid non-metallic PVC heavy duty conduit, 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade for fixing moudular flush type metal boxes suitable for fixing modular switches, sockets and fan regulator etc., including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point /fan/ bell/ buzzer controlled by one modular switch, 1 way 6 amps, 1 module complete all as specified and directed.

All as per item No. 102 here in before but with one 3 pin, 5 amps socket outlet on independent board.

All as per item No. 102 here in before but with 2.5 sqmm copper conductor cable for one 3 pin, 15 amps socket out let on independent board.

All as per item No. 102 here in before but one 3 pin socket outlet 15 amps, independent with cables 4 sqmm size on independent board.

M&L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS, cable with copper conductor of size 6 Sq mm in and including/drawing through rigid non metalic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed. Note :- 2x 6 Sq mm conductor cable, 1 x 6 Sq mm conductor earth continuity cable & PVC conduit shall be measured as one unit length.

S&F modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed.

S&F modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps, flush type, ISI marked complete all as specified and directed.

S&F switch modular 16 amps, flush type, ISI marked complete all as specified and directed.

S&F socket 2/3 pin combined, 6/16 amps, flush type, ISI marked complete all as specified and directed.

S&F sheet metal enclosures for SPN with two pin and earth plug and socket with one single pole MCB 20 amps complete all as specified and directed.

S&F ceiling rose surface bakelite, three terminal complete all as specified and directed.

S&F round shape 12 Watt 220 volts AC recessed type with high efficiency PMMA deffuser soft glare free light complete with drivers, holders , LED Lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrangement complete all as specified and directed. Note:- The LED batten and LED tube rod shall be of same make.

S&F LED street light fittings 35/36 W IP 65 complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 volts, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F sheet metal enclosure for DBs when MCBs to be used, 4 way, TP & N, double door type, 440 Volt with 200 amps rated busbar suitable for MCCB 63 Amps,4 pole incomer complete all as specified and directed. Note : MCBs will be measured and paid separately

S&F sheet metal enclosure for DBs when MCBs to be used, 8 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as specified and directed. Note : MCBs will be measured and paid separately.

S&F sheet metal enclosure for DBs when MCBs to be used, 4 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as specified and directed. Note : MCBs will be measured and paid separately.

S&F MCCB, four pole, 63 Amp, 415 Volt, of breaking capacity 16 KA complete all as specified and directed.

S&F MCB, SPN, 240 volts, 40 amps capacity, 'C' series complete all as specified and directed.

S&F MCB, SP, 240 volts, 6 to 32 amps capacity, 'C' series complete all as specified and directed.

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

S&F of exhaust fan, steel body AC single phase. 230 V of size 300mm sweep with, blades, and frame and louvers and including making of holes in wall, floor etc complete all as specified and directed.

S&F LED light fitting 1 x 20Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrangement complete all as specified and directed. Note:- The LED batten and LED tube rod shall be of same make.

S&F lamp holder PVC type with back plate for lamp holder fitting complete all as specified and directed.

S&F LED lamp suitable for B22 holder of capacity 10 Watt complete all as specified and directed.

S&F energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

S&F MCB, single pole & neutral, 240 volts, 32 to 63 Amps, complete all as specified and directed.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core cable complete all as specified and directed

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core cable complete all as specified and directed

Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifieds and directed.

M&L for unreinforced precaste concrete cable cover class LV, type 1,flat , size 250mm x 150mm x 40mm complete all as specified and directed.

M&L for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specified and directed.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 2 core cable complete all as specified and directed

M&L for cutting of bituminous road / floor / culvert / PCC hard standing for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed.

Supply and installed heavy duty desert cooler electric driven (single phase), having nominal air flow capacity of 4000 Cum per hour (or nearest size) complete all as specified and directed. .

Supply and lay pipe galvanized, “Heavy class”, including fittings, 20 mm (1”) dia with all fittings such as elbow, funnel, socket, reducer, pipe cutting and nipple as required at site complete all as specified and as directed.

Supply and lay pipe galvanized, “Heavy class”, including fittings, 15 mm (1/2”) dia with all fittings such as elbow, funnel, socket, reducer, pipe cutting and nipple as required at site complete all as specified and as directed.

S&F of gun metal,globe or gate valve of size 25 mm, with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of gun metal,globe or gate valve of size 15 mm, with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for construction of masonry valve pit with the following specification:- Brick work in CM (1:4) with sub class 'B' bricks, 15mm thick plastering in CM (1:4), PCC (1:4:8) type D-2 in foundation, chamber of internal size 900 x 900x900 mm,150mm thick copping on top in PCC (1:3:6), type C-1, 3mm thick MS sheet for cover, angle iron 40mmx40mmx5mm for frame all around with suitable handle with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide primer on MS work and preparation of surfaces as shown on drawing complete all as specified and directed.

M&L for cutting existing cast iron / gi pipe in position for insetion of CI specials or GI Fittings viz Teee, collar, bend or tail piece etc 80 to 200 mm bore pipe including removing of blockege, cleaning of pipe line complete all as specified and directed.

S&F of steel tubing galvanisezed medium grade with all fitting laid in trenches /Walls/ Ceiling/ Floor of size 25 mm dia complete all as specified and directed.

M&L for construction of masonry valve pit with the following specification:- Brick work in CM (1:4) with sub class 'B' bricks, 15mm thick plastering in CM (1:4), PCC (1:4:8) type D-2 in foundation, chamber of internal size 600 x 600x1200 mm,150mm thick copping on top in PCC (1:3:6), type C-1, 3mm thick MS sheet for cover, angle iron 40mmx40mmx5mm for frame all around with suitable handle with locking arrangement including two coats of synthetic enamel paint over a coat of red oxide primed on MS work and twi coats of synthetic enamal paint and preparation of surfaces as shown on drawing complete all as specified and directed.

Schedule of credit amount of Rs. Nil to be deducted during AOC.

M/S BHARTI ENTERPRISES (BID ID -3338729)

SR ASSOCIATES (BID ID -3338879)