Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹17.4 L+₹2.3 L (15.5%)Rejected-Finance 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹17.9 L+₹2.9 L (19.3%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹18.4 L+₹3.3 L (22.0%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹19.5 L+₹4.4 L (29.3%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹2 L
EMD Value
₹40,000
Closing Date
7 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jaisalmer
GE (AF) Jaisalmer
Repairs to rolling shutters, roofing sheet, hanger doors, falce ceiling etc in Tech area at AF Stn Jaisalmer
2022_MES_517511_1
8803/GE/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) Jaisalmer
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Jaisalmer
₹40,000
Yes
11 May 2022
9 Apr 2022
9 May 2022
9 Apr 2022
7 May 2022
25 Apr 2022
11 Apr 2022 - 16 Apr 2022
60 days
Amount
Taking down rolling shutter push pull or manual type and re-fixing the same in position after necessary repairs such as cleaning, replacement of rusted nuts and bolts with required / welding grinding and making good any damage to the existing shutters to opening area of shutters not exceeding 5.00 sqm each complete all as specified and directed.
Taking down rolling shutter push pull or manual type and re-fixing the same in position after necessary repairs such as cleaning, replacement of rusted nuts and bolts with required / welding grinding and making good any damage to the existing shutters to opening area of shutters exceeding 5.00 sqm but not exceeding 10 sqm each complete all as specified and directed.
Taking down rolling shutter gear operated type with bevel gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts with required / welding grinding and making good any damage to the existing shutters to opening area of shutters not exceeding 10 sqm each complete all as specified and directed.
Taking down rolling shutter gear operated type with bevel gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts with required / welding grinding and making good any damage to the existing shutters to opening area of shutters exceeding 10 sqm but not exceeding 20 sqm each complete all as specified and directed.
Taking down rolling shutter gear operated type with bevel gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts with required / welding grinding and making good any damage to the existing shutters to opening area of shutters exceeding 20 sqm but not exceeding 30 sqm each complete all as specified and directed.
Taking down rolling shutter gear operated type with bevel gear box and crank handle and re-fixing the same in position after necessary repairs such as cleaning , greasing, replacement of rusted nuts and bolts with required / welding grinding and making good any damage to the existing shutters to opening area of shutters exceeding 30 sqm each complete all as specified and directed.
Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including dismantling asbestos cement, plain or corrugated steel/fiber sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
6mm thick Asbestos cement corrugated or semi corrugated sheets as in roof coverings fixed with ‘L’ type or ‘J’ type or cranked hook bolts including dismantling asbestos cement, plain or corrugated steel/fiber sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Steel rolling shutters of 1.25mm thick laths, with out ball bearing, as specified including top cover, side guides, anchoring rod, hasp and staple and one shop coat of primer, erected with gear operated type with bevel gear box and crank handle with 1.25mm thick laths including taking down existing unserviceable rolling shutter complete all as specified and directed.
Steel rolling shutters of 1.25mm thick laths, with out ball bearing, as specified including top cover, side guides, anchoring rod, hasp and staple and one shop coat of primer, erected position as indication complete push or pull type including taking down existing unserviceable rolling shutter complete all as specified and directed.
Steel work in tubular pipes stanchions, purlins including special shaped , including special shaped washer etc. complete using or including butt welded tuber cum forming to IS 1161-1979 grade st-240 including dismantling mild steel work of any description and size as purlins, stanchions, plate etc complete all as specified and as directed.
Taking down the hanger sliding door shutter, exceeding 4.00 m but not exceeding 8.00 m height, with mechanical crane without damaging existing structure, straightening of worn-out top & bottom rails, replace the existing rollers, tightened/replaced the loose nut and bolts, necessary /required welding of rails with hangar structure, and positioning of door shutter in same opening, replacement of broken locking arrangement etc. oiling, greasing, replacement of damaged covering sheet and positioning of door shutter in same opening for smooth functioning of hangar door shutter complete all as specified and as directed.
Repair to existing hanger sliding door shutter, each exceeding 4.0m but not exceeding 8.00m height straightening of worn-out top & bottom rails, replacing unserviceable rollers, tightening/replacing the loose nut and bolts, necessary /required welding, replacement of broken locking arrangement oiling, greasing etc and positioning of door shutter in same opening for smooth functioning of hanger door shutter complete all as specified and as directed.
Repair to existing hanger sliding door shutter, each exceeding 2.00m but not exceeding 4.00m height straightening of worn-out top & bottom rails, replacing unserviceable rollers, tightening/replacing the loose nut and bolts, necessary/required welding, replacement of broken locking arrangement oiling, greasing etc and positioning of door shutter in same opening for smooth functioning of hanger door shutter complete all as specified and as directed.
Bottom wheel of hangar door/steel gate made up of mild steel conforming to IS 2062 Fe-410 of 200mm to 300mm dia and 85-100mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardening, knurling, fixing only roller bearings (qty-02 Nos) including necessary welding, drilling and other fittings fixed as in repair complete all as specified and directed.
Top wheel of hangar door/steel gate made up of taplon/cast iron of 100-200mm dia and 30mm to 60mm thick including ball bearings (qty-02 Nos), 01 Nos shaft of 25mm dia and 120mm long as per requirement at site including necessary welding, drilling and other fittings as required fixed as in repairs etc complete all as specified and directed.
Gear system suitable for Hangar doors/steel doors fixed as in repair complete all as specified and directed.
Mild Steel chain of size 20mmx20mm and 1.50 to 2.00m long fixed as in repair complete all as specified and directed.
Bottom spocket attached wheel of 200-300mm dia fixed as in repair complete all as specified and directed.
Stainless steel ball bearings roller of existing make 100mmx60mm as per site requirement fixed as in repair complete all as specified and directed.
Stainless steel ball bearings roller of existing make 60mmx 40mm as per site requirement fixed as in repair complete all as specified and directed.
Mild Steel Flat iron handle of 500mm long suitable for operating hangar door/steel doors fixed as in repair complete all as specified and directed.
Mild Steel Pipe 40mm dia pipe medium grade for rolling shutter for smooth functioning of rolling shutter fixed as in repair complete all as specified and directed.
Mild Steel Pipe 50mm dia pipe medium grade for rolling shutter for smooth functioning of rolling shutter fixed as in repair complete all as specified and directed.
Steel spring of suitable size for rolling shutter and including smooth functioning and removal of old steel spring from site fixed as in repair complete all as specified and directed.
Rolling shutters top cover fabricated to required shape and size made out of 1.00mm (20 gauge) thick mild steel sheet including necessary fixtures and fastening with one shop coat of red oxide primer of length upto 3.00 mtr fixed as in repair complete all as specified and as directed.
Rolling shutters top cover fabricated to required shape and size made out of 1.00mm (20 gauge) thick mild steel sheet including necessary fixtures and fastening with one shop coat of red oxide primer of length exceeding 3.00 mtr but not exceeding 5.00 mtr fixed as in repair complete all as specified and as directed.
Refixing of loose/ broken flat iron side clams of rolling shutter to any type of wall, pillar etc. with and including flat iron, necessary welding work with stainless steel fasteners complete all as specified and as directed.
Gear box assembly for rolling shutter including rod, required nuts, bolts, cleats, crank handle etc. complete of standard make and fixed in position including one coat of primer including removal of old gear box assembly and other accessories fixed as in repair complete all as specified and as directed.
MS Roller 75mm dia and thickness 15mm including ball bearing, bush (dia of 15mm & length 70mm) fixed in channel/guide rail fixed as in repair complete all as specified and as directed.
MS Roller 85mm dia and thickness 15mm including ball bearing, bush (dia of 12mm & length 120mm) fixed in channel/guide rail fixed as in repair complete all as specified and as directed.
MS Roller 50mm dia and thickness 15mm including ball bearing, bush (dia of 12mm & length 130mm) fixed in channel/guide rail fixed as in repair complete all as specified and as directed.
Galvanized, corrugated mild steel sheet 0.60mm thick with two corrugation side lap, fixed with coach screws and washers as in wall claddings etc. with grade of Zinc coating 120, including dismantling of old unserviceable sheet complete all as specified & as directed.
Galvanized, corrugated mild steel sheet 0.60mm thick with two corrugation side lap, fixed with L-type or J-Type or cranked hook bolt and washers as in wall claddings etc. with grade of Zinc coating 275, including dismantling of old unserviceable sheet complete all as specified & as directed.
2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw and washer in roof, wall fixed as in repair complete all as specified and directed.
Preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions and two coat of oil bound distemper including preparation of newly untreated surface, Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down/dismentling of false ceiling boards complete all as specified and directed.
Anodized aluminium snap grid size 605x605mm frame work for false ceiling as per manufacturer's instructions with 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 600mmx 600mm in size, fixed with nail to timber frame work or with staples on snap grid in ceiling, flat or sloping and including dismantling and taking down old unserviceable celing board complete all as specified and directed.
MARUDHARA CONSTRUCTION COMPANY
AMBEY MAA CONSTRUCTION COMPANY
Dadhich Engineers
Leelashah Enterprises
UMA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .