SPECIAL REPAIRS TO BLDG NO E 39 AT NAGZEERA LINES OF HQ JUNIOR LEADERS WING, THE INFANTRY SCHOOL, BELGAUM, ADDN ALTN TO RAIN WATER DRAINAGE SYSTEM NEAR BUILDING NO 3 AT HARDING LINE, HQ JL WING, THE INF SCHOOL,BELGAUM, ADDN ALTN OF CENTRAL BATH ROOM

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm for unframed work and removing rubbish off the premises and old unserviceable battens/shingles taken as credit completer. all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling cleans sawn and fixed complete all as specified and as directed .

.-Description- all as per item No 4 here in before but except timber.

Material and labour for Preparing surfaces of wood ,new or old of any description and girth and treated with two coats of creosote oil complete all as specified and as directed .

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Rolled mild Steel work in roof trusses (framed),trussed,purlins ,rafters ,struts (beams,tee,angle,channel or flat sections) including distance pieces ,cleats etc confirming to Fe-410-W(Gde-E-250)quality-A complete all as specified and as directed.

Supply and fix in repairs Mild steel frame work such as grills, gratings etc. with ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work conforming to FE 290. Gde-E-165 complete all as specified and as directed.

Supply and fix Mild Steel work as in wind ties etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for Providing cement concrete 1:3:6 type C1 ( using 20mm grade stone aggregate) in coping / bed plates ,eves filling in roof including necessary form work complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nails and taken as credit complete all as specified and as directed.

Supply and fix in repairs Aluminium composit panel board 3mm thick fixed over existing wooden/steel frames and necessory frame work with screwing and scaffolding etccomplete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.complete all as specified and as directed.

Taking down eaves gutter pipes,rain water pipes (of any size and pattern) including fittings,head shoes,bends,swan neck etc.and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter Half Square/half rounded 150mm dia complete all as specified and as directed.Make :Prince/Supreme/Finolex

Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position and removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed

Supply and fix in repair PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed Make :Prince/Supreme/Finolex

Supply and fix in repair PVC (SWR) bends any radius provided with access door 110mm bore complete all as specified and as directed . Make :Prince/Supreme/Finolex

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness and description including cover fillets and taken as credit complete all as specified and as directed . .

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST / (ii) Thickness of aluminium anodisation shall be of 15 microns (iii) Make of aluminium anodised angle :Jindal/Indal/Hindalco.

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 including Demolition of pre-cast concrete articles and precast concrete block walling of any description and taken as credit complete all as specified and as directed.

Taking down cement plaster on brick or stone walls built in cement mortar and removal of debris off the premises complete all as specified and as directed .

Material and labour for Rendering 10mm thick in cement mortar 1:6 on PCC Block masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces in two layers , 5mm top layer mixed with water proofing compound over 10mm thick rendering on external wall surfaces complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed. Make : (Apex ultima - Asian paint)

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of Oil Bound Distemper over a coat of primer and a 1mm thick wall care puty complete all as specified and as directed .Note :(i) Make of wall care putty : J K Birla/

Material and labour for Complete removal of old plastered/unplasterd surfaces of walls and brooming down and appyling two coats of exterior emulsion paint over a coat of water basedprimer complete all as specified and as directed. Make : (Apex ultima - Asian paint)

Material and labour for Complete removal of old plastered/unplasterd surfaces of walls and brooming down and applying two coats of Oil Bound Distemper over a coat of primer and a 1mm thick wall care puty complete all as specified and as directed .Note :(i) Make of wall care putty : J K Birla/

Supply only water proofing compound.Make :Impermo/Cico/Roff

Material and labour for Demolition of cement concrete in ground floors n exc 15cm thick unreinforced ,above or below ground level and removal of debris off the premises complete all as specified and as directed

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour for Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Premium quality Coloured Glazed ceramic tiles in vertical surface200 mmx 300 x 5.5 mm thick/ 450x 350x5.5 mm thick set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed .

Material and labour for Grinding and polishing of tandoor stone/Kota Stone/ Terrezo tiles of any description of required times complete all as specified and as directed .

Material and labour for Plain cement concrete type C2 1:3:6 (40 mm graded stone aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement. complete all as specified and as directed.

Taking down chowkats with shutters of area exc 1.50 sqm but n exc 4 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Taking down chowkats with shutters of area n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and as directed.

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints fixed in position complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick plywood BWR 7 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood,35mm thick glazed & skelton shutters open rebated & prepared to receive glass gauze etc edges of framing plain ,chamfered or rounded , fitted with cut & mitred beads rebated sash bars any numbers for securing gauze etc divided into squares , size of members of shutters as specified in SSR Part-I section 8 caluse 8.24(a) complete all as specified and as directed.

All as item No 42 here in before but window,ventilator etc are provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and as directed.

Material and labour for Preparing surfaces of wood or wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix MS butt hinges cold rolled medium weight of 100mm size complete all as per specified and as directed. Make : Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi guard/Gold fish

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed.

Supply and fix in repairs Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed.

Supply and fix MS butt hinges cold rolled medium weight of 75 mm size complete all as per specified and as directed. Make : Crown/Classic/Adarsh

Supply and fix in repairs Helical door spring MS 300mm long ordinary rat tail pattern spring including roller and roller plate complete all as specified and as directed. Make : Crown/Classic/Adarsh

Supply and fix100mm long extruded section Aluminium alloy anodised handles fabricated type complete all as specified and as directed. Make : Crown/Classic/Adarsh

Supply and fix in repairs 150 mm long extruded section Aluminium alloy anodised handles fabricated type complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix aluminium alloy anodised sliding door bolt 300mm long with hasp & sample (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed . Make : Crown/Classic/Adarsh

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads and removal of debris off the premises complete all as specified and as directed.

Material and labour for Preparing newly plastered surfaces ofwalls and applying three coats of white wash complete all as specified and as directed.

Material and labour for Preparing old surfaces of walls including plastered or unplastered surface and applying two coats of white wash on wall wallscomplete all as specified and as directed.

Material and labour for Plain cement concrete type B-1, 1:2:4 ( using 20mm graded stone aggregate) 25mm thick sub base of floor as in levelling course including necessary form work complete all as specified and as directed.

Material and labour for 100mm thick PCC(1:2:4) type B1,(using 40mm graded stone aggregate) finished even and smooth with using extra cement including necessary form work complete all as specified and as directed.

Material and labour for Plain cement concrete, 1:4:8, type D2, using 40mm graded stone aggregate, 50 mm thick as in sub base/levelling course including necessary form work complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tiles size 30cm x 30cmx 25mm thick, with grey cement and pigments, with glossy finish on top set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:6, etc complete all as specified and as directed.

Taking down chowkats with shutters n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Supply and fix Solid PVC door frame of size 50mmx47 mm made out of 5mm wood grain printed PVC sheet , reinforced with MS square tube in opening as per specification and drawing complete all as specified and as directed.

Supply and fix Factory made moulded solid panel PVC door shutter 30mm thick (style) as IS-4020 consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,lock rail and bottom rail on plain side and as gap insert for top and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings complete all as specified and as directed..

Supply and fix Stainless steel butt hinges medium weight 100mm size complete all as specified and as directed. Make : Crown/Classic/Adarsh

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit completeall as specified and as directed.

Taking up or down steel tubing and connections 20mm dia bore of pipe and taken as credit completeall as specified and as directed.

Supply and fix Unplasticised PVC pipes of pressure rating 10 kgf/cm2 , 15mm bore of pipe fixed to walls, ceilings or in floors etc. complete all as specified and as directed.

Description all as per item no :72 here in before but 20 mm bore of pipe

Supply and fix in repairs Wash hand basin vitreous white chinaware oval type of 550 mmx400 mm size including CI brackets ,45cm long PVC connection 15 mm size with PTMT nuts , PVC waste pipe of 32 mm dia of suitable length, Waste coupling of PTMT with necessary washers ,half or full threated ,minimum weight 45 gms,suitable for 32 mm bore discharge pipes of WHB flanged end bedded in red lead cement and other end fixed 15 mm dia CP pillar tape cast copper alloy with capstan heads ,screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe ,15mm bore of pipe PTMT angle stop cock of PTMT any colour high pressure screwed for iron pipe and fixed (MInimum weight :90 gms) and all connection.. complete all as specified and as directed.

Supply and fix PVC connection 15 mmm size with PTMT nuts of length 60 cm with brackets complete all as specified and as directed.

Supply and fix in repairs tubular towel rail 20mm dia brass chromium plated D type 60cm long between flanges complete all as specified and as directed. .

Supply and fix in repairs Stop valve fancy type brass chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed both ends for 15mm bore GI pipe or for union complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet. complete all as specified and as directed. Make :Finolex/Supreme

Supply and fix in repairs Pillar taps fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and as directed.

Supply and fix in repairs 15 mm bore Bib tap, brass chromium plated, fancy type, , screwed down high pressure with crutch or butter-fly handle , screwed for iron pipe or for brass ferrule etccomplete all as specified and as directed.Make : Metro/Waterman /ESS ESS

Material and labour for PCC , 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channel/drain/ benching inside man hole including necessary form work complete all as specified and as directed.

Extra for forming Fair finished drain or channel 30CM inner girth in cement concrete using extra cement including forms, moulds etc.,complete all as specified and as directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and as directed .

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundationn and mass concrete complete all as specified and as directed

Returning filling in excavated soil including spreading levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfacescomplete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 complete all as specified and as directed

Supply and fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

All as per item No 91 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed

Material and labour for 110mm dia PVC (SWR) pipes ,single socketed ,in any length with rubber ring joints laid in trenches inclding demolition and breaking up PCC and existing PVC drain pipes jointed in cement mortar and taking out of trenches complete all as specified and as directed.Make :Finolex/Supreme

Material and labour for PCC 1:4:8 type D-2 (40mm graded aggregate) bed to drain pipes including packing under & haunching against the side of pipe after they are laid and tested in for 110mm dia of PVC pipe complete all as specified and as directed.

Material and labour for 15 mm thick Rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls, pilasters, cornices, etc and applying .two coats of cement based paint, any colour, over a coat of alkali resistent primer complete all as specified and as directed.

Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls built in cement mortar including removal of debris off the premises complete all as specified and as directed.

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in drains, coping,bed blocks etc. including necessary form work/ moulds complete all as specified and as directed.

Supply and fix Plain galvanised mild steel sheeting with grade of zinc coating 275, 0.8mm thick, in ridges,hips, valley gutter, drip and straight flashings at expansion joints including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings and taken as credit complete all as specified and as directed .

Supply and fix Mild steel trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'A' or Fe 310-0 and flate as in wind ties completeall as specified and as directed .

Material and labour for Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cub board shelves/cabinet works complete all as specified and as directed. .Make of Particle board : Kitply/M/S Green Ply Industries ltd

Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.

.-Description - all as per item No 104 here in before but cut to suitable size in skirting/dado over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and pointed including removal of debris off the premises complete all as specified and as directed.

Material and labour for 20 mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/ wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including bedding layer of 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for Granite slab in dado or skirting 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement admixture of pigments to match the shade of granite stone including grinding and polishing and backing coat in CM 1:4, 15mm thick complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block 55 - 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 of 55-60mm thickness, with grey cement M-35 grade laid in floor/pavement etc complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including spreading ,levelling , watering and consolidation complete all as specified and as directed.

Supply and fix Aluminium frame work as in doors, partitions and windows/Ventilators using powder coated aluminium sections including provision of joining cleat ,glazing clips, hinges, handles, etc complete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately. (iv) Thickness of powder coating shall be of 50 micron (vi) Make of Aluminium frame :Jindal/Hindalco/Indal

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi guard/Gold fish

Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi guard/Gold fish

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi guard/Gold fish

Supply and fix in repairs Harrison curtain rails, mild steel chromium plated with end brackets, stops and rollers etc as approved by GE complete all as specified and as directed.

Supply and fix in repairs Brass Knob suitable of 35 to 40mm dia for curtain rod complete all as specified and as directed.

Supply and fix MS Flat iron 25x3mm thick as in hold fast and similar small article conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete & making good the disturbed area and taken as credit complete all as specified and as directed.

Taking down carefully sub main wiring of any type and size with all necessary fittings and making good the existing surface to match with the adjoining surface and taken as credit complete all as specified and as directed.

Material and labour for Point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables drawn through and including PVC casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 117 here in before but for One fan/ exhaust fan point controlled by one switch and regulator

All as described in item No. 117 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 117 here in before but for one 05 Amps 3 pin socket outlet on independent board.

All as described in item No. 117 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix in repairs Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Supply and fix in repairs Modular fan regulator electronic step type 2 module suitable for 1200/1400 mm sweep ceiling fan completeall as specified . Make -Anchor (Roma)/Rider

Supply and fix in repairs or replacement of PVC or Polycarbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/CONA

Material and labour for Provision of sub main wiring with 2 runs of single core FRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provn of one run of 6 sqmmFRLS PVC insulated unshealted multistranded copper conductor single core for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 6sqmm and one run of 6sqmm and one PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC casing/capping : Avon Plast/Presto plast /Garware

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . Make : CG cat part no : LCTLR-36-FO-CDLPor equivalent price and specification of M/S Wipro/Philips

Supply and fix in repairs round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed Make : Philips cat part no : Ultra Slim Plus 12W or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Philips cat part no : Model Number: BN 021C LED20S PSU CDL/NW GR or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Philips cat part no : BN 021 LED10S- 6500/4000 PSU GR S1 or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and as directed Make : Philips cat part no : BRP020 LEDHP/CW 240V 25W or equivalent price and specification of M/S Wipro/CG

Taking down old unserviceable MCCB DBs/MCB DB including MCB/MCCB/Isolaters and taken as credit complete all as specified and as directed

Supply and fix factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB/MCB 100/ 63 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Make - L&T / Legrand/ Siemen

Supply and fix in replacement MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified. Make :Siemen/Schneider/ABB

Supply and fix factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified & directed Make - L&T / Legrand/ Siemen

Supply and fix in repairs MCB SPN 'C' series 40 to 63Amps, 230 volts, 50 Hz, 10 KA complete all as specified and directed Make Siemen/Indo Asian/L&T

Supply and fix MCB SP 240 Volt of capacity 6 to32 Amps ‘C’ series, complete all as specified and as directed..Make: Siemen/Indoasian/L&T

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI wire 4mm dia (7.5m long) by means of GI bolts nuts washers and GI wire protected by 15mm dia light grade GI pipe (7.5m long) and watering arrangements with 20mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

SHRI.H.R.PATIL

M/s B C CHOUGULE

M/s. KIRAN M CHOUGULE

M/S MAHADEV M PATIL

ASHOK M RAJGOLKAR

RAJARAM TAYAPPA DANDAGALKAR

N K CONSTRUCTION