DAY TO DAY REPAIR/MAINTENANCE WORK IN NO 2 AND 3 AREA AT AFS PATHANKOT

Amount

Supply and fixing PVC lid for poly water storage tanks of capacity 500 litres including PVC hinges and PVC locking both complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC lid for poly water storage tanks of capacity 1000 litres including PVC hinges and PVC locking both complete all as specified and directed by Engineer-in-Charge.

Disconnection existing water tanks of capacity exc 500 Ltr and Not exc 1000 Ltr, settting aside (or lowering if required) for repairs, cleaning of tanks, etc and hoisting if required reconnecting and re fixing in the same position complete all as specified and directed by Engineer-in-Charge.

Disconnection existing water tanks of capacity exc 500 Ltr and Not exc 1000 Ltr, settting aside (or lowering if required) for repairs, cleaning of tanks, etc and hoisting if required reconnecting and re fixing in the same position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified and directed by Engineer-in-Charge.

Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge. Tank should be marked with Date and Year with enamel paint.

Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge. Tank should be marked with Date and Year with enamel paint.

Taking up or down steel tubing 15mm bore and connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 9 here-in-before, but fixing only complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 20mm bore and connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 13 here-in-before, but fixing only complete all as specified and directed by Engineer-in-Charge.

Material and labour cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Vitreous china squatting pan of patern 'Orissa pattern ' size 580x440 mm white with integral foot rests (Excluding flushing cistern and flush pipe), including long arm P-trap 100mm dia (PTMT) with PVC pipe 110mm bore length upto 700mm or as per site requirement, complete including making good to floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Vitreous china wash down water closet (pedestal pattern) white of size 540×375×415mm, including P/S trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, plastic water closet seat cover of white in colour, back closed pattern (soft close) with flat bottom and cover, mild steel chromium plated or aluminised higing device etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash hand basin white corner type of size 360×360mm including bracket fixing to wall and two nos 10mm dia 100mm long nut and bolt over bracket and CP waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Vitreous china Urinal, bowl type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair plastic water closet seat and cover including mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair to existing PVC flushing cistern by replacing flush pipe (long or short, bend pipe) complete all as specified and directed by Engineer-in-Charge.

Repair to exisiting PVC flushing cistern by replacing float valve complete all as specified and directed by Engineer-in-Charge.

Repair to exisiting PVC flushing cistern by replacing syphon and washer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC connection 15mm bore size with two SS nuts and washers and one key of suitable length complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating, upto 0.50Sqm each and bedding in cement mortar to dwarf wall or demolition of existing cemented/marble kitchen sink and making good with providing Marble strip complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement stainless steel plate rack of size 750mm X 750/900mm X 250 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm bore pillar tap fancy type cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm bore swan neck pillar tap fancy type cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 15mm bore bib taps fancy type chromium plated with crutch or butter fly handle, screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed incl CP nipple where required complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repirs wall mixture brass chromium plated suitable for fixing with GI pipes 15mm dia complete all as specified and directed by Engineer-in-Charge. Weight not less than 1200 gram.

Supply and fixing in repair cast copper alloy CP shower arm 200mm long heavy casted body with wall flange complete all as specified and directed by Engineer-in-Charge.

Supply and fixing brass chromium plated shower rose 150mm size with swivel joints fixed in repairs including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Chromium plated Jet suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs pillar tap standard of PTMT any colour high pressure screwed for iron pipe 15 mm bore minimum weight 110 gram ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs Stop valve/ Angle valve standard of PTMT any colour high pressure screwed for iron pipe 15 mm bore minimum weight 90 gram ISI Marked complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin/kitchen sink complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs CP waste coupling/waste fittings, brass, chromium plated for sink/ wash hand basin etc size 32/40mm long/ short thread complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and floor etc complete all as specified and directed by Engineer-in charge.

Supply and fixing in 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and floor etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 110mm bore PVCPVC (SWR) vent cowl complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair any dia bore PVC P/S trap as required complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-charge.

Demolition of Concrete of any description and in any position complete all as specified and directed by Engineer-in-Charge.

15mm thick plaster in cement mortar (1:4) using water proofing compound @3% by weight of cement on the floor and sides of wall of sunken portion and finished the surface even & smooth using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume complete all as specified and directed by Engineer-in-Charge.

Material and labour PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base, 75 mm thick and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with cement mortar 1:3 with and including water proofing @200ML per bag complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing grating round 100mm/75 mm size of CP with/without hole for sink/wash basin complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC(SWR) P/S trap complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone , concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square nexc. 0.5 Sqm each including hacking out old broken glass from wooden/steel frames complete all as specified and directed by Engineer-in-Charge.

Removing existing window glass pans in which oil putty and MS pines are damaged and making good by providing oil putty and MS Pins including cleaning the glass panes and fixing back in position Complete all as specified .

Supply and fixing aluminium door seal up to 1200mm long best quality complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs with screws or welding helical door spring 150mm size with roller and roller plates of mild steel including welding to angle iron plate or chowkhats as required and complete all as specified and directed by Engineer-in-Charge.

Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with bracket and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge.

Material and labour for Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth,75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any decription on brick work or concrete surfaces including raking out joints,hacking for key, scrubbing down with water etc and removing same from the sites complete all as specified and directed by Engineer-in-Charge.

Material and labour Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick cement plaster in cement mortar 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement as directed complete all as specified and directed by Engineer-in-Charge. Note :Rate for form work if reqd to be included in the rate quaoted by the contractor.

Applying 3mm thick white putty on wall surfaces and rubbing the surface even and smooth complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of plastered or unplastered old/new surfaces by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

Material and labour preparation of newly plaster surfaces of wall and projection and applying two coats of acrylic exterior emulsion paint as approved of any shade/colour in camouflage pattern over a coat of primer including preparation of surfaces as per manufacture instructions complete all as specified and directed by Engineer-in-Charge.

Material and labour Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each including taking out hold fast complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 1.0 sqm and n exc 2 sqm complete all as specified and directed by Engineer-in-Charge.

Material and labour pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer including taking down with existing one complete all as specified and directed by Engineer-in-Charge.

Material and labour pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer including taking down with existing one complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treatedfactory made shutters wood is to be incorporated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory made Steel window 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint incl. taking down existing windows complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Supply and fixing Factory made Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint incl. taking down existing ventilator complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement. NOTE:- During Fixing of Ventilator, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile etc and as per site requirement.

Preparaption of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stailess steel wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100mm long (12Gauge) butt hinges stainless steel anodised and fixed complete all as specified and directed by Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

Supply and fixing Stainless steel sliding door bolts, plate type, , with bright bolt not lesss than 10mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 300mm long complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Tower Bolt of 200 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Tower Bolt of 150 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Stainless steel Handel of 150 mm long fixed with Self Tapping screws complete all as specified and directed by Engineer-in-Charge.

Taking down of exisitg wash hand basin baracket and supply and fix new GI brackets and refixing the WHB in exisiting including making good with black/white cement as required at site complete all as specified and directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling any type floooring including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.06 sqm and n. exc. 0.11 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over and including screed bed or bedding layers of mortars 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

Material and labour non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in cement mortar 1:4 and dismantling/demolition on existing surface complete all as specified and directed by Engineer-in-Charge.

Material and labour glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and dismantling existing floor tiling complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick works built in cement mortar including all quoins pillars arches etc including PCC benching/coping etc complete all as specified and directed by Engineer-in-Charge.

Material and labour brick work with sub class ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour brick work excpet brick (obtained from ser No 101 above) with sub class ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Dismantling false ceiling any type, any thickness complete all as specified and directed by Engineer-in-Charge.

Material and labour Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips complete all as specified and directed by Engineer-in-Charge.

Vijay Kumar Contractor and Engineers (BID ID -3334447)

JAGDISH SINGH ASSOCIATES (BID ID -3334834)