Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.2 Craccepted-aoc | ₹4.2 Cr | accepted-aoc |
Tender Value
₹4.1 Cr
EMD Value
₹6.1 L
Closing Date
22 Jun 2026, 4:00 pmClosed
Cauvery Command Area Development Authority
SANNANARASAPPA
Improvements to Ayacut Roads Pendaranahalli Gangapattana Gadde bayalu road K Kallahalli Gadde bayalu road Kalluru chikkakalluru road CN Palya Hullekere road Hullekere tank road Sigehalli Madyadapalya mathikere road Sigehalli kadarayyanapalya road CS Pura gadde bayalu Road Bittagondanahalli Gollarahatti road in Turuvekere Constituency
CCADA/2026-27/RD/WORK_INDENT212
CCADA/2026-27/RD/WORK_INDENT212
Open
Roads
Two Tender Document System(Two Cover)
CCADA EE Division No 1 Tumkur
10 documents required · 10 mandatory
The Contractor should have satisfactorily completed as prime contractor for at-least one similar nature of work such as Improvements to Ayacut Road/WBM Road Works of value not less than Rs. 203.00 Lakhs (usually not less than 50% of the amount put to Tender) of the last Five Preceding Financial Years (2021-22 to 2025-26) - Work done certificate should be obtained from the officer not below the rank of Executive Engineer. Work done certificate should be in the prescribed form as in K/W-4 (Section 3: 1.3).(The cost of completed work of the previous year shall be updated to 2026-27 by giving weightage of 10% per year to bring it to the price level of financial year in which the tenders are invited).
As per Clause 3.3 (a) of K/W-4- The intending bidder/firm/company should furnish the details of required Machinery/Equipments as mention below. Details like RC,FC Lease Agreement should contain the Vehicle Name with valid R.C. etc., for Current year for the above said work to be uploaded 1.Tippers-04 Nos Own/Lease 2. Vibratory Roller-01 Nos Own/Lease. 3. Excavator/Hitachi-02 Nos Own/Lease, 4. Ajax /Concrete Mixer-01 Nos Own/Lease. 5. Water Tank Mounted with Tractor/Truck-02 Nos Own/Lease
As per Clause 3.2 (c) of K/W-4 - The Contractor should have executed in any one financial year the minimum quantities of work not less (usually 80% of the estimated quantities in any one year, (for a usually 80% of the peak annual rate of construction) in the last five preceding financial years (2021-22 to 2025-26). Quantities should be in the prescribed form as in K/W-4 (Section 3: 1.4) (1) Embankment/Shoulders-20361.00 Cum, (2) Cement Concrete-183.00 Cum, (3) WBM (G-I&GII)-7401.00 Cum, (4) Steel-3.64 Tonne
The tenderer shall scan the original and valid Registration certificate from KPWD/CPWD for this bid and upload the same
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e.2021-22 to 2025-26. Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 812.00 Lakhs, at 2026-27 Price level. Note: Annual turnover certificate by Chartered Accountant and audited balance sheets for last five years along with Income tax returns shall be uploaded. Financial turnover of previous years will be given a weightage of 10% per year to bring them to the 2026-27 price level (usually not less than two times the Amount put to tender). The tenderer shall scan the original documents for this bid and upload the same(If UDIN Number not mentioned treated as incomplete and rejected)
Liquid Assets and or availability of credit facilities of not less than For work under For work Rs 122.00 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized Banks for meeting the fund requirements etc. (Line of credit in the prescribed form) (Section 3:1.10).
The Contractor who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under (Assessed available tender capacity A X N X 1.5 -B) (1) A-Maximum value of civil engineering works executed in any one year during the last five financial years (updated to 2026-27 price level) taking into account the completed as well as works in progress. (2) N-Number of years prescribed for completion of the works for which Tenders are invited. (180/365 Days) (3) B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 180 Days period of completion of the works for which Tenders are invited Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent& Audited balance sheets mentioning UDIN number should be mandatorily uploaded along with tender, failing with which tender will be liable for rejection
NIL
NIL
NIL
NIL
NIL
NIL
NIL
NIL
₹5,000
₹6.1 L
12 Sept 2026
12 Jun 2026
23 Jun 2026
18 Jun 2026
18 Jun 2026
Improvements to Ayacut Roads Pendaranahalli Gangapattana Gadde bayalu road K Kallahalli Gadde bayalu road Kalluru chikkakalluru road CN Palya Hullekere road Hullekere tank road Sigehalli Madyadapalya mathikere road Sigehalli kadarayyanapalya road CS Pura gadde bayalu Road Bittagondanahalli Gollarahatti road in Turuvekere Constituency
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator with all lead and lift , loading & unloading charges as per the direction of Engineer-in-Charge
Construction of unlined surface drains of average cross sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction complete as per sp...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads,transporting to site, spreading, grading to required slope and compacted to meet...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications A Stone/Boul...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete.
Providing and laying 250 mm thick sand blanket below embankment including cost of all materials, machinery, labour, spreading to specified thickness and all other ancillary operations complete.
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender notification 01.docx
Others - NOTIFICATION • 0.06 MB
Line of credit.docx
Others - LOC • 0.02 MB
Short term letter.pdf
Others - LETTER • 2.78 MB
Formats.docx
Others - FORMATS • 0.05 MB
KW-4 Bid Document 212.docx
Tender Document • 3.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .