ADDN/ALTN AND SPECIAL REPAIRS TO NS 60 AND WATER TANK AT MOORA AREA AT MO(MB) GHATKOPAR UNDER GE(NW) BHANDUP

Amount

Dismantling asbestos cement (corrugated semicorrugated, etc) sheets in roof covering including ridge, north light curves etc complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/rigdes, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof, including necessary scaffolding etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of truss ,purline, rafter, vallay gutter and expended metal any description not other wise provided for complete all as specified and directed..

S&F for roof trusses (framed) trussed, Purlins, crane gantries, rails and fastenings and heavy brackets framing(Beam, Angle, Channel or flat section,plain plates) including distance pieces, cleats ,welding and braceing etc,Fe-410W(Gde-E-250)quality -B, including necessary scaffolding etc complete all as specified and directed.

S & F Mild steel Angles, bars, flats ,plane angle cleats for securing to vallay gutter supports, wall ties,securing purlins J or L hook clamps with nut bolts,washers and similar small articles confirming to Fe 290 or Gde-E165 complete all as specified and directed.

Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick walls, RCC pillars, beams, purlins etc and finishing the surface even and smooth complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces in two coats (10 + 5 mm), both coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note - WPC shall be measured and paid separately

Supply only integral water proofing compound.

Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specifed and directed. Note :- Height of the structre is more than 7 mtr and necessary scaffolding and jack will be provided at the time of work.

M&L for Reinforced Cement Concrete 1:1.5:3(Nominal mix) using 20m m graded stone aggregate as in beams, cantilever, lintels over 1.5m span complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).

Form work to side of concrete as in roof beams, lintels cantilevers, shelves etc for fair finished of surfaces complete all as specified and directed.

M& L for Mild steel TMT bars 10 mm dia., and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M& L for Mild steel TMT bars 8 mm to 10 mm dia, cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L for preparation of old decorated surfaces and applying one coat of white wash on wall, coloums, beams etc complete all as specified and directed..

M&L for preparation of new plastered surfaces on walls, chajjas,filling of hair line cracks with white cement and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying antifungal treatement as required and applying two coats of 100% acrylic emulsion paint over a coat of primer as specified and directed by Engr-in-Charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed.

M&L fpo preparation of old decorated surfaces of steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frames) and including grills/ guard bars n.exceeding 1.5 Sqm each complete all as specified and directed.

S&F aluminium section in doors/windows/ventilators ,any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed (Make : JINDAL/HINDALCO) Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet glass pane,wire mesh and rubber beading or gasket will be measured separately.

S&F 4.80mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator n exc 0.50 Sqm each pane all as specified & as directed by EIC.

S&F aluminum anodised grill DG- 202 ( 10 mm x 7.5mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and disposing off the rubbish outside MD land complete all as specified and directed.

M&L for 100 mm thick Provding PCC 1:2:4 Type B-2( 40mm graded aggregate) as flooring complete all as specified and directed.

M & L for 20mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner) complete all as specified and directed

Supply only metallic floor hardener

M & L for forming 12 mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade A for 150mm thick concrete slab. etc complete all as spd and directed.

M & L for forming construction joint 30mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

M&L for PCC 1:3:6 C-2 (using 20mm graded crushed stone aggregate) as in plinth protection, sub base of floor ( 75mm thick ) finished even and fair all as specified.

S & F Steel rolling shutter ( thickness of lath 1.25mm thick) without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, and including taking down of any thickness etc, complete gear operated type with bevel gear box and crank handle etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (including cutting of reinforcement to facilitate the demolition ) removing the debris exc 5.0 km outside MD land complete all as specified and directed.

M&L for 100 mm thick Provding PCC 1:2:4 Type B-1( 20mm graded aggregate) for base for water tank above the terrace complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position of 2000 ltrs capacity complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position of 1000 ltrs capacity complete all as specified and directed.

S & F brass Ball valve high pressure with polythene float and flynut screwed for iron pipe and fixed complete 25mm dia complete all as specified and directed.

S & F brass Ball valve high pressure with polythene float and flynut screwed for iron pipe and fixed complete 40mm dia complete all as specified and directed.

S&F in repair for CP concealed stop cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F unions 25 mm brass to connect to polythene and fixed complete all as specified and directed.

S&F unions40 mm brass to connect to polythene and fixed complete all as specified and directed.

S&F repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S& F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type. Make -Jaqur,Prayag polymers Pvt Ltd or equivalent.

S&F in repair CP pillar taps 15mm bore., cast copper alloy, chromium plated fancy type complete all as specified and directed.

S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 40mm complete all as specified and directed.

S&F 15mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

S&F 20mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

S&F 25mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

S&F 40mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25mm bore complete all as specified and directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 40mm bore complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S&F 110 mm bore PVC (SWR)junction double equal or unequal 110 mm dia with door fixed in repairs complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) single Y 75 mm dia complete all as specified & directed.

S & F 75 mm bore PVC (SWR) single Y 110 mm dia complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, complete all as specified and directed.

M & L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed.

Supply and application of 5 layer water proofing coating system on leaking concrete surface through surface preparation followed by one absorption coat of tharmacool WP 51 , nanotech modified UV resistant elastometric clear coat having min 50% solids , filling the cracks with thermacol WP 51 + cement elsatomtric crack filler and then coating with 2 coats of thermacool WP 51 +cemnet mixture + cement mixture as waterproofing coat having +450% elongation ,tensile strenght min 22 Mpa and the top coated with 2 coats thermacol 0.3C pure acrylic based UV ressitant , non yellowing, bioorganisnm resistant (anti fungal anti bacterial ) solar IR heat reflective coating confirming to BIS STD IS 17218:2019 with pull off adhesion 2.8 MPa passes 2000hrs accelerated durability test, suitable for all types of cementius surfaces white colour matt using brush roller airless spray gun as applicable . The product should have been tested at IIT NABL approved lab . The application should be done by approved appplicators only complete all as specified and directed

M & L for filling cracks with polymer based chemical (Dr fixit shrink free or equivalent ) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 72,084.00 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

M/s Qureshi Construction Co