Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹23.0 L+₹5.4 L (30.8%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot-145001
REPAIR TO JOINERY, PERIODICAL SERVICES, CLEANING OF SEWAGE LINES AND MISC B/R WORKS AT JANDWAL AT AIR FORCE STATION PATHANKOT
2022_MES_543924_3
8421/GE/PAF-28/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Pathankot
₹40,000
Yes
9 Mar 2023
14 Jan 2023
11 Feb 2023
14 Jan 2023
9 Feb 2023
21 Jan 2023
Amount
Cleaning of blocked WC seat any type/pattern (pedestal/squatt Orissa pattern) up to 1st manhole and making the drain pipe of any size full functional by flushing with water to entire satisfaction of Engineer-in-Charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n.exc 300m and burying the same in pits and top surface covered with earth complete all as specified and directed by Engineer-in-Charge.
Cleaning /clearing & Maintenance of sewage lines, manholes including CI stacks, inclunding under ground sewage lines any depth by removing any type of blockage from sewage drain upto and including 300mm dia by rodding or any other means from manholes to manholes or from trap and flushing with water after cleaning including manholes. Sludge/sludge water to be disposed off through sludge in form of semi solid/loose state will be disposed off by burring with in any distance outside the periphery of defence land including taking off manhole covers and refixing the same after cleaning. The operation shall be executed/carried out as under. NOTE:- 1. The contractor shall keep the sewage line functionally throughout the contract period. Any kind of sewage cleaning device such as sewage cleaning Mechanical Pump / Vehicle including in the rate quoted by the contractor.
Cleaning of septic tanks/soakage wells inclunding removal of sludge/waste material (dewatering) by mechanical equipments and disposed off out of MOD land complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs PVC lid for poly water storage tanks of capacity 500/1000/2000 Liters including PVC hinges and PVC locking both complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair for ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, screwed for iron pipe 20mm bore (min weight 210 gms), as in repair complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Bib cock with flange cast copper alloy chromium plated 15mm bore dia. screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15mm dia chromium plate stop cock, cast copper alloy screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Angle cock with flange 15mm bore, chromium plated cast copper alloy with crutch or butter fly handle high pressure screwed down complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair cast copper alloy chromium plated Pillar cock 15mm dia screwed down high pressure with or without lettered (Hot or Cold) with long screwed shank and fly nuts screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 32mm dia CP waste coupling complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 40mm dia CP waste coupling complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 32 mm dia bore Collapsible PVC waste pipe 800mm long suitable for Wash Hand Basin/Kitchen Sink complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15mm dia PVC connection with PTMT check nuts of length 450mm complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs brass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 32 mm dia of flush pipe for low level cistern as in repair complete all as specified and directed by Engineer-in-Charge.
Material & labour for repair to PVC Flushing cistern of 10Ltr capacity by adjusting float assembly, replacing flush handle and making functional complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 125mm Overhead Shower ABS round with 225mm stainless steel Arm & Flange ,fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Plastic water closet seat cover,white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Stainless Steel Jet Spray (Butterfly) with braided tube 1.5mtr long complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 15mm chromium plate health faucet with 1mtr stainless steel tube & hook. complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 15mm bore Concealed type Stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Brass chromium plated Wall mixer 3 in 1 (provision for over head shower & hand shower) mixing hot & cold water, including fixing to steel pipe or union 15mm bore dia pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Brass chromium plated sink mixer with regular spout mixing hot & cold water, including fixing to steel pipe or union 15mm bore dia pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Brass chromium plated centre hole basin mixer without popup base system complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 15 mm bore G I tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down GI tubing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 20 mm bore G I tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor including taking up or down GI tubing complete all as specified and directed by Engineer-in-Charge.
Material & labour for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8-10 liters capacity with intel, ball valve, float valve push button type handle including telescopic flush pipe 32 mm dia complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets including 32mm bore PVC waste pipe and chromium plate waste coupling complete and fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs vitreous china squatting pan 'Orissa pattern size 580x440mm white with 'P' or 'S' trap and integral foot rest (excluding, flushing cistern and flush pipe) squatting pan including connection 'P' trap and to flushing pipe, anti syphonage pipe and trap set in and including concrete and making good the flooring as per existing specification and taking out existing WC complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white, with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe complete including making good to floor to match with adjoining surface and taking out existing WC complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs viterous China urinal, bowl type Flat back type of size 465x355x265 complete with waste fittings including providing and fixing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs brass plunger/spindles for 15mm bore brass bib cocks/stop cocks complete all as specified and directed by Engineer-in-charge
Supply and fixing in repairs 500 Litre capacity Rotational moulded white colour polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity.
Supply and fixing in repairs 1000 Litre capacity Rotational moulded white colour polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge including dismantling existing water tank and removing from site of any capacity.
Supply and fixing in repair Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified and directed by Engineer-in-Charge.
Taking down and Refixing in same opening shutters of any description exc 1sq.m and n exc 2 sqm each complete all as specified and as directed. Note : The rate includes for taking down, easing and adjusting and also refixing builders hardwares as required including replacement of unserviceable screws etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Butt hinges, medium weight, cold rolled mild steel 100 mm (ISI Marked), fixed with steel chromium plated bright screws/welded to angle iron frame as per site requirement complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Mild steel 300mm,ordinary rat tail rod pattern springs including roller and roller plate complete to wooden/steel chowkhats by making necessary arrangements of screwing/welding etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Snake guard made of aluminium colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Sheet glass 3mm thick ordinary quality and glazing with oil putty including Hacking out old glasses from steel window / ventilator in any position and any description including punching or drilling out old glazing pins / springs clips and providing and fixing new one complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Figured glass, Pin head type 3mm thick and glazing with oil putty including Hacking out old glasses from steel window / ventilator in any position and any description including punching or drilling out old glazing pins / springs clips and providing and fixing new one complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm as in doors and windows with necessary nuts and bolts/ fillets complete all as specified and directed by Engineer-in-Charge.
Material & labour for repair to Aluminium door/windows of any size/any description, including taking down from existing opening and refixing in the same position after tightening, easing the section as required for smooth movement/operation of door/window shutter, including fitting the rubber packing, aluminium snap beading, re-setting floor/hydraulic spring (if required) etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Door closer hydraulically regulated, aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of bras, other parts made of mild steel heavy duty complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Locking system of built in Steel cupboard shutters, including taking down steel shutters (if required), replacing locking system as per existing including locking handle complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class 'B' brick straight or curved on plan built in cement mortar 1:6 including demolition of brickwork built in cement mortar complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick on the other than fair face of brick or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall etc including racking out joints, hacking for keys complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall etc including racking out joints, hacking for keys complete all as specified and directed by Engineer-in-Charge.
Rendering 5mm thick cement plaster on ceiling surface in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement plaster on brick or stone wall etc incl racking out joints, hacking for keys complete all as specified and directed by Engineer-in-Charge.
Preparation of newly platered or unplastered surfaces of wall and applying two coats of exterior emulsion paint (weather coat) over a coat of primer in any shade or colour as approved complete all as specified and directed by Engineer-in-Charge.
Preparation of newly plastered wall or concrete surfaces and applying two coats of oil bound distemeper over a coat of primer over two coats of wall putty complete all as specified and directed by Engineer-in-Charge.
Preparation of newly plastered wall or concrete surfaces and applying three coats of white wash on newley plastered surfaces of ceiling complete all as specified and directed by Engineer-in-Charge.
Preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.
Preparation of old plastered or unplastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge. Note :- Quantity of paint required according to coverage area of approved make of paint should be purchased and deposited at MES store. it will be issued on daily basis for incorporation in the subject work.
Preparation of old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed by Engineer-in-Charge.
Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.
Preparing old wooden surfaces & applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Preparing old steel surfaces & applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Preparation of old platered or unplasterd wall or concrete surfaces and applying one coat of exterior emulsion paint (wheather coat), any shade or colour as approved complete all as specified and directed by Engineer-in-Charge.
Preparation of old platered or unplasterd wall or concrete surfaces and applying one coat of exterior emulsion paint (wheather coat) in camouflage pattern , any shade or colour as approved complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1sq.m and n exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc 1.50 sqm but n exc 4 sqm each complete all as specified and directed by Engineer-in-Charge.
Material & labour for framed work as in chowkhats for doors or gates of angle or other scetion etc. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening and fixing complete conforming to Fe-410-W(Gde-E-250) quality-B, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 6mm thick sheet glass ordinary quality in square not exc 0.5 sq. m. in each pane to be fixed in uPVC windows complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 6mm thick Figured glass, pin head type n exc 0.5 sq.m. in each pane to be fixed in uPVC windows complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with uPVC windows complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for 35mm thick factory made plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified,including two coat of synthetic enamal paint over one coat of pink primer, one complete all as specified and directed by Engr-in-charge. NOTE :- All screws shall be self tapping chrome plated
Supply and fixing Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 33-35 mm thick (style) consisting of frame made out of mild steel tubes of size 19mm x 19 mm (19 gauge) for top and bottom rails and 19mm x 19 mm (19 gauge) in styles.Single Pieces plain coloured PVC sheets 5mm thick to be used to cover styles and rails.PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles & plain coloured PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottem rail.Panel will be wire gauges and tighten firmly and fitted as per manufactures instructions including stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm and Aluminum XPM in rhombus shape, in one Piece from top rail to bottom rail all as specified and directed by Eng-in-Charge. NOTE :- All screws shall be self tapping chrome plated
Supply and fix solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.
Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge.
Preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint,over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.
Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Butt hinges, medium weight, cold rolled mild steel 100 mm (ISI Marked), fixed with steel chromium plated bright screws/welded to angle iron frame as per site requirement complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor including rubber bush compete (overall length of cover plate 150mm) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Mild steel 300mm,ordinary rat tail rod pattern springs including roller and roller plate complete to wooden/steel chowkhats by making necessary arrangements of screwing/welding etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for 18 to 20mm thick prelaminated PVC solid board with acrylic lamination not less than 0.50mm thick (one side decorative choice laminate and other side balancing white) having weight not less than 9 kg/sqm as in kitchen cabinet, cupboard fixed with screws to PVC/timber/steel frame work including dismantling existing board of any type complete all as specified and directed by Engineer-in-Charge.
All as per item No 93 above but both side white board without printed complete all as specified and directed by Engineer-in-Charge.
Material & labour 0.80mm thick PVC edge binding tape around the 20mm thick PVC shutter, edge of approved colour, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 150mm size stainless steel bright finish handle (confirm to sample) fixed with nut and bolt complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Telescopic type side channel of drawer of standard size including roller for moving drawer made out of electro galvanised mild steel bright finish (soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel plain basket of size 17"x20"x6", complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel partition of size 17"x20"x6", complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel Cutlery, plate type basket of size 17"x20"x6", complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel Cup & Soucer type basket of size 17"x20"x6", complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel Plate basket type of size 17"x20"x6", complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel auto, zero crank hinges, fancy type with concealed pattern fitted to shutters complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exc 1.5 m in deep and n exc 1.5 m wide for laying of drain pipes, pipe line, fdn for manhole like n exc 10 sqm plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.
Supply and fixing UPVC underground drainage pipe (UDS) type 'B' 160mm dia with wall thickness 4mm (min) and pressured 4 KN/Mtr Sq (As per IS 15328) jointed in cement solvent complete, including Demolition of and breaking up drain pipes 150 mm internal dia (Salt glazed ware/AC/ Reinforced concrete/UPVC) set in cement mortar complete all as specified and directed by Engineer-in-Charge.
Material & labour for PCC type C2 (1:3:6) for concrete bed to drain pipes for 160 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer-in-Charge.
Returning filling in including spreading, levelling,watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed by Engineer-in-Charge.
Removal of surplus soil/mtrls to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.
Taking out steel gate exc 5.00 sqm but n. exc. 7.00 sqm each safely from RCC/brick columns and repairing the gate of any deformed shape with the help of necessary welding of iron grill, pintle hinges, fixing additional MS components cast iron etc. and refixing the same after modification in same position and location with all its necessary components complete all as specified and directed by Engineer-in-Charge. (Note :- All additional MS work will be measured and paid separately )
Supply and fixing Mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy for large gates; hook and pintle hinges: large hasp and staples; hand made sliding bolts; clamps; hold fasts; wall ties; guide plates for steel gates; and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
Material and labour for Cement concrete (1:4:8) Type D-2 using 40 mm graded crushed stone aggregates as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
Material & labour for RCC (Nominal mix) type B1 1:2:4 (20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundations beams; plinth beams, bases for columns etc complete all as specified and directed by Engineer-in-Charge.
Material & labour for RCC (Nominal mix) type B1 1:2:4 (20mm graded crushed stone aggregates) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed by Engineer-in-Charge.
Formwork to Flat fair finished surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engineer-in-Charge.
Formwork to fair finished surfaces of Square, rectangular or polygonal sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer-in-Charge.
Material & labour TMT steel bars 10mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quility conforming to relevant IS complete all as specified and directed by Engineer-in-Charge.
All as per item No 117 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge.
Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match laid over screed bed or bedding layer 15 mm thick in cement mortar 1:4 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubish of the premises complete all as specified and directed by Engineer-in-Charge.
Coloured glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including 10 mm thick screed bed or bedding layers in cement mortar 1:3 for laying tiles on vertical surfaces, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubish of the premises complete all as specified and directed by Engineer-in-Charge. (Note : Rate includes for carefully taking down fittings/fixtures such as WHB, Flushing cistern, towel rod, GI pipes etc and refixing the same after tiling work complete.)
M/S MULTI ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .