Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.0 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹14.0 L+₹93,975 (7.21%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹14.4 L+₹1.3 L (10.3%)Rejected-Finance SHIV BHAWAN GROUND FLOOR MAGADH COLONY ROAD NO 3 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 3 | Rejected-Finance NOT LOWEST |
Tender Value
₹16.1 L
EMD Value
₹32,300
Closing Date
17 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
PROVN OF CERTAIN REVENUE/MINOR WORK AT MIL STN GAYA
2022_MES_564620_2
8062/GE/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GAYA
₹32,300
Yes
6 Mar 2023
3 Jan 2023
19 Jan 2023
3 Jan 2023
17 Jan 2023
5 Jan 2023
Amount
Excavating in trenches, n exc 1.5M wide and n exc 1.5M depth; for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5M in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge
M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge
M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as spfd
M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls built in CM (1:6) all as spfd.
M & L for Machine cut kota stone slab 20-25mm thick incl 10 mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete as in riser of steps, skirting, dado and pillar laid over cement screed and jointed
M & L for vitrified ceramic tiles double charge light shed of 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete.
Supply only Butt hinges of 100 mm, medium weight, cold rolled mild steel, and fixed
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,watered and rammed to a true surface
M&L 75 mm thick cement concrete type C2 PCC 1:3:6 (40 mm graded agg) as in sub base of path/hardstanding for receiving floor finishes
M&L 40 mm thick cement concrete type B-0(1:2:4) using 12.5 mm graded stone aggregate as in spike rooling to surfaces floor complete all as specified and directed by Engr- In- Charge.
M & L for applying two coat of synthetic enamel paiint over one coat of red oxide primer incl preparation of surfaces of any description, over 10cm in width or girth,not otherwise described
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr-in-charge.
M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.
M&L a coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces complete.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work, conforming to Fe- 290-0 (Gde-E-165)
S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. (Make-Plumber/ Parryware/ Essco)
M &L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth w/o using extra cement using water proofing compound.as directed by EIC
M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth w/o using extra cement.
M&L for two coats of cement based paint over a coat of cement primer including preparation of old/newly plastered surfaces complete all as specified and directed by Engr-in-Charge
M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate sas in sub base complete all as specified and directed.
M&L 25 mm thick cement concrete type B-o(1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of floor complete.
Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4
M &L Glazed ceramic tiles in vertical surface 450X 300 (7-8mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles.all as specified and directed by EIC
M &L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but notexceeding 0.16 sqm, in floors etc. set and jointed inneat cement slurry andpointed in white or coloured cement match
M&L for preparation of surfaces and applying two coats of acrylic distemper on walls complete all as specified and as directed.
M&L for 1 mm thick of Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth.
S&F Powder coated aluminium partition, frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.
S&F 3 mm thick sheet glass tinted single reflective quality and glazing with oil putty or fixing rubber gasket with aluminium frame in each pane
S & F galvanised steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.
S & F of Pressed steel frames 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.
S&F 35 mm thick flush shutters,solid core construction with block board core & ply wood face panels, commercial type on both sides.
S&F 35 mm thick 2nd class H/W Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete as specified.
S & F Ordinary MS helical door spring 300 mm long in repair including roller and roller plate complete
M&L Aluminium anodised barrel tower bolts of extruded section 150mm long
M&L Aluminium anodised handle extruded fabricated type 150mm long
S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sec) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165)
S & F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F of Bib taps 15 mm, chromium plated and fancy type long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Make Prayag/Plumber/ESSCO/Parryware
Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified
S & F of Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA) complete all as specified
M&L DWC HDPE pipes class sn-8 laid in trenches, Drainage of 100 mm internal dia mtr of pipe and jointed complete all as specified and directed.
M & L Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
S & F sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
M &L Returning filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in soft/loose soil
S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners all as specified and directed by Engr-in-charge. (Make:- Parryware/ Hindware /Cera)
S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
M & L for 10 mm thick bedding layer with CM 1:4 for receiving tiles on walls complete
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete.
S&F 12.5mm thick gypsum board designer flase ceiling with GI frame work as under:- (a) GI sheet channel 30x25x20mm of 24 gauge placed fixed with 4mm dia GI wire @450mm centre to centre along with perimeter of wall. (b) GI sheet channel made to shape 50x40m of 24 gauge placed @ 600mm centre to centre from perimeter fo wall except long wall (in one span) (c ) GI sheet intermediate runner of size 45x10x10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame on side wall (in other span) (d) GI sheet 25mm wide x20mm gauge syspender fixed with 4mm dia GI wire@ 1200mm centre to centre including plugging in/ fixing in trusses. (e) Fixing of 12.5mm thick gypsum board including applying 1mm thich putty and two coats of plastic emulsion paint and cornices all around all as specified and directed.
S&F vertical/horizontal blinds in required shape and size all as specified and directed. Make-Vista
M & L for providing and fixing 12 mm thick toughened glass door shutter including frame,floor spring and stainless steel fancy type handles 300 mm long (04 Nos), (floor spring 02 Nos) including grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of walls with suitable arrangement.
M & L coloured Non Skid ceramic coloured tiles (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
M & L for vitrified ceramic tiles double charge light shed of 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete.
S&F in repair rotational moulded three layer polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon
S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon
S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets
M & L for virified ultra charged tiles shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1:4 complete.
S & F Century PVC boards Starke prime thickness 6 MM with decoravtive century starline laminates gloss colour Wenge brew 80675 G on front & all around the edges of thickness 0.8-1.0mm cut to length of size and shape complete including necessary frame work for wall panelling all as specified and directed by Engr-in-charge.
S&F 600mmx600mm LED ceiling lights including required wiring all as specified and directed
M/s Vikram Singh
M/S NIRBHAY KUMAR SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .