REPAIR/MAINT OF SOLAR STREET LIGHTS, SOLAR PANEL, BATTERY, LIGHTNING CONDUCTORS, EARTHINGS, STREET/SECURITY LIGHTS, FLOOD LIGHTS, GARDEN LIGHTS, BRACKETS, POLE PAINTING, LT UG CABLE AND CONNECTED WORKS AT KARU AND SHESHARTHANG UNDER GE 860 EWS

Amount

Supply and fix in replacement solar panel 70W, LED power 30W, dimentions 1320X382X55mm, veiwing angle 120 degree, all in one solar street light LED water proof outdoor lamp, including galvanized steel pole of 5 to 6 Metre height, in built battery: 36 Ah, CCT(K) 5700K white, PIR motion sensor for automatic dimming and brightness of light complete all as specified and as directed by Engineer-in-Charge. Make -Havells, Model: LHSTAKU7CBAF030 or equivalent make as approved by competent authority.

S&F in replacement 75AH, 12volt LMLA battery, suitable for long backup, including taking down old battery of any type complete all as specified and as directed by Engineer-in-Charge.

S&F in Replacement Solar light kit suitable for upto 36 Watt solar lights complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement solar Panel suitable for 36 Watt LED solar street light fitting fixed to existing pole complete all as specified and as directed by Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion and taking down old earthing complete all as specified and as directed by Eng-In-Charge.

M&L for disconnection from terminals of Battery of capacity up to 12 Volt 150AH and transporting to Battery repair shop i.e. civil market for repairing and Recharging and fixing it back to its existing location after recharging and rewpairing complete all as specified and as directed by Eng-In-Charge.

M&L for filling/ topping up of electrolite water ( Distilled water ) in Batteries ccomplete all as specified and as directed by Eng-In-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 1 x 1 x 2.25 mtrs deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to a GI strip 25 x 4 mm by means of bolts, nuts ,check nuts and washers connected to test point or as directed including filling of 100 Kgs charcoal and 100 Kgs salt in alternate layers of 150 mm each making PCC Chamber by PCC 1:3:6 type C-1 and cover of 50 mm thick duly reinforced by 6 mm bar in PCC of 1:3:6 and providing 20 mm dia light grade with funnel and wire mesh necessary 40 mm bore GI tube light grade for protection of GI earth strip 32 x 6 mm up to test point etc complete all as shown in electrical plate No 5 of MES SSR Part-I complete all as specified and as directed by Eng-In-Charge. Note : GI Strip and protection pipe upto 7.5 mtr deemed included in the rate quoted.

Supply and fix single pointed air termination aluminium rod 12mm dia 300mm long complete all as specified and as directed by Eng-In-Charge.

Supply and fix aluminium strip 25mmx3.15mm with PVC saddles and fixing screws etc. for roof conductors complete with saddle and fixing screws and down conductors above ground complete all as specified and as directed by Eng-In-Charge.

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed by Eng-In-Charge.

Excavation in trenches in hard / dense soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide and getting out including trimming of sides, for laying of cables & foundation of poles, stay assembly, complete all as specified and directed by Engr-in-Charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed by Engr-in-Charge.

Taking out old unserviceable/serviceable un-reinforced concrete PCC cable covers from excavated trench all as directed by the Engineer-in-Charge. Note:- Serviceable un-reinforced concrete PCC cable cover kept in safe custody for reuse at site and unserviceable un-reinforced concrete PCC cable cover through in low lying area.

M&L for factory made un-reinforced pre cast concrete cable protection cover LV class type - I with size 250mm x 150mm x 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 10cm after laying of cable in trenches complete all as directed and sand cover to UG cable, complete all as specified and directed by Engr-in-Charge. Note: Only punned thickness shall be measured and paid.

Taking out old LT under ground cable from trenches / floor / road / wall / pipe / pole of any size and description incl joint, complete all as specified and directed by Engr-in-Charge.

Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 10 sq mm 2 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

Laying only old reinforced PCC cable cover of any size as retrieved from serial item No. 15.00 here in before complete all as directed by Engineer-in-Charge.

S&F galvanized iron pipe of 40 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint, complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

Dismantling and taking down unserviceable / defective street light fitting / Flood light fitting of any wattage alongwith mounting bracket, flat iron clamp, nuts bolts etc from overhead LT poles complete all as directed.

S&F LED street light luminaire of 35 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED street light luminaire of 60 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED street light luminaire of 90 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED flood light luminaire of 200 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED step light 9 W with die cast aluminium housing with warm white CONE NXG - IP65 protection and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED post tops VICTORIA-IP 65, 40 W with die cast aluminium housing and polycarbonate opal diffuser and IP protection and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED post tops ENDURA SPRING-6, IP 65, 40 W with die cast aluminium housing and polycarbonate opal diffuser and IP protection and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F in replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 nos MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation old (exposed) painted surfaces of existing LT steel tubular street Light pole, struts including cross arms, clamps etc complete and applying two coats of aluminium paint over a coat of red oxide primer over the ground and making 30cm wide strip with black and yellow paint including numbering of HT/LT poles at a height of 1.5 mtr above ground level as per existing having 15mm width and 50mm bold letter complete all as specified and directed including Marking Red Stipn painting on HT Poles etc. complete all as specified and directed by Engr-in-Charge.

S&F LED flood light luminaire of 150 W 6500K Cool Day White, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED flood light luminaire of 100 Watt capacity, 6500 Lumen, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED 5 W Spike Light IP65 Warm White SPIDER 101 with die cast aluminium housing and polycarbonate opal diffuser and IP protection and incl making all electric connection, complete all as specified and directed by Engineer in charge.

S&F LED 25 W Ruby Mini Post Top LED Lamp 6000 K with die cast aluminium housing and polycarbonate opal diffuser and IP protection and incl making all electric connection, complete all as specified and directed by Engineer in charge.

Sona Enterprises (BID ID -3284938)

M/S LIBE & CO (BID ID -3285471)

M/S Behl Sons (BID ID -3284024)

M/s Aman Enterprises (BID ID -3285065)

M/S HONY CAPT RIGZIN SAMPHEL (BID ID -3284803)

M/S MOHD KARIM (BID ID -3284970)

M/S GEE AAR and SONS ENTERPRISES (BID ID -3285497)

M/S GEE GEE ENTERPRISES (BID ID -3285079)

M/S MA CONSTRUCTION Co (BID ID -3284956)

Rampal Singh Contractor (BID ID -3285309)

osho traders (BID ID -3285121)