SPL REPAIR TO BLDG NO T-13 AT TAMAM AND PROVN OF SHELTER AT BHAGATPURA UNDER GE 874 EWS.

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc. 15cm thick.(Below or above ground level) complete all as specified and directed.

M&L 75mm thick plain cement concrete 1:4;8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over and including 15 mm thick screed bed of (1:4) cement mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7-8 mm thick, area exc 0.18 sqm but n.exc 0.38 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in lining.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling

All as per item No 12 above but except plywood.

M & L for plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and directed.

M & L second class soft wood in scantling clean swan complete all as specified and directed.

All as per item No 16 above but except timber.

Dismantling of boarding of any description fitted in any position with nails complete all as specified and directed.

S&F 20mm thick 2nd class softwood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

M&L 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted in CM 1:4 complete all as specified and directed.

All as per item No 22 above but except stone.

M&L for rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Taking down chowkat with shutters exc.1.5 Sqm but n.exc 4 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed.

Taking down chowkat with shutters n. exc.1.5 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed.

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid complete all as specified and directed.

S & F glazed & skeleton shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats complete all as specified and directed.

S & F glazed & skeleton shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality in squre n.exc. 0.5Sqm in each pane complete all as specified and directed.

S & F in stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F but hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed100mm size complete all as specified and directed.

S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed.

S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint pver a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and as directed.

M&L surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out any type of soil complete all as specified and directed.

Removing excavated material exc. 250mtr But n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in including spreading levelling watering & well ramming in layers n. exc 25 cm thick complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filling complete all as specified and directed.

M&L for brick work with Sub Class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in well /septic tank /soakage well etc complete all as specified and directed.

M&L for 50mm thick wall panel made of 0.5mm thick hot dipped galvanised steel sheet on both side with 50mm thick layer of grid cfc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base panel 30x65x1.25mm thick density of foam shall be 40 kg/cum (+/- 2 kg/cum) the panel shall be precoated coated as approved by GE complete all as specified and directed.

M & L 40 mm thick for ceiling puff insulated panel made of .5 mm thick hot dipped galvanised sheet both side with 40 mm thick rigid polyurethane with tongue and groove joint for interlocking to fixed with inverted CRCA Tee section of size 50x50x5 mm thick and L section of of size 50 x50x5 mm thick to roof trusses complete all as specified and directed.

M&L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde E- 250) quality A complete all as specified and directed. Note:- Angle size shall be 65 x 65 x 6 mm

M&L for rolled mild steel for as plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections and Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for preparation of newly surfaces of steel over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for rendering 15mm thick plaster on external face of wall in CM 1:4 finished even and smooth without using extra cement.

M&L for rendering 10mm thick plaster on internal face of wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 12 mm thick Plywood, (Nos of ply 7) grade BWR type BB, fixed with screws to timber frame work complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2,100 mm thick as in sub base of floor complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 40mm thick levelling in floor complete all as specified and directed.

Supply and fix Vitrified Ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 thick screed mortar in CM 1:6 all as specified and directed

S&F anodised aluminium powder coating door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, rubber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F anodised aluminium powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminhun snap beading, screws etc. complete all as specified and directed.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L for door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F Floor door stoper Aluminium 140 mm long complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to FE-410-s or FE 410-0 complete all as specified and directed.

All as per item No-67 above but 6 to 8 mm dia bars as in stirrups/ spacers.

M&L For Plain Cement Concrete 1:2:4 (12.5)mm Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down DB's including MCB's etc all as directed complete all as specified and directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/PVC conduit 20 to 25 mm dia (ISI marked) including sunk cast iron / pressed steel terminal boxes, junction boxes, other boxes sheet of suitable sizes for mounting of switches, socketes, fan regulators, light fittings etc. covered with 3 mm thick plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 74 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 74 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 74 herein before but wiring with 2.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar for single door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series complete all as specified and directed.

S & F of MCB SPN, 240volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point including testing on completion complete all as specified and directed.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size10 Sqmm 2 core complete all as specified and directed.

S&F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S&F wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire complete all as specified and directed.

Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigerator including all accessories 20 litre capacity, 230 volts, 50 hz, Refrigerant type R134a, complete all as specified and directed.

Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes 16 sqmm 2.0 core complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed.

Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable protection of sizes 40 mm bore complete all as specified and directed.:-.Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3352758)

Concept Engineering & Constructions (BID ID -3353231)

RATHER BROTHERS (BID ID -3345418)

M/S MIR BUILDERS (BID ID -3338700)

m/s mohd saleem and co (BID ID -3353471)

M/S BEE AAY CONSTRUCTIONS (BID ID -3345451)

patriotic builders (BID ID -3345565)

rafiq trading co (BID ID -3345206)

M/S IQ ENTERPRISES (BID ID -3353905)

Bidder Name

patriotic builders

RATHER BROTHERS

M/S MIR BUILDERS

M/s Sajad Hussain Wani

M/S IQ ENTERPRISES

M/S BEE AAY CONSTRUCTIONS

Concept Engineering & Constructions

M/S MUNEER AHMAD WANI CONSTRUCTIONS

m/s mohd saleem and co

rafiq trading co