WELCOME MAINT AND CONNECTED B/R WORKS IN CERTAIN MD ACCN OF JCOs/ORs UNDER AGE B/R-II OF GE SATWARI

Amount

Notes : (1) Work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions. (2) The contractor shall have to get approve the work of srapping and preparation of surfaces (both internal and external) of the buildings as a stage from Engineer-in-Charge before carring out periodical services.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of premium emulsion distemper including making good uneven surface/holes with wall care putty where ever required.complete all as specified and directed.

M&L for preparation of old decorated plastered /concrete surfaces of walls, including complete removal of existing treatment & rubbing with dust free sand paper, mechanised scrapper and applying two coats of premium emulsion distemper over two coats of wall care putty of 1 to 2 mm thick each and one coat of primer complete all as specified and directed.

M&L for preparation of old decorated plastered /concrete surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated plastered /concrete surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered /concrete surfaces of all and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered /concrete surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion paint over one coat of wall care putty of 1 mm thick on uneven surface (as and where required) complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth not otherwise described by grinding the uneven surfaces and necessary filling of putty (as and where required) to make surface even and smooth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description,not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified & directed.

Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No -15 here-in-before but except bricks complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 05 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of brick/concrete surfaces and applying base coat of SBR based polymer @ 0.3 Kg/Sqm (Berger HS latex plus or equivalent of Asian paints) after drying and applying two coats of two componenet of glass fibre re-inforced polymer modified cementitious water proof slurry mortar (Latex Shield 2K of Berger and or eqvt make of asian paints) @ 1.5 to 1.7 Kg per coat complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over two coats of wall care putty 2 mm thick each over one coat of primer complete all as specified and directed

M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed .

M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facia ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 (using 12.5mm thick crushed stone aggregates) or with 15mm thick rendering in cement mortar 1:3 without using extra cement,surface finished even and fair (as per site requirement) complete all as specified and directed. (Note:- Quoted rated shall be deemed to include:- (i) Formwork and scaffolding required & taking down or dismantling as per site requirement (ii) The work is to be executed upto 4th storey building

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site out side defence permises complete all as specied and directed.

M&L for glazed ceramic coloured digital tiles,450x300x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured digital ceramic joint less tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for granite work 16 to 18 mm thick (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for prelaminated chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set ,jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Taking up or down 15mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed.

S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ ceiling and laid in floors complete all as specified and directed

S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall/ ceiling and laid in floors complete all as specified and directed

S&F CPVC pipes having outer dia 20mm,SDR11, including all necessary fittings, fixed to walls/ceiling with clamps or laying in floors complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rest, cast iron 'P' or 'S' trap of size 100mm, including provision of plain cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good the floors to the existing one complete all a specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) of size 520x360x390mm, white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinging and 'P' or 'S' trap device complete all as specified and directed

S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.

S&F in repair bib tap with flange, long body,chromium plated, fancy type, cast copper alloy with crutch or butterfly handle , screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair angle valve with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair vitreous china wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including cast iron brackets, brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed

S&F in repair single lever basin mixer without popup waste with 450mm long braided hose, fancy type complete all as specified and directed.

S&F in repair PVC waste pipe 32mm bore for sink /WHB of required length complete all as specified and directed.

S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement complete all as specified and directed.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends complete all as specified and directed.

S&F in repair chromium plated wall mixer 2-in-1 system with provision of overhead shower complete with 115mm long bend pipe, connecting legs & wall flange fancy type complete all as specified and directed.

S&F in repair fancy type 150mm square size brass chromium plated shower rose with 195mm long shower arms with bend 45 degree with brass flange complete all as specified and directed .

S&F in repair brass chromium plated sink cock with swinging spout (wall mounted model) with wall flanges complete all as specified and directed.

S&F in repair brass chromimium plated sink mixer swan neck with swinging spout (wall mounted model) with connecting Legs & wall flanges complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia, D type , 600 mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.

S&F in repair corner glass shelf 5.5mm thick of size 30cm with chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed .

S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 45cm x15 cm with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair gold finish stainless steel classy 6 pin cloth hanger fixed to door/wall including all necessary fittings complete all as specified and directed.

S&F in repair sinks , made of 1mm thick stainless steel,overall size of sink 610mm x 460mm with bowl size 560mm x 410mm x 200mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed

S&F in repair plate rack made of 1.0mm thick stainless steel of size 39"x30"x10" fixed with steel fastners or steel screws complete all as specified and directed

Disconnecting water tank of capacity exc 500 ltr but n.exc 1000 ltr , setting aside (or lowering if required) cleaning and removing all scale and dirt etc with wire brush from tanks and from mouths of pipes etc. and removing water to a distance 50 meters from the building, cleaning the tank & mouth of pipe with fresh water, refixing all G.I fittings and float valve, making functional all out going G.I connections from tanks & float valve and marking the date of cleaning with white paint on tanks , reconnecting and re-fixing in position complete all as specified and directed.

Dismantling water tanks of capacity n.exc 500 ltrs and removing to store complete all as specified and directed .

Dismantling water tanks of capacity exc 500 ltrs but n.exc 1000 ltrs and removing to store complete all as specified and directed .

S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including PTMT Ball valves high pressure with epoxy coated aluminum rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe including making connections complete all as specified and directed.

S&F in repair float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of bore 20mm (Min weight 210gm) complete all as specified and directed .

S&F in repair float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of bore 25mm (Min weight 455gm) complete all as specified and directed .

S&F in repair stop valve, cast copper alloy with crutch or butterfly handle , screwed down, screwed for 25 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair stop valve, cast copper alloy with crutch or butterfly handle , screwed down, screwed for 20 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site complete all as specified & directed.

Taking down shutters of any description exc 2.00 Sqm and n. exc 4.00 sqm each complete all as specified & directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work & making good the disturbed surfaces identical to the original one and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work & making good the disturbed surfaces identical to the original one and removing from site complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight (04 Nos) and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight (08 Nos) and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F pressed steel cup board frame of size 60mmx40mm, made out of mild steel sheet 1.25mm thick with rebate 20mm wide and 12mm deep including mild steel hinges, 100 mm long,medium weight and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial plywood .The size of rail and stiles as per IS: 1003(Part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood , glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers size of members of shutters as specified in SSR Part-I Section-8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

S&F in repair 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate including fixing to pressed steel frames with necessary welding work complete all as speciied and directed

S&F in repair aluminium bottom door seal with brushes,(snake guard) of length 1.2 m, suitable for wooden door,fixed with screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F aluminium anodised , fabricated type handle 150mm size complete all as spcified and directed.

M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed

S&F 100mm long stainless steel butt hinges, fixed with screws/welding complete all as specified and directed

M&L for factory made box type steel windows/ventilators, double shutter,outer frame made out ERW TUBE 'P section (60x45x25mm) ,mullion section 60x30x25mm and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung including pintle hinges with two nos MS tower bolts 150mm size on each shutter, steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required steel windows will be double shutter (external glazed and internal wire gauzed) complete all as specified in Drg No CEPZ/C-TD-34/13 of sheet No 1/2 to 2/2 complete all as specified and directed. Note: - The quoted rate shall be deemed to include :- (i) 04 Nos MS steel lugs of MS flat 20 x 5mm & 20 cm long over all welded to frames (ii) PCC block for embedding lugs.

S&F in repair aluminum powder coated (coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary glazing and locking arrangements, anodised aluminium fittings with provision of space for exhaust fan (if required) including finishing disturbed surfaces even and smooth in cement mortar 1:3 and applying two coats of oil bound distemper over two coats of wall care putty 1 to 2 mm thick each complete all as specified and directed..

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips and providing new ones complete all as specified and directed.

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed.

S&F 3 mm thick , figured glass, pin head type and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed .

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed .

Taking down chowkats with shutters of kitchen cabinets of any description n exc 1.00 Sqm each and removing from the site complete all as specified & directed.

S&F factory made 18 mm thick (+0.7mm) celuka PVC ply of density 600 kg/cbm manufactured by an ISO 900-2008 certified company. One side prelam and other side plain 18mm thick celuka PVC ply for kitchen cabinet shutter and also manufactuerer's test report and test certificate is mandatory with each and every supply of the material complete as per manufactuer's specifications and drawing and as directed .

S&F factory made solid 18mm(+0.7mm) thick celuka PVC ply of density 600Kg/cbm manufacured by an ISO 900-2008 certified company. Plain 18mm thick Celuka PVC Ply for shelf/partitions/drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per manufacturer's specifications and drawing complete all as specified and directed.

S&F PVC edge banding tape, 0.50 mm thick, 18 mm wide of approved colour, fixed with resin/hot pressed complete all as specified and as directed.

S&F in repair continuous (piano) hinges,width of flaps (when open) 30 mm, heavy duty, mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified and directed.

S&F steel fasteners of size 75 mm long, drilled and fixed to walls complete all as specified and directed.

S&F steel support of 50mm dia and 75mm length fixed with bolts at bottom of cupboard box complete all as specified and directed.

S&F stainless steel designer handle ( heavy type) 100 mm size, fixed in drawers or shutters of cupboards complete all as specified and directed.

M&L for 50 mm magnetic catcher with brass body and striking plate including letting in as fixed complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the rubbish from the work site out side defence premises complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and coloumns and the like slab lcomplete all as specified and directed..

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed .

M&L for use and waste of form work to softfits of suspended slabs such as roof slabs , floor slabs , landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

M&L for use and waste of form work to edge of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls , floor and roof and not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exc 10cm but n. exc 20 cm wide for fair finished surfaces of concrete complete all as specified & directed.

M&L for cutting holes into or through cement concrete slabs,granite, chajjas, etc. reinforced or otherwise, superficial area n exc 100 Sqcm complete all as specified and directed.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend, branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed

S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F UPVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and directed

S&F UPVC (SWR) bends with access door any radius, 110 mm bore complete all as specified and directed

S&F UPVC (SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore complete all as specified and directed

S&F UPVC (SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore complete all as specified and directed

S&F in repair UPVC (SWR) floor trap plain with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified

Providing and injecting chemical emulsion for post constructional antitermite treatment at a interval not less than 30 cm along internal wall using chloropyriophos emulsifiable concentrates at the rate of 2.25 litres per meter of the vertical surface of the sub-structure to a depth of 300mm including re-filling the hole with white cement and cleaning the disturbed surfaces complete all as specified and directed. Note:- The work is to carried out through authorised pest control company and contractor shall submit the guarantee for termite free building for 5 years .

Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making good the disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed medium grade conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications.

All as per Srl item No.128 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed

All as per Srl item No 128 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed

S&F modular switch, one way 6 Amps , 1 module complete all as specifieds and directed .

S&F modular socket 2-in-1,5 pin, 6 Amps, 2 module complete all as specifieds and directed.

S&F modular socket 2-in-1,5 pin, 6 & 16 Amps, 2 module complete all as specifieds and directed.

S&F modular switch, one way 16 Amps , 1 module complete all as specifieds and directed .

AKSHAY CONSTRUCTION COMPANY (BID ID -3374047)

M/S Shesh Paul Gupta (BID ID -3366425)