SPECIAL REPAIR TO CERTAIN ROADS PATHS AND HARD STANDING AT EASTERN COMPLEX OF MCTE UNDER GE MCTE MHOW

Amount

M&L for preparation of old black top bituminous surface by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with mechanical Air compressor to remove all loose dirt etc, and applying evenly a tack coat with paving bituminous primer using paving bitumen at the rate of 5 kg/10Sqm on black top surface and apply bituminous premix Ashphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30, mixed by using hot mix plant and laid with Mechanical paver rlled and compacted to required camber and gradient with vibratory / pneumatic/ tandom power roller 8 to 10 tonne capacity complete all as specified and directed.

Note1 : Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only) (iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account.

Dismantling of stone slabs and tiles, interlocking tiles of any description or thickness as in floors, approns, path etc complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast interlocking paver block (glossy finished) any shape and size as approved by GE conforming to IS 15658-2006, M-35 grade with grey cement and pigment dry & joints filled over and including 40 mm thick crusher dust cusions complete all as specified and directed.with fine sand complete all as specified and directed.

M&L for 100 mm thick PCC (1:3:6), type C-2, using 40mm graded crushed stone aggraegate as in sub base filling, path, paving, hardstanding etc,complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep, and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc. 1.5 m depth for foundation etc and getting in out in hard/dense soil complete all as specified and directed.

M&L for fly ash brick work, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work surfaces in cement mortar 1:4, finish the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4), type B-1, using 20mm graded crushed stone aggregates as in sub base filling, path, paving, hardstanding etc, complete all as specified and directed.

M & L for providing precast cement concrete (1:2:4) type B-0 using (12.5 mm graded stone aggregate) as in bed block/ mud stops rounded chamfered on edges etc,complete all as specified and directed.

M&L for preparation of surfaces plastered or unplastered surfaces and applying two coats of cement based paint including priming the surfaces with alkali resistant primer paint complete all as specified and directed.

M & L for moorum / Red bajri filling in floors or paving sand berms laying in layers n.exc 15 cm thick, spread, levelled, watering and rammed complete all as specified and directed.

M&L for making lines, dashes,arrows,letters etc 15 cm wide on bituminous surface with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, of thickness 2.00 mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufacturer's instruction including preparation of surfaces i.e cleaning of surface by removing all dust,dirt,oil grease etc complete all as specified and directed.

M&L for 55 mm thick PCC(1:2:4), type B-1, using 20 mm graded crushed stone aggregate as in floor pavings,hard standing etc, complete all as specified and directed.

Removing excavated material exc.250 m and n.exc 500 m depositing where directed by the Engineer in charge above the starting point.

Bharadwaj Builders

SATHI ENTERPRISES

M/s Shree Ganesh Traders