ADDITION ALTERATION TO BLDG NO P-67 MES COLONY and PROVN OF 03 Nos SPLIT AC OF CAPACITY 1.5 TON FOR CWO SECTION, HQ ANC UNDER GE HADDO,PORT BLAIR

Amount

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.

M&L coloured non skid ceramic tiles 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.

All as per item No 04 above but as in skirting / dados etc. including backing coat 10 mm thick in cement mortar 1:3, complete all as specified.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed of CM (1:4) bedding complete all as specified and directed by Engr-In-Charge

M&L glazed ceramic coloured tiles as in vertical surfaces of size 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match incl 10 mm thick backing coat in CM (1:3) as specified and directed by Engr-In-Charge

M&L 20mm thick granite stone (of any type ) work (table rubbed and polished) as in counter wash basin, cooking platform, window cill/jambs, steps, pillers, etc in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of cement and pigment to match with shade of granite incl 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and rounding ( chamfering) to exposed edge of granite slab with mirror polishing complete all as specified and as directed. (Note : Colour of granite shall be as approved by Engr-In-Charge)

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each complete all as specified and directed

Taking down Aluminium Windows chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each

Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each

S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified and directed.

S&F flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed.

S&F 35mm thick, IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc. ( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a) complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed

S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick (style)with 2,4 or 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M & L cement concrete (1:2:4) type B-1 using 20mm graded aggregate as in lintel upto 1.5m clear span, steps, bed plates, kerb, coping & kitchen slab etc including necessary formwork complete all as specified and directed.

M&L for HDF boards (fire & water proof) of 19mm thick as in CB, cabinet, shelves etc & the like with an including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surface complete all as specified and as directed.

S&F auto hinges stainless steel suitable for kitchen cabinets,CB, Shelves etc complete all as specified and directed complete all as specified and directed

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed

S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and directed complete all as specified and directed

S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long complete all as specified and directed

S&F Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed

S&F aluminium anodised barrel tower bolt all as above but 75mm long complete all as specified and directed.

S&F extruded aluminium anodised 75mm long hasp and staple, safety type incl bolt to hinge plate and fixed with screws complete all as specified.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed

S&F in repair 2nd class HW plain fillets rectangular or triangular section wrought fixed scews exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed

M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L preparing old wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of sliding doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge

Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and directed

Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F mild steel 300mm, long ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and directed

Supply only Aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.

S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Dismantling of 75mm/110mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out complete all as specified and directed by Engineerin-charge.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.

S&F for 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and directed

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius complete all as specified and directed

S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl, 75mm dia complete all as specified and directed

M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs vitreous china counter wash hand basin ovel shape of size 550x 400 mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts(Make :Prayag Cat No. PIS-14H)

S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass ferrule 15mm dia(Make :Prayag Cat No. PIS-08) complete all as specified and directed

S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make :Prayag Cat No. PIS-10 H) complete all as specified and directed

S&F in repairs stop cock cast copper alloy regular body 15 mm (male thread) fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup (Make :Prayag Cat No. PIS-26)

S&F in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.

S&F in repairs Aluminium anodised plated tubular towel rail 20 mm dia, 60 cm long between flanges including brackets all as specified

S&F liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden plastic cleats. (Minimum weight 105 gms) complete all as specified and directed

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified.

S&F in repairs for plate rack of stainless steel using 0.65 mm thick sheet of size 31X36X10 (inch) with steel sleevs & hanging arrengement for utensile, complete all as specified and directed (Make : Prayag Cat No. P-348)

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified and as directed.

S& F in repairs 25mm dia, Harrison rails, powder coated anodized aluminium alloy with fixing curtain brackets, stops, rollers etc complete all as specified and directed

S&F for providing chromium plated overhead shower rose & shower arm with or without swivel joints fixed to 15mm bore of pipe complete all as specified and directed.

S&F PTMT shelf fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified and as directed.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed

Supplying and laying of 20 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

S&F Rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.

M&L for low density polyethylene (LDPE) pipes of 40mm, pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc

Demolition of Un-reinforced cement concrete of any description and in sunken floor /roof padding etc not otherwise specifically provided for complete all as specified and directed.

M&L for PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement complete all as specified. (Note : WPC shall be measured and paid separately)

M&L 12 mm thick Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 3% by weight of cement shall be carried out as specified. (Note : WPC shall be measured and paid separately)

M&L for preparing plastered surfaces and applying primer @ 0.30/Kg per sqm and applying snadwich tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm including removal of existing water proofing treamant on sunken slabs, edges and vertical surfaces complete all as specified

M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over APP membrane surface complete all as specified and as directed.

Supply only water proofing compound.

Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.

Providing precast cement concrete solid building blocks or slabs Type B1 1:2:4 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in CM (1:4) complete, in walls complete all as specified and directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for rendering 15mm thick in CM 1:4 including with mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement on all as specified.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

M&L for 5mm thick plaster in CM (1:3) on fair faces of concrete surfaces of ceiling finished even and smooth (without using extra cement) all as specified.

Taking down of damaged, loosened cement concrete/cement mortar in RCC walls/soffits of slabs, Columns, beams etc and similar structure members up to depth of 20mm to 40mm cleaning the dismantled portion with wire brush etc remove dust , dirt and other foreign particles etc and washing with water with pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, Over prepared surfaces provide 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or Equivalent product of manufacturer all as manufacturers instruction including necessary scaffolding up to 12 m complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard) complete all as specified and directed.

M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 3mm average thick wall care putty and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. all as specified.

M&L for preparing old plastered surfaces of ceilings and applying one white wash including filling of cracks, holes etc. with cement putty all as specified.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).

M&L for PCC (1:3:6) type C-1 (20 mm graded aggregate) 75mm thick as in plinth protection with even and smooth finishing without using extra cement complete all as specified and directed.

S&F for glossy finished heavy duty chequered cement concrete tiles 20cmx20cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed.

All as per item No 101 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:4, complete all as specified.

S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engg-in-Charge

Taking down fuse Unit/DBs 415 Volt/230 Volt complete all as specified and directed by Engg-in-Charge

Taking down old aluminium sub main wiring of any size complete all as specified and directed by Engg-in-Charge.

Taking down existing light fittngs any type and any capacity complete all as specified and directed by Engg-in-Charge.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover for mounting switches / sockets / regulators, etc.complete all as specified and directed. Make of wire : Gloster/Havells/Anchor/ Polycab/Finolex and Make of PVC Casing & caping : Modi/Precision/Supreme/ Finolex/Polycab

All as per Ser item No 108.00 above but One light/fan point controlled by one switch 5 Amps one way.

All as per Ser item No 108.00 above but, point wiring for 3 pin switch socket outlet , 5 Amps on independent board.

All as per Ser item No 108.00 above but, point wiring for 3 pin switch socket outlet , 5 Amps on same board .

All as per Ser item No 108.00 above but One light/fan point controlled by 2-way switches 5 Amps

All as per Ser item No 108.00 above but,One bell point controlled by one bell push switch 5 Amps one way.

All as per item No.108.00 above but point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let and Geyser and one run of 4.0 sqmm cable for earth in green colour on independent board.

S & F Switch piano, flush type, single pole one way 5 amps all as directed. Make : Roma(Anchor)/Havells(Crabtree)/ Legrand

S & F Switch piano, flush type, single pole one way 15 amps all as directed. Make: Anchor/Cona/Legrand

S & F socket outlet 2 in 1, 3 pin 5 Amp ,flush type, universal complete all as specified and directed. Make : Roma(Anchor)/Havells(Crabtree)/ Legrand

S & F socket outlet 2 in 1, 3 pin 15 Amp ,flush type, universal complete all as specified and directed. Make : Roma(Anchor)/Havells(Crabtree)/ Legrand

S&F bell push switch, flush type, single pole, 5 Amps, 240 volts AC all as directed. Make: Anchor/Cona/Legrand.

S & F Switch piano, flush type, single pole two way 5 amps all as directed. Make: Anchor/Cona/Legrand

Supplying & fixing for ceiling rose, 3 phase, PVC ploycarbonate, isolated body complete all as directed.

S&F electric bell, ding dong type working on 230 volts AC supply complete all as specified and as directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make : Roma /Anchor/Legrand/ Simens/ Havells.

Taking down old corroded GI bracket of 25 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 25 mm dia including nuts, bolts and washers for building secufity light all as specified and directed

S& F 30 watts LED building security light fittings luminaire comprise ,pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with including necessary fixing arrangements as per site requirements all as specified and directed by Engr In charge. Make : Luker Cart Part No: LSTE-30 or equivalent to Philips /Havells

Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel painting, replacement of worn out spares and reassembling the geyser and re-fixing in its position all as directed. NOTE : Spares shall be measured and paid separately under relevant items as supply only.

Supply only heating element 1500 watt.complete all as specified and as directed.

Supply only thermostat switch complete all as specified and as directed.

Supply only pressure release valve complete all as specified and as directed.

Supply only thermal cut out complete all as specified and as directed.

Supply only indicator lamp red colour.complete all as specified and as directed.

Supply only indicator lamp green colour.complete all as specified and as directed.

S & F connecting pipe complete all as specified and as directed.

Taking down carefully ceiling fan of any make, size from its location, and re-fixing at same without any damage duly painted by two coats of synthetic enamel paint to existing colour after completion of civil work complete all as specified and directed.

Taking down carefully exhaust fan of any make, size from its location, handed over to AGE E/M store yard without any damage complete all as per specified and directed.

S & F high speed air ventilating fan 300 mm sweep single ph, 230 volt, steel body with louvers incl all fixing arrangement complete all as specified and directed Make: Havells, model No- FHVDSREPSG12 Ventil Air DS (HS) R or CG, Model No: 300 mm TRANSAIR or equivalent to Orient / Usha/ Khaitan

S & F heavy duty air ventilating fan 250 mm sweep single PVC body 1400 RPM with louvers incl all fixing arrangement complete all as specified and directed Make: CG Model No: BRISK AIR NEO or equivalent make is Orient / Usha/ Khaitan/Havells

Supplying, fixing and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT5M20 or equivalent to CG/ Philips / Havells/Luker

Supply and fixing and testing Tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT510P or equivalent to CG/ Philips / Havells/Luker

S & F Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base. Make - Havells model No LHFOAJE1TN1I060 or equivalent to Philips, LUKER.

Taking down carefully existing electronic energy meter of any capacity and any size and refixing the same location after completion of B/R work complete all as per specified and directed.

S & F of FRP meter box of size (inside) 250 x 250 x 160 mm including taking down the old/unserviceable meter boxes all as specified and directed. Make : SINTEX Cat No. GSMB-2525 or equivalent to Hensel

S & F Sub main wiring with PVC insulated FRLS cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red/Yellow/Blue, Neutral- black and earth- green in and incl rigid PVC concealed conduit of size not less than20mm dia, with all necessary fittings concealed in walls/roof/floor and provision of PVC insulated FRLS copper conductor single core 6.0 sq mm for earth continuity all as directed. Note : 3 length of cable and one length casing caping shall be measured and paid for one length Make:Gloster /Havells /Anchor /Polycab /Finolex

S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. Make : C &S/ Indo Asian /Havells/L&T

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : C&S/ Indo Asian /Havells /L&T

Supply and Fixing 4 pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed Make :C&S/ Indo Asian /Havells/L&T

Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian/Havells/L&T / C&S

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. Make : Indo Asian/Havells/L&T/C&S. Note of 142 & 143 :- All copper conductors should be connected with MCB alongwith copper reducer terminals of suitable size duly crimbled.

Supply, laying,testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 50 Sqmm 3.5 core (laid on floor/Roof/wall in proper saddling all as specified and directed. Make Polycab/ Gloster/ Anchor/ Havells/ Finolex

Supply and laying/fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 50 mm(OD) x 38mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. Make:Rex Poly Extrusion Ltd/Tirupati Plastomatics Pvt Ltd.

Excavation in trenches not exc 1.5 M deep and 1.5 M width and getting out in soft or loose soil for foundation of poles (or) cable laying all as specified and directed.

Returning, filling incl spreading, levelling, watering and well ramming layers not exc 25 M for cable laying all as specified and directed.

Removing/excavated soil to a distance not exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point all as specified and directed.

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia GI medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

Supply, install, test & commissioning of Split type air conditioner, 1.5 TR capacity, BEE 5-Star rating, having cord less remote control unit, wall mounted inverter type with built-in ioniser and plasma filter for better air quality, copper condenser, electric driven, single phase, 240 volts, 50 Hz, AC supply including transporting to site, fixing of indoor and outdoor units, with necessary wall mounting brackets, necessary copper piping for connections, cutting, bending, brazing, proper insulation on copper pipe and all other pipes, PVC drain pipe upto ground level, installation complete with all accessories including connecting electrically between indoor and outdoor units with suitable size of PVC insulated multistanded copper conductor, complete all as specified and as directed. Make: Blue star of model IA718DCU or equivalent of Hitachi/Daikin Note 1 : Extra required all connected pipes/copper cables, as per site, shall be paid separately. 2. The drain out water pipe connection should be connected up to ground level.

Supply and fix Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5 % and capacity 4 KVA complete all as specified and as directed. Make : V-Guard / Premier

M&L submain wiring with 2 runs of 4.0 sqmm mutistranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of 4.0 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth contuinity conductor Including lugs of suitable size drawn in and including rigid PVC casing & caping/ PVC conduit of suitable size but not less than 25mm width/dia complete all as directed. Make of wire : Polycab/Gloster/Anchor/Havells/Finolex and Make of PVC conduit : Modi/Precision/Supreme/Finolex/Polycab. NOTE : Two runs of 4.0 sqmm and one run of 4.0 sqmm cable alongwith PVC Casing capping/ PVC conduit will be masured as one unit

S &F the following items of Split AC complete all as specified and as directed by Engineer-in-Charge.

1/2" copper pipe

1/4" copper pipe

1/2" Insulation hose

1/4" Insulation hose

2.5 Sqmm 3 core flexible cable

1" CPVC hard drain pipe

S &F of Starter switch of capactity 25 Amps, working on 240 Volts AC Supply, suitable for Air Conditioner. Make : (Crabtree : Cat Part No. ACTO 252504/ or equalent in Anchor/Standard.

M/s K Moorthi

M/s Ramesh Lal

M/s Saina Enterprises

P Babu

RS ENGINEERING WORK

Reliance Sales Agency

ANITA VARMA ENTERPRISES