SPECIAL REPAIR FOR REPLACEMENT OF DG SET AGAINST BER PROVN OF CERTAIN SUBMERSIBLE PUMP AND CERTAIN SANCTIONED WORK UNDER GE AF TA AT AF STN AGRA

Amount

Taking down old U/S BER DG set of capacity upto 110 KVA by disconnecting the electrical connections and dismantling the DG Set from PCC platform and lifting with crane and deposited to MES E/M store yard complete and all as specified and directed.

Supply, commissioning erecting and testing complete of manufacturer or OEM manufactured, static silient (sound proof enclosure) Disel Engine driven Generating set of capacity 125KVA, water cooled, 415 volts (AC three phase, 4 wire system of supply) 50 Hz at power factor 0.8 minimum. The DG set shall consists of diesel engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and complete with control panel standardized by manufacturer, fuel tank with mounting arrangements and inlet, outlet return inlet oil arrangements, exhaust pipe, battery of adequate capacity as per OEM recommendations for self starting purpose complete and suitable for conditions prevalent at Agra (capacity of engine, alternators shall worked out taking allderating factors into consideration) including PCC foundation 1:2:4 type B1 (using 20 mm graded stone aggregate) size as per OEM recommandation anti-vibration pads complete all as specified and directed including all features to comply with latest CPCB guidelines and comprising of following components:-

(a). DIESEL ENGINE :- Diesel engine 1500RPM, direct injection, multi cylinders, four stroke, conforming to IS:100001/ISO3046/BS:649/BS:5514 amended upto date, for continous running capable of taking 10% overload for one hour in 12 hour, water cooled, naturally turbo charged, capable of giving adequate BHP to drive Alternator capable of delivery 125 KVA at outdoor atmospheric conditions at Agra ( Taking all derating factor into consideration) fitting with the following accessories subject ot the design of manufacturer:- (i) Dynamically balanced fly wheel. (ii) Air cleaner oil bath type (iii) Electronic Governor class 1 A with back up Mechanical governor class 1A Flywheel with starter ring (iv) Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level (v) Radiator cooling (vi) Radiator fan with guard (vii) Vaccum indicator (viii) Fuel filter and fuel hoses (ix) Fuel injection pump (FIP) (x) Fan and water pump assesembly (xi) Lub oil filter and pump (xii) Electric starting system with battery charging alternator and axial type started motor including adequate number of high capacity maint free lead acid battery as per manufacturer recommendation including inter connecting cables/leads with terminals complete with starting/stopping switch voltmeter, etc 01 set

(xiii) Engine safety shut down system against low oil pressure and high water pressure. (xiv) Exhaust gas driven turbo charge (xv) Oil filter (xvi) Lub oil cooler (xvii) Engine main manual with spare part list (xviii) Suitable designed acoustic enclosure as per CPCB regulations (xix) Any other item not included / specified but is a standard design of the manufacturer.

(b). Engine insttrument panel : Engine instrument panel shall comprising of the following:- (i) Starting on /off switch. (ii) water temp auge. (iii) Hour meter cum RPM indicator (iv) Lub oil pressure gauge (v) Lub oil temperature gauge (vi) Battery charging meter (vii) Safety alarm against high water temp and lub oil pressure. (viii) Any other item not included/specified but is a standard design of the manufacturer.

(c ). ALTERNATOR shall be self excited, self regulated, brush less for 125KVA continuous operation at the speed of 1500RPM at 415 volts, 50Hz three phase, 4 wire system with advance electronic voltage regulator to ensure high voltage accuracy with +1% with class H insulation and SPDP enclosure directly coupled with engine through flexible couping and conforming to IS-4722 complete-01 No. Note:- Alternator should be able to deliver output rating at actual site condition.

Bottom mounted (or as per manufacturer design) steel fuel tank fabricated out of 14 SWG MS sheet of capactiy not less than 12 hrs continuous operation inside canopy with fuel level guage, drain plug locking arrangements etc with and including GI pipe connections duly laid as per engineering practice complete all as specifided and directed.

(d). Bypass arrangement by providing separate panel made out of 3mm thick CRCA sheet, outdoor type with connecting copper bus bar of suitable size from change over and set of 3 Nos indication lamp for R, Y and B and 2 Nos 4 pole on load change over switch front handle operated of capacity 200 Amp is to be installed near AMF panel complete all as specified and directed. (i) Hour run meter.(ii) Any other item not included/ specified but is a standard design to the manufacturer.

(e). AMF CONTROL PANEL: Supply, fabricating and testing of factory made/fabricated cubical automatic main failure panel indoor type with degree of protection IP-42 conforming to IS-2147, suitable for 125KVA capacity DG Set, fabricated using 14 Gauge CRCA sheet, powder coated comprising of suitable rated copper bus bar,contactors of adequate rating for auto transfer of main/DG supply, internal wiring with control fuse, provn of connecting incoming and outgoing leads/ bus bar as approved with and including following accessories all as specified and directed :- (i) Master switch for auto/manual/reset/off-01 No. (ii) Digital type multifunctional meter for ampere, voltage, power factor, frequency etc -01 No. (iii) Push button start, stop, reset-01 No. (iv) Set of lamp for indicating load a set, low pressure, high cylinder temperature, load on mains, set fails at start, low oil presure. (v) Battery charger connected to load. (vi) Transformer of adequate rating. (vii) Ractifiers (viii) DC ampere meter and voltmeter. (ix) Fault accept / reset push button. (x) Set of relays and contactor 200 Amp suitable for 125KVA DG Set for automatic start and automatically shut down of suitable rating and capacity and 2 Nos MCCB 4 pole, 200 Amp, 25 KA, 4 pole thermal adjustable type of range 70-100% fixed on main supply and DG set supply. (xi) Make of AMF control panel shall be as per OEM recommendations.

Supply, commissioning erecting and testing complete of manufacturer or OEM manufactured, static silient (sound proof enclosure) Disel Engine driven Generating set of capacity 30KVA, water cooled, 415 volts (AC three phase, 4 wire system of supply) 50 Hz at power factor 0.8 minimum. The DG set shall consists of diesel engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and complete with control panel standardized by manufacturer,inbuilt AMF panel of suitable size including all accessories and measuring instruments as per OEM recommendations,battery of adequate capacity as per OEM recommendations for self starting, fuel tank with mounting arrangements and inlet, outlet return inlet oil arrangements, exhaust pipe complete with inbuilt AMF panel of suitable size including all accessories and measuring equipments as provided by OEM and suitable for conditions prevalent at Agra (capacity of engine, alternators shall worked out taking allderating factors into consideration) including PCC foundation size as per OEM recommendatons, anti-vibration pads complete all as specified and directed, including all feature to comply with latest CPCB guidelines and comprising of following components:-

(a). DIESEL ENGINE :- Diesel engine 1500RPM, direct injection, multi cylinders, four stroke, conforming to conforming to IS:100001/ISO3046/BS:649/BS:5514 amended upto date, for continous running capable of taking 10% overload for one hour in 12 hour, water cooled, naturally turbo charged, capable of giving adequate BHP to drive Alternator capable of delivery 30 KVA at outdoor atmospheric condition at Agra ( Taking all derating factor into consideration) fitting with the following accessories subject ot the design of manufacturer:- (i) Dynamically balanced fly wheel. (ii) Air cleaner oil bath type (iii) Mechanical governor class 1A Flywheel with starter ring (iv) Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level (v) Radiator cooling (vi) Radiator fan with guard (vii) Vaccum indicator (viii) Fuel filter and fuel hoses (ix) Fuel injection pump (FIP) (x) Fan and water pump assesembly (xi) Lub oil filter and pump (xii) Electric starting system with battery charging alternator and axial type started motor including adequate number of high capacity maint free lead acid battery as per manufacturer recommendation including inter connecting cables/leads with terminals complete with starting/stopping switch voltmeter, etc 01 set

(xiii) Engine safety shut down system against low oil pressure and high water pressure (xiv) Exhaust gas driven turbo charge (xv) Oil filter (xvi) Lub oil cooler (xvii) Engine main manual with spare part list (xviii) Suitable designed acoustic enclosure as per CPCB regulations (xix) Any other item not included / specified but is a standard design of the manufacturer.

(b). Engine insttrument panel : Engine instrument panel shall comprising of the following:- (i) Starting on /off switch. (ii) water temp auge. (iii) Hour meter cum RPM indicator (iv) Lub oil pressure gauge (v) Lub oil temperature gauge (vi) Battery of adequate capacity as per OEM recommandations with charger and charging meter. (vii) Safety alarm against high water temp and lub oil pressure. (viii) Any other item not included/specified but is a standard design of the manufacturer.

(c ). ALTERNATOR shall be self excited, self regulated, brush less for 30KVA continuous operation at the speed of 1500RPM at 415 volts, 50Hz three phase, 4 wire system with advance electronic voltage regulator to ensure high voltage accuracy with +1% with class H insulation and SPDP enclosure directly coupled with engine through flexible couping and conforming to IS-4722 complete-01 No. Note:- Alternator should be able to deliver output rating at actual site condition.

Bottom mounted (or as per manufacturer design) steel fuel tank fabricated out of 14 SWG MS sheet of capactiy not less than 12 hrs continuous operation inside canopy with fuel level guage, drain plug locking arrangements etc with and including GI pipe connections duly laid as per engineering practice complete all as specifided and directed.

(d). Bypass arrangement :- By providing separate panel outdoor type made out of 3.15mm thick CRCA sheet, outdoor type with connecting copper bus bar of suitable size from change over and set of 3 Nos indication lamp for R, Y and B and 2 Nos 4 pole on load change over switch front handle operated of capacity 63 Amp is to be installed near AMF panel complete all as specified and directed.(i) Hour run meter. (ii) Any other item not included/ specified but is a standard design to the manufacturer.

(e). AMF CONTROL PANEL: Inbuilt AMF panel of suitable size including all accessories and measuring instruments as provided by OEM.

Excacation in trenches in soft/ loose soil n. exc 1.5 m wide and n. exc. 1.5 m in depth for foundation etc or laying cables and getting out complete all as specified and directed.

Return filling in including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft/ loose soil after cable are laid and tested complete all as specified and directed..

Removing excavated surplus soil to a distance n. exc. 50m and deposited where directed at a level n. exc.1.5m above the starting point complete all as specified and directed.

M&L for sand filing with clean dry fine sand including gently punning around cables in trenches for cable protection complete all specified and directed. Note : punned thickness sahll be measused and paid.

Supply & Laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

Supply and Laying XLPE insulated LT UG cable PVCsheathed , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor 120 Sqmm 3.5 core laid in trenches or fixed on wall/floor/poles complete all as specified and directed.

All as per item No-09 above but of size 50 Sqmm 3.5 core.

Supply and Laying GI Tubing of lights grade of 80 mm dia with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed

M&L for drilling suitable for horizontal bore holes for insertion/laying of 80mm bore GI tubing of any description below/under road surface/floors etc with using mechanical or manual device as required at site including making good distrubed surface to match with the existing surface after laying pipe complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically at a depth not less than 2.25 metre below normal grond level with top edge of eath plate at a depth not less than 1.5 metre below normal ground level, earth plate surronded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts, and washers made of galvanised iron and connected to main switch board or main control board or equipment with testing point to check the earthing values by providing one No of test terminal block of gun metal or phosporous bronze of size 75x75x25mm drilled and screwed including 3 Nos,8mm dia 25mm long hex head screws including 40mm dia light grade GI pipe for protection of GI strip and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, and PCC chamber pit with PCC (1:3:6) Type C-1 using 20mm graded stone aggregate, well dressed Jodhpur stone slab pit cover of size 40cmx40cmx40mm thick by holing at middle including MS handle made by 10mm dia MS rod, and angle iron frame all around of size 40x40x6mm including excavation and earth work in soft / loose soil ,returning filling and disposal of surplus soil to a distance not exceeding 50m all as shown in electrical plate No 3 of SSR 2009 (Part-1) complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L RCC Design mix M-25 using 20mm graded stone aggregate as in foundation, footing, beam, plinth beam, base for columns, mass concrete etc complete all as specified and directed. Note : Reinforcement & form work shall be measured and paid seperately.

M&L Formwork to side of concrete foundation, footings, base of columns, raft and raft beams, sides and plinth beams with rough finished flat surface complete all as specified and as directed.

M&L RCC Design mix M-25 using 20mm graded stone aggregate as in columns, pillars, piers, post and struts etc and similar work complete all as specified and directed. Note : Reinforcement & form work shall be measured and paid seperately.

M&L Formwork to side of concrete pillars, posts, struts, columns with rough finished surface of concrete complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Ditto all as per item no 20 but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binder.

M&L RCC Design mix M-25 using 20mm graded stone aggregate as in beams, cantilevers, lintels and similar work upto 1.50m span complete all as specified and directed. Note : Reinforcement & form work shall be measured and paid seperately.

M&L Formwork to sides and soffits of floor or roof beams, beam hauching, girders, lintels, shelves etc with rough finished surface of concrete complete all as specified and as directed.

M&L Brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in with CM (1:6) complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) Aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges,anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F Powder coated Aluminium (sliding type) window and ventilators with three track bottom track size 92x29.5x2mm thick, side and top track size 92x29.5x2mm and shutters aluminium anodised 39x20x2 mm thick including necessary fittings like joint cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc with and including 5mm thick tinned glass in panels inluding all fittings and fixture complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F anodised aluminium grill, 10mm thick diamond shape with aperture 75 mm fixed to windows frame with CP brass / stainless steel screw @ 200 mm c/c, including cutting the grill to proper opening size complete all as specified and directed. Make -Deco Grill, model DG-104 or equivalent in Jindal/ Hindalco.

M&L for rendering in cement plaster 15mm thick on fair faces of brick work with and including WPC mixing @ 2% by weight of cement finished even and fair in CM (1:4) complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM (1:6) on other than fair face of brick work finished even and fair without using extra cement complete all as specified and directed.

M&L Prepration of new surface of wall plaster and applying two coats of oil bound distemper over and including 3mm thick wall care putty on wall complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance exterior paint of required shade (Company Depot Tinted) with silicon additive @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surface complete all as specified and directed.

M&L 8mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seem less finish (frame work for ceiling shall be measured and paid separately). complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling of grid size 605x605mm, complete all as specified and directed.

S&F Hanger 6mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fastners 12.50mm dia 40mm long, (size of grid 605x605mm), complete all as specified and directed.

M&L Hardcore of broken stone of guages exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in base of floor complete all as specified and directed.

M&L Vitrified coloured Ceramic tiles 10mm thick (square / ractangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L screed bed or bedding layer 15mm thick with CM (1:6) for laying floor finishes complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection and path finished even and smooth with out using extra cement complete all as specified and directed.

S&F Rolled mild steel roof trusses (framed), trusses, purlins, crane gantries , rails, and fastening and heavy bracket framing, (beam ,tee, angle, channel or flat sections). Conforming to Fe 410-W Gde-E-250 quality 'A' including distance pieces, cleats etc complete all as specified and directed.

S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 10cm and n exc 15cm long complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour have tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Prepration of new steel surface of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for point wiring concealed type with 1.50sqmm FRLS PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor drawn through in and including conceased type rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface & matching with colour to the adjoining wall for the one light/ fan/ exhaust fan point controlled by one piano type switch 5 Amps single pole one way complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm FRLS PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor drawn through in and including conceased type rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface & matching with colour to the adjoining wall for one socket outlet 3/5 pin 5 Amps controlled by one piano type switch on same board complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm FRLS PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor drawn through in and including conceased type rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface matching with colour to the adjoining wall for one socket outlet 3/5 pin 5 Amps controlled by one piano type switch on independent board complete all as specified & directed.

M&L for point wiring concealed type with 2.50sqmm FRLS PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 2.5sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor drawn through in and including concealed type rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surface & matching with colour to the adjoining wall for one independent 15 Amps light/socket outlet point controlled by one piano type switch complete all as specified & directed.

M&L for point wiring concealed type with 4.0sqmm FRLS PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 4.0 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor drawn through in and including conceased type rigid PVC conduit not less than 20mm dia with its accessories making good the disturbed surface & matching with colour to the adjoining wall controlled SP complete all as specified & directed.

S&F switch piano, flush type 5 Amp single pole one way complete all as specified and directed.

S&F socket out let 2 in 1, flush type 5 pin 5 Amp complete all as specified and directed.

S&/F switch piano, flush type 15 Amp complete all as specified and directed.

S&/F socket outlet multi purpose 3 pin 15 Amp and 3 pin 5 Amp, flush type complete all as specified and directed.

S&F ceiling rose surface bakelite ISI Marked three terminal complete all as specified and directed.

S&F stepped type Electronic fan regulator 120 watt, socket type, flush type complete all as specified and directed complete all as specified and directed.

Supply and fix ceiling fans, 230V, 1200mm sweep, with down rod BLDC type complete all as specified and directed.

S&F surface/wall mounting LED batten, 20 watt LED lamp extruded aluminium housing provided for efficient heat dissipating with poly carbonate diffuser & intergrated industrial grade heavy duty electronic driver including lamp complete all as specified and directed.

S&F ceiling recessed mounting 2x2 LED panel square type, slim, compact, LED edge lit panel fitting with high brightness and electronic driver complete of size 36 watt complete all as specified and directed.

M&L for MCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls making good disturbed surfaces to match with existing surfaces etc complete all as directed.

.S&F DB enclosures socket plug top and MCB single pole with a two pin and earth plug and socket fancy type complete with 20 Amp MCB ,240 volts making good disturbed surfaces to match with existing surfaces etc complete all as directed. Make Havells DBOXx /legrand/ Indo Asian

S & F MCB SP 6 to 32 Amps, 240V 'B' Series 10 KA complete all as specified and directed.

S & F MCB DP 40 to 63 Amp 240 Volts 'B' series 10 KA complete all as specified and directed.

Supply and lowering submersible pump set of capacity 1.5 HP,single phase,50 Hz, 80 LPM at 57metre Head, delivery size 32mm water filled, complete all as specified and directed. Make- kirloskar / Crompton/KSB

S&F wall mounted cubical type panel board with locking arrangement and comprising of starter, capacitor, volt meter, indicator lamp, Amp meter & MCB/cut out of capacity suitable for upto 2.0 HP single phase submersible pumping set including fixing arrangement complete all as specified and directed.

M & L for MS clamp made with flat iron 50 x 6 mm for holding of column pipe with suitable size nut, bolt & washers complete all as specified and directed.

M& L for well cap suitable for 125 mm dia made out of 4 mm thick MS plate including making provision for passing GI column pipe of 40 mm dia complete all as specified and directed .

Supply & lowering in bore well 32mm bore high density polyethlene (HDPE) column pipe of pressure rating 6Kg/cm2 with & including all necessary fixing/ jointing accessories complete all as specified and directed. Make- Ashirvad/Kishan/Atul

M&L for boring/drilling in any type of strata upto 100 metre of 125 mm dia by any means including developing bore,flushing up to coming of clean water etc complete all as specified and directed.

Supply & lowering PVC pipe 110 mm dia ISI mark 6 Kg/cm² pressure Plain/slotted complete all as specified and directed.

M&L for pea gravel of suitable size for borewell to be filled around casing pipe of borewell complete all as specified and directed. Note : Sample of pea gravel as approved by GE.

Supply and laying or fixing or passing in well/ borewell 1100 volts grade heavy duty, PVC insulated and PVC sheathed multistranded copper conductor submersible cable of size 2.5sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced.

Supply, laying, testing GI tubing medium grade fixed to wall, ceiling, floor including required GI fitting complete all as specified and directed for the following bore :-

40 mm bore

25 mm bore

Supply & fixing gun metal globe gate valve with iron wheel head, screwed both ends ISI mark for the following sizes complete all as specified & directed :-

40 mm bore

25 mm bore

Demolition of cement concrete in ground floor / paving not exceeding 15cm thick below or above GL unreinforced complete all as specified and directed.

M&L for PCC 1:2:4 type B-I using 20mm graded stone aggregate in, foundation filling and mass concrete ,making plateform around bore well and in similar work complete all as specified andi ditected.

M&L forming new joints upto a depth of 25mm. Saw cutting the vertical sides of joints for making edges of joints straight upto the possible extent by keeping maximum width of joint 10 to 15mm, cleaning all loose particle/dust from the joints by using brushes, compressed air, blowers etc, fixing masking tape along either side of the joints, placing back up sheet 10 to 12 mm thick in position and filled with polyurethane based sealing compound (pitch free) having 3 mm recess from top of joint after applying suitable primer as per manufacturer's instructions and removing masking tape complete all as specified and directed .

Sethi Brothers

GUPTA ENGINEERING WORKS

Balaji Associate

BHARADWAJ BROTHERS