For The Work of installation of new transformers and increasing the capacity of transformers under the jurisdiction of Electricity Urban Distribution Division-Chandra Nagar/Asfabad, Firozabad.

Amount

Carriage following material from Centre Stores, Asfabad to site of work (Distance 00-20 Kms.) through the Kacha and Pakka road including the work of its loading and unloading at the respective ends as per RESPO manual and as per direction of supervising engineer including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work in the area of EUDC, Firozabad (Material shall be provieded by Department)

11 M STP Pole-SP- 55 Galvanised

MS Channel (Droper) 100x50x2028 (For Fuse Set)

MS Top Channel (125x65x2240mm)

33 KV MS Top Channel (125x65mm) 3200MM For Used TF Base Angle

11 KV Disc Insulator T&C Type 4500 kg

11 KV Disc Fitting (suitable for Dog Conductor)

MS Channel125x65x1300mm (T-Off)

11KV Pin Insulator Polymeric

11/0.4 KV T/F 250 KVA

11/0.4 KV T/F 100 KVA

11 KV TPMO

11 KV Fuse Set

Stey set complete 16x1800

Cable LT ABC (3x95+1x70+1x16) sq mm

Dead end clamp with I Hook

ACSR Dog For Jumpering

LT PVC Cable Al 3.5x400 sqmm

LT PVC Cable Al 3.5x150/70 sqmm

LT PVC Cable Al 1x400 sqmm

LT PVC Cable Al 1x240 sqmm

3x120 MM2 AB Cable

Supply of the Following Material.

Stone Pad (300x300x75 mm)

Clamp For LT T-Off with bolts & Nuts

Holding Clamp for top channel TPMO & Fuse Set etc. with bolts & nuts

LT Protection pannel with 03 No. of ckt by Stud type tail less fuse unit 500A

Copper L-Piece 50x225x10mm (LS)

Copper L-Piece 62x225x12mm (LS)

Al Lug long barrel off size (LS)

Lugs 120 mm SQ L.S.

Danger Board Barbed wire including jumper

MS Angle 75x75x6x2028mm with clamp & Bolt and nut (T/F base)

Only Erection of the following Material

Stone Pad (300x300x75 mm)

Clamp For LT T-Off with bolts & Nuts

Holding Clamp for top channel TPMO & Fuse Set etc. with bolts & nuts

LT Protection pannel with 03 No. of ckt by Stud type tail less fuse unit 500A

Copper L-Piece 50x225x10mm (LS)

Copper L-Piece 62x225x12mm (LS)

Al Lug long barrel off size (LS)

Lugs 120 mm SQ L.S.

Danger Board Barbed wire including jumper

MS Angle 75x75x6x2028mm with clamp & Bolt and nut (T/F base)

Erection of Double pole structure 11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Erection of single pole structure 11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms.

Grouting of STP POLE 11 M Lons As per Respo Norms (Cement, Sand, Blast Stone with the ratio 1:4:8) will be provided by conractor

Earthing of pole by M S Earthing Rod 20 x2500 mm and 6 SWG earthing wire etc

Chemical Earthing of Distribution T/F by GI stipp patti as per RESPO manual and as per direction of supervising engineer including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.

Constructionof Distribution Transformer plinth of size 5’x6’x5’ at various places under the jurisdiction of EUDC, Firozabad. The size of plinth shall be of 4’ above the ground level. At the bottom there shall be brick ballast pad of size 5x6’x3” thick in ratio 1:3:6 [Cement, sand and brick ballast]. The first class brick wall work shall be 9” thick in ratio 1:4 [Cement and sand]. The hollow portion among the wall shall be filled up with the brick ballast properly hammered and rammered as per direction of supervising engineer. On the top of the wall there shall be mesh of 12 mm thick iron rod at distance of 9’’ and RCC work in ratio 1:3:6 [Cement, Sand and grit stone] There shall be plastering all over the plinth 12 mm thick in ratio 1:4 [Cement and sand] above the ground level. Proper watering and curing of the plinth shall be carried out as per direction of supervising engineer., and also including the cost of arrangement of labourer, T&P etc required for proper completion of work. 1A- Job work includes all associated works like shifting and Re-placement of the distribution transformer required during construction of plinth. Constructionof RMU plinth of size 2.5’x3’x2.5’ at various places under the jurisdiction of EUDC, Firozabad. The size of plinth shall be of 2’ above the ground level. At the bottom there shall be brick ballast pad of size 2.5'x3’x1.5” thick in ratio 1:3:6 [Cement, sand and brick ballast]. The first class brick wall work shall be 9” thick in ratio 1:4 [Cement and sand]. The hollow portion among the wall shall be filled up with the brick ballast properly hammered and rammered as per direction of supervising engineer. On the top of the wall there shall be mesh of 12 mm thick iron rod at distance of 9’’ and RCC work in ratio 1:3:6 [Cement, Sand and grit stone] There shall be plastering all over the plinth 12 mm thick in ratio 1:4 [Cement and sand] above the ground level. Proper watering and curing of the plinth shall be carried out as per direction of supervising engineer., and also including the cost of arrangement of labourer, T&P etc required for proper completion of work.

Fencing of Distribution Transformers in proper alignment as per RESPO manual and as per direction of supervising engineer including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.

Dismentalling and removal of the following transformers from various 11/0.4 KV substation, under the jurisdiction of Electricity Urban Distribution Circle, Firozabad, and their cartage from site to Centre Store Asfabad (Firozabad) through Kaccha Pakka road as per direction of supervising engineer, including the work of safe loading and unloading at the respective ends and also including the cost of arrangement of laborer, T&P, carrier etc required for proper completion of work. (Distance 00-20 Kms.)

11/0.4 KV T/F 100 KVA

Installation of the Following new transformers at various 11/0.4 KV substation, under the jurisdiction of Electricity Urban Distribution Circle, Firozabad, in proper alignment and direction and making proper HT/LT connection as per instruction of Supervising Engineer after carriage the same from Centre Stores, Asfabad including the work of safe loading and unloading at the respective ends and also including the cost of arrangement of laborer, T&P, carrier etc required for proper completion of work.

11/0.4 KV T/F 250 KVA

11/0.4 KV T/F 100 KVA

Laying of Following Cable

Cable LT ABC (3x95+1x70+1x16) sq mm

M/s APOORWA ELECTRICALS (BID ID -5536769)