Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.3 L
EMD Value
₹11,563
Closing Date
2 Jan 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
EE PRED UDUPI
Construction of new building sub center of primary health center padubidre in kaup taluk (Reserved for ST)
RDPR/2023-24/BD/WORK_INDENT2400
RDPR/2023-24/BD/WORK_INDENT2400
Reserved
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Udupi
4 documents required · 4 mandatory
PWD Contractor Registration Certificate class 4 and above
Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.
Similar Nature of Workdone certificate
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2018-19 to 2022-23)achieved in at least two financial years an average annual financial turn over of Rs 4.62 Lakhs. (usually not less than the estimated cost under this contract for works costing upto Rs. 50.00 Lakhs)
₹500
₹11,563
22 Dec 2023
22 Dec 2023
3 Jan 2024
26 Dec 2023
Construction of new building sub center of primary health center padubidre in kaup taluk (Reserved for ST)
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR Vol-2 I.No.5.3)
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (2021-22 PWD SRI Volume 2 PageNo: 9 Item no 5.4)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S. 3620/1979 having compressive strength not les...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...
Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...
Providing & fixing Granite of any colour, 18 mm thick (slab area above 0.50 m2)..(PWD SR Vol-2 I Page no A20 .No.256)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing Chorinated Poly polyvinyl Chloride (CPVC) pipes Having , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings includin...
Providing and fixing Chorinated Poly polyvinyl Chloride (CPVC) pipes Having , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings includin...
roviding and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak pr...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. (Pwd sr Valume 2 Page no 127 Item no 14.23)
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 (Pwd sr Valume 2 Page no 117 Item no 13.12)
Providing and constructing granite or trap Size stone dry masonry in foundation using stone hammer dressed in courses not less than 20 cms high icluding providing & constructing bond stones 2 mtr apa...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...
Concealed Conduit System Supplying heavy guage PVC conduit Pipe………….mm dia ………….mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., ...
Supplying heavy guage PVC Conduit Pipe…19/20.dia 2.mm thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and ce...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers etc., complete 32 Amps (Item 6.7.2 Page No. 45 PWD Electrical SR)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double bal...
Supplying Patti type fluorescent tube light fitting of 4' - suitable for 28 watts fluorescent tube fitting, made out of M.S Sheet and stove enameled with HF Electronic Ballast locking type brass conta...
Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimme/ telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 Group " A" 6Amps Two way. (I...
Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existi...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materilas and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5mtr long buried in a pit.. The pit should b...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...
Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-1.docx
Tender Document • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .