Construction of Permanent Campus at JNV Hojai Assam

Carriage of excavated material up to 2 km including loading, unloading & stacking

Earthwork in excavation by mechanical means in foundation trenches (all kinds of soil)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m….. All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Pre-construction anti-termite treatment to top of plinth and wall-floor junction (complete as per IS 6313 Part II)

PCC 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 20 mm) in foundation & flooring

PCC 1:4:8 (M7.5) in foundations and plinth

PCC 1:2:4 in copings, sills, anchor blocks, etc.

40 mm thick DPC in 1:2:4 concrete

Extra for waterproofing admixture in concrete

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course…

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) …..

PCC 1:2:4 coping over parapet wall (avg 75 mm × 230 mm)

RCC 1:1.5:3 (M20) in columns, beams, slabs, lintels, foundations, etc. excluding centering, shuttering

Centering and shuttering including strutting, propping etc. and removal of form for all heights: :Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Columns, Pillars, Piers, Abutments, Posts and Struts

Extra for shuttering in circular work (20% of respective centering and shuttering items)

Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like

Edges of slabs and breaks in floors and walls Under 20 cms wide

Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick

Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick

Columns, Pillars, Piers, Abutments, Posts and Struts

Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like

Edges of slabs and breaks in floors and walls Under 20 cms wide

Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick

Reinforcement Fe-500D up to plinth level

Reinforcement Fe-500D above plinth level

Add for plaster drip/groove to RCC projections

BASIC RATE In Figures To be entered by the Bidder Rs. P

RCC M25 (machine batched) up to & above plinth level, incl. pumping & admixtures

Design mix M-25 RCC above plinth to floor V level

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, wit

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)

Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete Flexible Pipe 32mm Dia

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

18 mm marble (RNP/Udaipur/Black) slabs >0.5 sqm on 20 mm CM 1:4

Supplying and fixing modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate as required. 5/6 amps switch

BUILDING PROPER

Edge moulding & polish — granite

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, lift upto 1.5 m.

Providing and fixing sheet covering over expansion joints with iron screws as per design Aluminium fluted strips 3.15 mm thick. 200 mm wide

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions … Engineer-in- charge. Granite Stone of approved shade

Providing wood work in frames of doors, windows, clerestory windows and other frames, wroght framed and fixed in position with hold fast….(hold fast lugs or dash fastener shall be paid for seperately) Second class teak wood

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. a) Marble work

Extra for fixing marble/granite stone, over and above corresponding basic item … complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter…

Providing and fixing M.S. grills of required pattern in frames of windows etc… Fixed to steel windows by welding

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows…….. With 12 mm mild steel U beading

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 90 mm

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 250 mm weighing not less than 150 gms

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75 mm

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes

4 mm thick in doors…(Area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type…35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868).. Twin rubber stopper

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. 2nd class teak wood. 50x50 mm (base and height)

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss.. 1.5 mm thick

Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked,….. With decorative veneering on one side and commercial veneering on other side

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S…… Using M.S. angles 40x40x6 mm for diagonal braces

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of avg width…35mm thick shutters. Kiln seasoned and chemically treated hollock wood

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)..250x16 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)..300x16 mm

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections…. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections,….. Fixing with 15x3 mm lugs 10 cm long embedded in C.C block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting… (a). Electrical resistance or induction welded tubes

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height..

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing… In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)… 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ). a) 250x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : a) 125 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.

Ordinary cement without any pigment

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge… Raj Nagar plain

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with … 25 mm thick.

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.

Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer)..

60 mm M30 interlocking paver blocks incl. 50 mm sand bed

Chequered PCC tiles 22 mm on 20 mm CM 1:4 (medium shade)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer)... skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand)… Size of Tile 600x600 mm

Chequered terrazzo tiles 22 mm (medium shade) on 20 mm CM 1:4

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing & fixing precoated galvanized (PPGL/Galvalume) profile roofing sheets 0.50 mm TCT fixed to purlins with self-drilling screws, including overlaps, cutting & wastage complete

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

uPVC bends/shoes for 160 mm pipes

Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. For 100mm dia. Pipe

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround CI HUBLESS including bed concrete as per standard design Note: This work shall be done all-round PIPE AT ground floor's toilet. 100mm diameter

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two more coast on new work

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters… a) Granite of any colour and shade Area of slab over 0.50 sqm

12 mm thick cement plaster of mix 1:6 (1 cement:6 fine sand)

15 mm cement plaster 1:6 (rough side of wall)

12 mm cement plaster 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on rough side of single/half-brick wall 1:6

Extra for providing mechanical device chain and crank operation for Exceeding 10.00 sqm and upto 16.80 sqm in the area

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).

6 mm cement plaster 1:3 (1 cement : 3 fine sand)

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, etc.... a) Fixing with 15x3 mm lugs 10 cm long embedded in c.c block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

White washing with lime to give an even shade: New work (three or more coats)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming..

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including…

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4... excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)..

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over ..

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand)……….

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC all complete as per direction of Engineer-in-Charge.

Providing and fixing chain-link fencing of required width, 4 mm dia wire mesh with MS angle posts embedded in cement concrete blocks

Providing and fixing alu

minium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections… For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots.. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Applying priming coat: a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and fixing glazing in aluminium door, window, ventilator shutters … With float glass panes of 5.50 mm thickness

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather.. Upto 5mm depth and 5 mm width

Providing and fixing 12 mm thick prelaminated particle board flat pressed three.. with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm).

Providing and laying integral cement based water proofing treatment including preparation of surface.. (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645… (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5.. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with… (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with… (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test… (a) With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and laying cinder filling in sunken floors and other locations with approved quality cinder including watering and light ramming etc. required for proper compaction/completion of the work complete in all respects as per drawings and as directed by the Engineer in Charge.

b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150 mm

c) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel works (second coat)

Roller blinds – black-out fabric

0.47 mm Galvalume sheet roofing incl. fasteners

G.I. frame work for suspended false ceiling

Providing and fixing false ceiling at all heights …. 12 mm plain gypsum board ceiling incl. finishing

DEVELOPMENT WORKS

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed — all kinds of soil

Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden/steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m – all kinds of soil

Earth work in excavation by mechanical/manual means in foundation trenches/drains (≤1.5 m wide/10 sqm), incl. dressing, ramming; lift 1.5 m; lead 50 m — All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m – Quantity of filling @ 35 %

Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete

Extra for every additional lift of 1.5 m in excavation/banking excavated or stacked material – All kinds of soil (1.5 m to 3.0 m).

Extra for every additional lift of 3.0 m to 3.5 m in excavation/banking excavated or stacked material.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Earthwork in all kinds of soil up to 3.0 m depth

Earthwork in all kinds of soil up to 4.5 m depth

Earthwork in all kinds of soil (4.5–6.0 m)

Earthwork up to

4.5 m depth (other reach)

Earthwork 1.5 – 3.0 m (all kinds of soil)

Earthwork 1.5 – 3.0 m (ordinary rock)

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/or good earth to be paid separately) – Quantity of filling @ 50 %

Earthwork in excavation (ordinary rock)

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Precoated GI gutters (approx. 600 mm girth) with joints & brackets complete (two eaves; ≈ 82 m)

Excavating trenches for pipes/cables in all kinds of soil; pipes/cables exceeding 80 mm but not exceeding 300 mm dia

Precoated GI barge boards, up to 300 mm girth (gable ends; ≈ 90 m)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating, and dressing complete.

Damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone III) : 4 graded stone aggregate 12.5 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level (1:4:8 – 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size) derived from natural sources, excluding centering and shuttering, all work up to plinth level

Extra for providing and mixing water-proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification

Providing and applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per sqm on damp proof course after cleaning the surface with brushes and finally wiping with cloth lightly soaked in kerosene oil

Centering & shuttering for walls/retaining walls etc., incl. strutting & propping, removal of formwork

RCC 1:1.5:3 in beams/landings etc.

Centering and shuttering including strutting, propping etc. and removal of form for all heights – Foundations, footings, bases of columns, etc., for mass concrete

Centering & shuttering for slabs/lintels

Centering & shuttering for suspended floors/landings

Centering & shuttering for shelves (cast in situ)

Centering and shuttering for columns, pillars, piers, abutments, posts and struts.

Extra for centering & shuttering for additional height over 3.5 m

Edges of slabs & breaks (<20 cm)

Centering & shuttering for slabs

Centering and shuttering for lintels, beams, plinth beams, girders, bressumers, and cantilevers with water-proof ply 12 mm thick.

Tie bolt with spring coil & plastic cone

Steel reinforcement for RCC

Steel reinforcement (alt. item)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level – Thermo-Mechanically Treated bars of grade Fe-500D or more

Precoated GI ridge/valley 500 mm girth (single ridge ≈ 42 m)

Steel reinforcement for R.C.C. work above plinth level (Fe-500D or more).

R.C.C. work in Footing, concrete of M25 grade (330 kg/cum)

Brick work with common burnt clay F.P.S. (non-modular) bricks of class 7.5 in foundation and plinth in cement mortar 1:6.

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non-modular) bricks of class 7.5 in superstructure above plinth level up to floor V level, in cement mortar 1:6.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)

Granite 18 mm (area of slab >0.50 sqm) incl. bedding, polishing, etc.

Edge moulding to 18 mm granite, machine polished

Extra for fixing marble/granite in facia/drops (≤150 mm) with epoxy

M.S. grills fixed to steel windows by welding, incl. primer

Aluminium sliding door bolt, anodised AC-10 — 300×16 mm

Aluminium tower bolt, anodised AC-10 — 300×10 mm

Aluminium tower bolt, anodised AC-10 — 150×10 mm

Aluminium handle, anodised AC-10 — 125 mm

Aluminium hanging floor door stopper, anodised AC-10 — twin rubber

Aluminium casement stay, anodised AC-10

Structural steel work in built-up sections/trusses/framed work incl. primer

Steel work in tubular sections with 15×3 mm lugs, 10 cm long (incl. priming)

Steel work welded in built-up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc., as required – In gratings, frames, guard bars, ladders, railings, brackets, gates & similar works

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, etc., including welding, grinding, buffing, polishing and fixing with necessary fasteners, bolts, and accessories.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate), 40 mm thick with 20 mm nominal stone aggregate, finished with floating coat of neat cement and cement slurry

52 mm cement concrete floor with hardener

Kota stone slab flooring over 20 mm thick base, laid and jointed with grey cement slurry, base mortar 1:4.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm thick cement mortar 1:3, jointed with grey cement slurry and polished.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 in skirting, risers, dados etc., in CM 1:3, jointed with grey cement slurry (3.3 kg/sqm) and white cement pigment.

Providing and laying 1st quality ceramic glazed floor tiles 300×300 mm in CM 1:4, jointed with grey cement slurry (3.3 kg/sqm) and white cement pigment.

Pre-coated GI profile sheets 0.50 mm (Z-120), fixed with self-drilling screws

Roofing accessories — Gutter (600 mm overall girth), pre-coated GI

12 mm cement plaster 1:6 (rough side)

15 mm cement plaster in CM 1:4 on rough side of wall

15 mm cement plaster on rough side of wall, mix 1:6 (1 cement:6 coarse sand).

12 mm cement plaster finished with floating coat of neat cement (1:4 mix, 1 cement : 4 fine sand) on brick surface

Providing and applying white cement-based putty of average thickness 1 mm, of approved brand, over plastered surface for smooth finish.

6 mm cement plaster 1:3 on brick wall

Plaster of Paris putty 2 mm

Finishing walls with water proofing cement paint of required shade: new work (two or more coats @3.84 kg/10 sqm).

Finishing walls with te

xtured exterior paint of required shade – New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Premium Acrylic Smooth exterior paint (two or more coats over primer)

Priming coat on steel work with red oxide zinc chromate primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade – New work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade – Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Preparation and consolidation of subgrade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth with lead upto 50 metres

Supplying and stacking at site – 63 mm to 45 mm size stone aggregate

Supplying and stacking at site – 53 mm to 22.4 mm size stone aggregate

Supplying and stacking at site – Stone screening 13.2 mm nominal size (Type A)

Supplying and stacking at site – Stone screening 11.2 mm nominal size (Type B)

Supplying and stacking at site – Red Bajri

Supplying and stacking at site – Moorum

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand-picking, rolling with 3-wheeled road/vibratory roller 8–10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia etc. complete

Extra for providing & mixing hardening compound in cement concrete (as per manufacturer’s spec.)

Providing & laying bitumen hot sealing compound for expansion joints (Grade A) – 5 cm × 5 cm

Road surface marking with ready mixed road marking paint, two or more coats on bituminous surface

Providing & fixing glow studs 100×20 mm with retro-reflective panels, fixed with approved adhesive

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron "Y" shaped placed 2.4 m or 3.0 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, with reinforced barbed tape (R.B.T.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/meter (cost of M.S. angle, C.C. blocks shall be paid separately)

Retro-reflective overhead informatory road signage boards (2 mm Al sheet with Type-III sheeting), complete

2.5 mm thermoplastic retro-reflective road marking strips by automatic applicator, complete

Kerb channel 30 cm wide, 50 mm thick in CC 1:3:6 over 75 mm brick ballast bed, finished smooth

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc., all complete as per the direction of Engineer-in-Charge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 Cement : 3 coarse sand), including making joints with or without grooves, making drainage openings wherever required, complete as per direction of Engineer-in-Charge. (Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc., complete as per specifications and directions of Engineer-in-charge. (Panel shuttering work paid separately)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves, drainage opening wherever required, complete as directed by Engineer-in-charge (Precast C.C. kerb stone)

100 mm CI spun iron S&S pipe (IS 3989)

Terminal guard for 100 mm CI pipe

G.I. pipe, 32 mm dia (external work)

G.I. pipe, 40 mm dia

G.I. pipe, 50 mm dia

G.I. pipe, 65 mm dia

G.I. pipe, 80 mm dia

Painting G.I. pipe, 32 mm dia

Painting G.I. pipe, 40 mm dia

Painting G.I. pipe, 50 mm dia

Painting G.I. pipe, 65 mm dia

Painting G.I. pipe, 80 mm dia

Sand filling around G.I. pipe, 32 mm

Sand filling around G.I. pipe, 40 mm

Sand filling around G.I. pipe, 50 mm

Sand filling around G.I. pipe, 65 mm

Sand filling around G.I. pipe, 80 mm

C.I. double acting air valve, 50 mm

C.I. double acting air valve, 80 mm

Gun metal gate valve, 20 mm (screwed end)

Gun metal gate valve, 25 mm

Gun metal gate valve, 32 mm

Gun metal gate valve, 40 mm

Gun metal gate valve, 50 mm

Gun metal gate valve, 65 mm

Gun metal gate valve, 80 mm

Masonry gate valve chamber (30×30×50 cm) with FPS bricks 7.5

Masonry water-meter chamber (60×45×50 cm) with FPS bricks 7.5

G.I. Union, 25 mm

G.I. Union, 32 mm

G.I. Union, 40 mm

G.I. Union, 50 mm

G.I. Union, 65 mm

G.I. Union, 80 mm

Manhole cover 455×610 mm with frame (light duty)

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand) including testing of joints, etc., complete — 450 mm dia R.C.C. pipe

Constructing brick masonry manhole (90×80×45 cm) with RCC slab, plastering, channels etc.; with FPS bricks class 7.5 and light duty CI cover

Extra depth for manhole size 90×80 cm; with FPS bricks class 7.5

Brick masonry circula

r manhole (0.91 m dia bottom, 0.56 m top) 0.91 m deep with HD-20 SFRC cover & frame; with FPS bricks class 7.5

uPVC (SN-4) rainwater pipes 160 mm dia, with specials & clamps (8 downpipes × ~7 m ≈ 56 m)

uPVC moulded fitting – Bend 87.5°, 110 mm

Extra depth for circular manholes 0.91 m dia beyond 0.91 m to 1.67 m; with FPS bricks class 7.5

Providing & fixing square mouth S.W. gully trap SP-1, 180×150 mm “P” type with brick masonry chamber & watertight CI cover; with FPS bricks class 7.5

M.S. foot rests in manholes (20×20×10 cm CC 1:3:6; 20×20 mm sq. bar)

Orange colour plastic encapsulated foot rest

Soak pit 2.5 m dia × 3.0 m deep (honey-comb shaft)

Providing and placing PVC water stops (IS:12200) for RCC joints – serrated with central bulb, 225 mm wide, 8–11 mm thick.

Providing and applying integral crystalline slurry waterproofing on vertical RCC surfaces (two coats @ 0.70 kg/sqm/coat).

Providing and applying integral crystalline slurry waterproofing on horizontal RCC surfaces (one coat @ 1.10 kg/sqm).

Drilling through rocky strata incl. boulders (300 mm)

Boring/drilling for casing/strainer pipe up to 90 m depth – 400 mm dia, all types of soil

Boring/drilling beyond 90 m & up to 150 m – 400 mm dia, all types of soil

PVC well screen pipe 150 mm (IS:12818)

Stone boulders 5–20 cm in recharge pit

Gravel 5–10 mm in recharge pit

Coarse sand 1.5–2.0 mm in recharge pit

Gravel packing in tubewell (IS 4097)

ERW FE-410 M.S. casing pipe 200 mm dia, min. 5.40 mm wall, including painting & accessories

ERW FE-410 plain-slotted pipe 200 mm dia, min. 5.40 mm wall, including painting & accessories

uPVC moulded fitting – Shoe (Plain) 110 mm

Development of tubewell with compressor, testing & disinfection

Mild steel threaded cap / plate for borewell – 200 mm

M.S. clamp for casing/housing pipe – 200 mm

M.S. clamp for casing/housing pipe – 200 mm

Bail / bottom plug – 200 mm

Hand Operated Hydraulic Moveable Basketball System with 20 mm thick transparent acrylic board, aluminium anodized frame, dunking rims, non-marking wheels, and hydraulic lifting system as per BFI specifications – complete set

Providing & fixing uPVC pipe clips, with hardwood plugs & CM 1:4 making good – 110 mm

Handball Goal Post Poles (moveable) – 3 m width × 2 m height, made of M.S. Pipe 80 mm dia (3.2 mm thick) with rear pipes, hooks, wheels and heavy-duty net – complete set

Volleyball Poles (Basic model) with overlapping system for height adjustment, including plastic coated steel wire net and fiberglass antenna – complete set

Line marking of Badminton Court on Kota stone flooring as per international rules with paint (Asian / Berger or equivalent)

Installation Charges for sports equipment and fixtures

Supply & fixing HDPE double wall corrugated pipe IS 16098 (Part-2) for underground drainage incl. specials, re-excavation & refilling; 200 mm dia

Borewell submersible pumping set (15 HP approx., 15000 L/h @ 250 m head) incl. cable, panel, uPVC riser, fittings & clamps – complete

65 mm G.I. pipe with fittings, supports & two coats enamel paint

Outdoor weather-proof plumbing panel with MCCB, metering, SPD, bus-bar, MCBs; supply, fixing, testing & commissioning

125 micron polythene sheet (7 sqm/kg)

HORTICULTURE

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and disposal of surplus soil, spreading and leveling, refilling with earth mixed with sludge/manure before and after flooding.

Supplying and stacking sludge at site including royalty and carriage up to 5 km lead (measured in stacks reduced by 8% for payment).

Supplying and stacking dump manure from approved source including carriage up to 5 km (reduced by 8% for payment).

Mixing earth and sludge/manure in required proportion as directed by Officer-in-Charge.

Grassing with Doob grass in rows 5 cm apart in both directions, including watering and maintenance for 30 days or more.

Uprooting rank vegetation and weeds, digging area to 60 cm depth, removing roots, flooding, fine dressing for new grass, disposal of rubbish.

Preparation of beds for hedging and shrubbery by excavating 60 cm deep, refilling with earth and sludge/manure (8:1), flooding and dressing.

Digging holes in ordinary soil and refilling with excavated earth mixed with manure/sludge (2:1), flooding with water, dressing, removing surplus earth.

Edging with bricks laid dry lengthwise, excavation, refilling, consolidating with hand packing and neat dressing.

Flooding the ground with water including making kiaries and dismantling the same.

Providing and watering of irrigation water through water tanker (5000 L), including cost of water, filling, and site watering, as per direction. (30 trips in 3 months at 3-day intervals)

Plantation of Trees, Shrubs, and Hedge at site including watering and removal of unserviceable materials (Hedge Plant/Ground cover).

Providing and stacking of Cassia fistula (Amaltash) of height 120–135 cm in big poly bags (25 cm).

Providing and stacking of Hibiscus rosasinensis of height 45–60 cm with 3–4 branches in earthen pots (20 cm).

Providing and stacking of Delonix regia (Gulmohar) of height 150–165 cm in big poly bags (25 cm).

Supply and stacking of Azadirachta indica (Neem) plant of height 120–130 cm in big poly bags (25 cm).

Providing and stacking of Bottle palm of height 210–240 cm, bottom girth 30–35 cm, in big HDPE bags.

Providing and stacking of Foxtail palm of height 240–270 cm, bottom girth 35–40 cm, in big HDPE bags.

Providing and stacking of Mangifera indica (Mango grafted) height 60–75 cm in big poly bags (25 cm).

Providing and stacking of Michelia champa (Golden Champa) height 90–105 cm in earthen pots (25 cm).

Providing and stacking of Peltophorum species height 150–165 cm in big poly bags (25 cm).

Providing and displaying Marigold Jaffri French orange/yellow/Russet, 60–75 cm height, 60–75 flowers, in 30 cm pot.

Providing and stacking of Spider plant (Chlorophytum comosum).

h all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installtion of exhasut fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the abvoe fan, making good the damage, connection testiing and commissioning etc as requried

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing toilet paper holder : 17.34.1) C.P. brass

of coupling of approved municipal design.

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer…

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required.

Supllying, Installation, Testing & commisioning of following type LED reccesed/surface mounted light fixture made of Aluminium die cast, proper heat sink, minimum 90Lm/W complete in all aspects as mentioned in this tender. With 5 Years Warranty on LED and Driver 10 W LED downlight

Providing and stacking of Lemon tree.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre…… even shade and colour. Two coats

Supplying and fixing following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit or cutting the wall and mak ing good the same of recessed conduit as required. 25mm

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, e etc. complete as per the direction of Engineer-in-charge.

Providing and fixing aluminium door buffer of approved make, design and colour with necessary screws etc all complete as directed and specified by the Engineer-in Charge :

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

3 pin 5/6 amps socket outlet

Supplying and fixing 20 amps, 240 volts SPN industrial type, socket outlet with 2 poles and earth metal enclosed plug top along with 20 amps "C' Curve, SP, MCB in sheet steel encloser on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing & commissioning etc in required.

Providing and laying 1st quality ceramic glazed Anti skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) conforming to IS:15622 in all colours, shades, sizes as approved over 20 mm thick bed of Cement Mortar 1: 4 (1 cement : 4 Coarse Sand) including pointing the joints with white cement and matching pigment etc all complete in all respect as per specification/drawings and as directed and specified by the Engineer-in-Charge.

Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms

20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

32 mm nominal outer dia pipes

40 mm nominal outer dia pipes

50 mm nominal outer dia pipes

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge concealed work including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes

20 mm nominal outer dia pipes

Providing, fixing and jointing in position UPVC (SWR) pipe Type-B for soil waste, rain water and vent or antisyphonage pipe of approved make including all fittings (plain or door) e.g. bends, junctions, cowls, offsets, access pieces jointing including fixing the pipe on the wall/ceiling with suitable clamps ,holder bat clamps and anchor fastener of approved design to SWR pipe embedded, cement concrete block 10x10x 10 cm of 1:2:4 ( 1 cement: 4 coarse sand: 4 graded stone aggregate 20 mm nominal size), cutting holes in wall and floors, excavation, refilling and disposal of surplus earth where required and marked good complete etc. and as per direction of Engineer in Charge. 40 mm dia

32 mm dia, nominal bore

40 mm dia, nominal bore

50 mm dia, nominal bore

65 mm dia, nominal bore

Supllying, Installation, Testing & commisioning of following type LED reccesed/surface mounted light fixture made of Aluminium die cast, proper heat sink, minimum 90Lm/W complete in all aspects as mentioned in this tender. With 5 Years Warranty on LED and Driver 20W LED Tube light

Providing and fixing UPVC(SWR) Type-B of size 110 mm x 90 mm Nahani Trap along with 110 mm dia PVC pipe up to floor level and PVC grating of approved make with suitable jointing to ensure leak proof service as per instruction for laying & jointing recommended by the manufacturer and including cement concrete 1:2:4 under and around the Nahani trap where required up to floor level complete in all respects including cutting and making good the walls and floors etc. complete in all respect as per full satisfaction of the Engineer – in – Charge. With 90 mm i/d outlet.

32 mm dia, nominal bore

40 mm dia, nominal bore

50 mm dia, nominal bore

Providing and fixing end cap (door piece) of uPVC for cleaning. with 110 OD

50 nominal bore

80 nominal bore

Providing, fixing, testing and commissioning of pipe inlet fittings fabricated with Upvc with maximum 3 inlets 40, 50 & 75 mm OD size Upvc pipe, fixed to 'P' traps including Dripseal/Pipe seal/solvent /rubber ring joint complete .

20mm nominal bore

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal work -Exposed on Wall 15 mm nominal outer dia pipes

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.1) Rectangular shape 453x357 mm

Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work) For roof level 25 mm dia, nominal bore

80 nominal bore

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 1 M.S. tube

Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 25mm dia, nominal bore

Providing

50 mm dia

110 mm dia

Providing and fixing UPVC(SWR) Type-B of size 110 mm x75x40 mm Multi Floor Trap along with 110 mm dia PVC pipe up to floor level and PVC grating of approved make with suitable jointing to ensure leak proof service as per instruction for laying & jointing recommended by the manufacturer and including cement concrete 1:2:4 under and around the multi floor trap where required up to floor level complete in all respects including cutting and making good the walls and floors etc. complete in all respect as per full satisfaction of the Engineer – in – Charge. With 63 mm i/d outlet. ( 110 x 75 x 40)

and stacking of Banana tree.

Providing and fixing of Precast RCC Garden Bench including all labour, T&P etc. complete.

Providing and fixing uPVC 110mm P Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections

Laying of watering/sprinkler pipe along garden, making outlet points and providing 2 hose pipes for new lawn/garden.

Providing and fixing gun metal non- return valve of approved quality (PN 1.6) 40 nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

Providing and fixing brass stop cock of approved quality 15mm nominal bore

Structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified 65 nominal bore

Cast iron grating for inlet mouth of rain water pipe, 15 cm dia, ≥440 g

R.C.C. work in Beam (above plinth level up to floor V) Add for extra cement in RCC M-25

RCC MH cover & frame LD-2.5, 600×450 mm

RCC MH cover & frame HD-20, 560 mm dia

Chain Link Fencing (3.0 m high) – including posts, supports and all fixtures

Wiring for light point / fan point /exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch,modular plate ,suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C

Point

b) Group A

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper condutor single core cable in surface / recessed PVC conduit 2 way modular switch,modular plate,suitable GI box and earthing the point with 1.5 sq.mm .FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point / fan point /exhaust fan point/ call bell point (without independent switch) with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed Steel Conduit, with modular switch,modular plate ,suitable GI Box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. a) Group C

Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 1 No 4 sq.mm FRLS PVC insulate

d copper conductor single core cable for loop earthing as required.

Meter

Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 2 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

(ii) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire

(iii) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire

(iv) 2x6 sq.mm + 1x6 sq.mm earth wire

(v) 4x10 sq.mm + 2x6 sq.mm earth wire.

(vi) 4x16 sq.mm + 2x6 sq.mm earth wire

(vii) 2x10 sq.mm + 1x6 sq.mm earth wire

(v) 4x6 sq.mm + 2x6 sq.mm earth wire.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.

Supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 5/6 amps switch

3 pin 5/6 amps socket outlet

Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmx75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch ,connection etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 and 5/6 amps modular socket outlet with shulter and 15/16 amps modular switch connection, etc as required.

Supplying and fixing call bell/ buzzer suitable for single phase ,230 volts ,complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with acessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (i) 25mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing of 25A modular socket outlet and 25A modular SP MCB "C" curve including connections painting etc. as required.

Supplying and fixing 30 amps, 415 volts TPN industrial type, socket outlet with 4 pole and earth metal enclosed plug top along with 30 amps 'C' Curve, TP, MCB in sheet steel encloser on surface or in recess with chained metal cover for the socket outlet and complete with conncections, testing & commissioning etc as required.

Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box with mould cord outlet complete with RJ 45 sockets as required for computer data point.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required 1 Run of Cable

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 4 way (4+12) Double door

6 way (4+18) Double door

8 way (4+24) Double door

Supplying and fixing following way, horizontal type single pole and neutral, sheet steel, MCB distribution board, 230 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 8 way, Double door

Supply and fixing 5 amps to 32 amps rating.240/415 volts.'C' curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commisioning etc.as required a) Single pole

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 amps

Supplying and fixing following rating, double pole, (single phase and neutral), 230 volts, residual current circuit breaker (RCCB), having a sensitivity 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 amps

Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. a) 75mm x 75mm

Supplying and drawing following pair, 0.5.mm dia FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. a) 2 Pair

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding plate etc .as required. a) Telephone socket outlet

b) TV outlet

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. a) 15 mm nominal dia.

Supplying and fixing of the following sheet steel clad wall / recess mounting telephone tag blocks of krone make constructed from 14 SWG sheet steel finished with red oxide coating of two coats of paint with hinged gasketted powder coated door and complete. a20 pairs

b) 05 pairs

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

a) 15W LED Downlighter

b) 22W LED Tubelight

c) 18W LED Tubelight

d) 2x2 36W LED Panel

Bracket Light

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in-charge

10W LED Bulkhead

Providing and fixing wash bashin with C.I. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required - a) White vitreous china wash basin size 550x400 mm with a 15 mm cp brass singal hole basin mixer.

Supplying of 305 mm 1400 RPM exhaust fan complete with louver and bird guard screen with 3 core flexible wire as required.

Providing and fixing in position 25 mm diameter mosquito pro

Providing and fixing in position 25 mm diameter mosquito pro

Providing and fixing GI pipes medium class conferming to IS 1239 with GI fittings including cutting hole chase painted with primer, two coats of enamel paints etc 80 mm dia, NB

Providing and fixing brass ball valve with SS 304 Stem and ball, teflon seat complete (PN-40). 15 mm dia nominal bore

Providing, fixing, testing and commissioning of motorised butterfly valve of following dia for filling of overhead water tank complete with high and low level control switches to control tanks. The level controllers shall be installed in iverhead tanks. The level switch will close the valve when water level is high in overhead tank and open the valve when overhead water tank level is low. The system should be complete in all respects with accessories 220 V AC / 2 V DC, IP67 electrical water level control unit, copper control wiring in whether proof casing etc. 50 mm dia NB Float Valve

INTERNAL ELECTRIFICATION

EXTERNAL ELECTRIFICATION

Providing & fixing MV Danger Notice Plate (200×150 mm, 2 mm MS, vitreous enamel)

Providing & fixing HT Danger Notice Plate (250×200 mm, 2 mm MS, vitreous enamel)

11 kV HT DP structure complete (RSJ poles, AB switch, HG fuses, LA, insulators, stays, foundations, painting, accessories & commissioning)

11 kV HT metering panel (indoor) with trivector meter, CT/PT set, tested/approved by supply authority

11 kV HT switchboard (single panel, VCB 630A with protections, CT/PT set, relays, power pack, joint box etc.)

230V AC to 24V DC battery charger (SMPS) with 24V, 120Ah SMF batteries & DC DB (1×63A DP + 12×20/16A DP MCBs)

250 kVA, 11/0.433 kV ONAN transformer with OLTC, AVS & RTCC, complete as specified

3C×300 sq.mm, 11 kV (E) XLPE Al. armoured cable (supply)

Laying 11 kV power cable above 120 sq.mm up to 400 sq.mm direct in ground

Indoor 11 kV end termination (HS kit) for 3C Al. XLPE 300 sq.mm

Outdoor 11 kV end termination (HS kit) for 3C Al. XLPE 300 sq.mm

Providing/laying RCC NP2 Hume pipe 150 mm ID with collars, trenching & refilling

Providing/laying RCC NP2 Hume pipe 300 mm ID with collars, trenching & refilling

Fire bucket set (4 nos with stand), filled with sand, painted & complete

Approved Single Line Diagram framed (1000×800 mm) installed in MSR

First Aid box

Tool kit with one pair 11 kV rubber hand gloves

Shock-treatment charts (Eng & Hindi) framed and covered with glass

Safety mat, Class B, 1.2 m wide, 2.5 mm thick (12 kV withstand)

Safety mat, Class A, 1.2 m wide, 2.0 mm thick (1.1 kV withstand)

62.5 kVA DG set with outdoor acoustic enclosure, controller, batteries/charger, base, AV pads, foundation & commissioning

Main LT Panel (415V, 3Ø4W, 55 kA, Form-3B, type tested) with incomer from 250 kVA Tx, metering/relays, 500A TPN Al busbar & listed outgoings

Incomer from 60 kVA DG – essential panel with 125A busbar & listed outgoings (4×63A FP MCCB + 40×40A DP MCB), metering/indication

Capacitor Panel 90 kVAr with APFC relay, 200A busbar & sta

ged banks (25/10/5 kVAr) with contactors & protections

External Lighting Panel (OD, weatherproof) 63A FP MCCB incomer, metering, SPD, 100A busbar & outgoings

Feeder Pillar-1 (Type-3, Type-2, Type-5 & Guest House) 200A incomer, 250A busbar, outgoings 2×100A + 6×63A MCCB

Feeder Pillar-2 (Boys Dormitory, Type-4, Girls Dormitory, Kitchen & Dining) 200A incomer, 250A busbar, outgoings 6×63A MCCB

MDB Panel Type-2 (G+4) 100A incomer, 125A busbar, 14×40A FP MCB outgoings

MDB Panel Type-3 (G+2) 63A incomer, 100A busbar, 10×40A FP MCB outgoings

MDB Panel Type-3 (G+1) 63A incomer, 100A busbar, 7×40A FP MCB outgoings

MDB Panel Type-5 / Type-4 / Guest House (set of 3) 63A incomer, 100A busbar, 6×40A FP MCB outgoings

MDB Panel – School, Boys Dorm, Girls Dorm, Kitchen & Dining (set of 4) with mixed outgoings 4×63A + 4×40A FP MCB + 4×25A DP MCB

Laying 1.1 kV power cable up to 35 sq.mm direct in ground

Laying above 35 sq.mm & up to 95 sq.mm direct in ground

Laying above 95 sq.mm & up to 185 sq.mm direct in ground

Laying above 185 sq.mm & up to 400 sq.mm direct in ground

Supply 2×6 sq.mm Al. armoured cable (28 mm)

Supply 4×10 sq.mm Al. armoured cable (28 mm)

Supply 3½×35 sq.mm Al. armoured cable (32 mm)

Supply 3½×50 sq.mm Al. armoured cable (35 mm)

Supply 3½×70 sq.mm Al. armoured cable (38 mm)

Supply 3½×95 sq.mm Al. armoured cable (45 mm)

Supply 3½×120 sq.mm Al. armoured cable (45 mm)

Supply 3½×150 sq.mm Al. armoured cable (50 mm)

Supply 3½×185 sq.mm Al. armoured cable (57 mm)

Supply 3½×240 sq.mm Al. armoured cable (62 mm)

Supply 3½×300 sq.mm Al. armoured cable (70 mm)

End termination for 2×6 sq.mm (DSR-equiv)

End termination for 4×10 sq.mm

End termination for 3½×35 sq.mm

End termination for 3½×50 sq.mm

End termination for 3½×70 sq.mm

End termination for 3½×95 sq.mm

End termination for 3½×120 sq.mm

End termination for 3½×150 sq.mm

End termination for 3½×185 sq.mm

End termination for 3½×240 sq.mm

End termination for 3½×300 sq.mm

Earthing with 600×600×6 mm GI earth plate, enclosure, cover & watering pipe with charcoal/coke & salt

Earthing with 600×600×3 mm Cu earth plate, enclosure (CI cover), watering pipe with charcoal/coke & salt

25×5 mm copper strip on surface/in recess for connections

25×5 mm GI strip on surface/in recess for connections

Erection of metallic pole above 3 m & up to 6 m in CC 1:3:6 foundation

100 W LED floodlight IP66 (≥10,000 lm), complete

45 W LED post top light IP65 (≥4,500 lm), complete

42 W LED gate light IP65 (≥4,200 lm), complete

45 W LED street light IP66 (≥4,500 lm), complete

45 W LED solar street light on 4 m GI octagonal pole (integrated), complete

4.0 m GI octagonal pole with inbuilt JB & base plate (single/double arm)

200×150×125 mm polycarbonate IP55 junction box with SP MCBs & TB

Cable through GI pipe to JB & 2×2.5 sq.mm Cu wiring from JB to fixture

FIRE FIGHTING

Supplying, installation, testing and commissioning of electric driven terrace pump (450 LPM at 35 m head) complete with motor, base plate, coupling, anti-vibration pad etc.

Fire brigade connection (2-way, 100 mm dia MS pipe)

Pressure switch in MS pipeline including connection

Single-headed internal hydrant valve (SS Type-A IS 5290) with blank cap & chain

Short branch pipe (63 mm dia, SS Grade 304) with 20 mm nozzle

RRL hose pipe 63 mm dia × 15 m long with SS couplings

First-aid hose reel (MS), 40 m; hose, gunmetal valve & nozzle, drum, brackets, connections to riser

Angle iron (40×40×5 mm) door frame & 6 mm MS/glass shutter 2.1×0.9 m with fittings, locking & painting

Laying, testing & commissioning of C-class heavy-duty MS pipe 100 mm dia (IS 1239/3589) incl. fittings, welding, supports, coating

C-class MS pipe 100 mm dia (wall/ceiling with painting)

C-class MS pipe 80 mm dia (wall/ceiling with painting)

C-class MS pipe 25 mm dia (wall/ceiling with painting)

Butterfly valve PN 1.6, 100 mm dia, ISI marked (bronze/gunmetal seat)

Non-return valve 100 mm dia IS 5312 with gasket, bolts & washers

Gunmetal gate valve 25 mm nominal bore with CI wheel (screwed end)

SS Y-strainer 100 mm dia, Grade 304