Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹27.5 L+₹1.7 L (6.64%)Rejected-Finance | L2 | Rejected-Finance Other than lowest. |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
24 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer Services AF Stn Adampur 144103
MISC REPAIR TO CERTAIN BLDGS AT WSA-III IN TECH AREA AT AF STN ADAMPUR
2022_MES_565734_1
GE/AF/ADM-38/2022-23
Open Tender
Civil Works
Item Rate
180 days
Tech area at AF Stn Adampur
Refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE AF Adampur
₹50,000
Yes
13 Jan 2023
28 Nov 2022
26 Dec 2022
28 Nov 2022
24 Dec 2022
12 Dec 2022
29 Nov 2022 - 10 Dec 2022
Amount
Excavation in trenches n. exc 1.5 m wide for foundation, laying of pipes, drain, trenches etc. getting out in soft/ loose soil by manually not exceeding 1.50 metre deep and getting out complete, all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete, all as specified.
Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.
PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in filling & mass concrete, complete all as specified.
PCC type C-2 (1:3:6), using 40 mm graded stone aggregates as in surface channels & drains etc. complete all as specified.
Cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in surface channel, coping and drain complete all as specified.
Supply only water proofing compound, ISI marked, complete all as specified.
Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Brick work using old size bricks (EXCEPT BRICKS), straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified.
Brick work using bricks as specified in PS-II clause 5.1 straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4), complete all as specified.
Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples all as specified.
Factory made 'P' tube steel windows with side hung shutter with glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
NOTES APPLICABLE TO SERIAL ITEM NO. 12: Profile section used under these items shall be ERW hollow 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.
Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.
Glazed ceramic coloured tiles 7 8mm thick (square/ rectangular) area of each tile exc. 0.16 sq.m but n. exc. 0.20 sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry & pointed with polymer based grout of matching shade, laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified.
First quality, vitrified ceramic, double charged straight cut/joint free, 10 mm thick dark shade tiles, area of each tile not exceeding 0.36 Sq.m, in floors etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with polymer based grout of matching shade, complete, all as specified.
Factory made PCC type A-1 chequered tiles, ISI marked (IS:13801), with grey cement & pigment, 22-25 mm thick, of size 300 mm x 300 mm, and any shape & colour in floors, over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry, complete, all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4) complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified. NOTE:- WPC measured & paid separately.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer in four shades of disruptive/camouflaging pattern .
NOTE FOR SERIAL ITEM NO. 19 (i) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit the same with Enginer-in-Charge and same shall be issued to contractor on daily basis as per consumption at site. (ii) The work shall be got executed through paint manufacturer/ authorised applicators of manufacturer's as specified in relevent PS clause. (iii) RGB value of four shades of disruptive/camouflaging pattern shall be all as shown on Drg No. GE/SK-1/19 sheet 1/2 & 2/2.
Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified.
Cement concrete work 200 mm thick in pavement / hard-standing of flexural strength 45 kg / Sq.cm in field using 400 kg of cement per cubic metre including necessary from work and bull nosing, rounding off edges finish by brooming / belting etc. laid in single layer complete all as specified.
Forming contraction (Dummy) joint 25mm deep x 8mm wide including provision of 10 mm dia polyurethene foam closed cell backup rod and sealed with polyurethene sealent (min depth of sealent 12mm) after priming the vertical surface with approved primer twice @ 0.075 litre (minimum) per square metre complete all as specified.
Forming 8-12 mm wide construction Joints in rigid pavements by using polyurethane joint sealent (minimum depth 13 mm) after priming the vertical surface twice @ 0.075 litre (minimum) approved primer per square metre sealed flush to a level of 2-3 mm below the top of the adjacent pavement and provision of 10 mm dia polyurethene foam closed cell backup rod complete all as specified.
Forming 25mm expansion Joints in rigid pavements by using polyurethane joint sealent (minimum depth 12 mm) after priming the vertical surface twice @ 0.075 litre (minimum) approved primer per square metre and sealed flush to a level of 2-3 mm below the top of the adjacent pavement and provision of 30 mm dia polyurethene foam closed cell backup rod complete all as specified.
Forming embankments including raising (or lowering) earth, spreading in layers n exc 30 cm thick, watering, ramming to obtain optimum moisture condition to the specified percentage of standard proctor density not less than 95 percent and finishing to required size & shape as directed by Engineer-in-Charge for height : -
Not exceeding 1.5 metre high from base
Exceeding 1.5 metre but not exceeding 3 metre high from base
Exceeding 3 metre but not exceeding 4.5 metre high from base
Exceeding 4.5 metre but not exceeding 6 metre high from base
NOTES FOR SERIAL ITEM NO 25 : - (i) Quoted rates shall include the cost of earth / soil to be brought from out side MoD land. (ii) Removing boulders / lumps of size 75mm and above by screening the soil before filling in traverse.
DISMANLING/DEMOLITION WORKS
Taking down framed steel doors, window, gates, partitions etc area not exc 4 Sq. m each complete all as specified.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified.
Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
Demolition of (un-reinforced) cement concrete (PQC) of any description and in any position not otherwise specifically provided, with rock breaker or compressor breaker pin complete all as specified. NOTE:- Ulmost care to be taken not to distrub adjacent pavement slab while cutting / dismantling slab.
NOTE : Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.
PRATHAM TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .