Special Repairs - Rewiring and renewal of SBT fittings, Fans, Powermain arrangements to the Primary Health Centre at Ottanatham in Thoothukudi District.

Rewiring with 2 x 1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light /fan point (for electronic regulator) (5 points per coil).

Renewal by supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting.

Renewal by supply and fixing of 9W LED bulb in the existing BH's.

Renewal by Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Renewal by supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18").

Renewal by supply and fixing of 1 No 15A 3 pin combined flush type wall socket with 15A flush type switch and 3 Nos 5A (3 pin & 2 pin) combined flush type wall socket with control switches on suitable TW box covered with hylem sheet in flush with wall with earth connection.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End.

Renewal by Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 32A 4P MCB as incoming and 12 Nos 6A to 32A SP MCB as outgoing in flush with wall with Earth connection only. Higher End.

Supply and fixing of 65mm dia GI pipe (Class 'B') 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting and construction of masonary pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door and lock and key arrangements with supply and fixing of 60 W LED street light fitting with bulb and with supply and fixing of 1No. 16A fuse unit (500V) and 5A SP switch inside the MS box with PVC unsheathed FRLS leads and painting of suitable colour.

Supply erection, testing and commissioning of 1.5TR (6000 K.cal/Hr) ABS Plastic Split type Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with rotary compressor operating on refrigerant R-32/non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with star rating of 3 star as per BEE specification and capable of performing the functions of Cooling Dehumidifying Air Circulating Filtering The installation works for the above split type AC units includes the following. 1. Mounting / Fitting Indoor and outdoor units at their respective locations.