WBHOUSING/SE/RCFA/e-NIT-01(2ND CALL)/2025-26

Depth of excavation for additional depth beyond1,500 mm. and upto 3,000 mm. but not requiring shoring.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Cement concrete with graded stone ballast (40 mm size excluding shuttering) [Pakur Variety] 1:3:6 proportion

1st floor

2nd floor

3rd floor

4th floor

Brick work with 1st class modular bricks. With cement mortar (1:6) In foundation plinth

1st floor

2nd floor

3rd floor

4th floor

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement. (In Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Ready mixed cement concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m……………Without approved conc. pump (In Ground Floor)

200 mm. thick Brick work with Fly Ash Bricks set in cement sand mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect.

1st floor

2nd floor

3rd floor

4th floor

100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

1st floor

2nd floor

3rd floor

4th floor

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed. With 1:6 cement mortar/ 15 mm External Plaster, (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

With 1:4 cement mortar / 10 mm thick plaster. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(Ground Floor)

25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed. 35 mm. thick. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. (Gr. Floor)

1st floor

2nd floor

3rd floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly. Two Coats. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

PVC Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. (Ground Floor).

1st floor

2nd floor

3rd floor

Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x50mm x 2mm (+/-0.2mm), (Gr. Floor)

1st floor

2nd floor

3rd floor

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming. 25 x 25 x 5 mm. (Gr. Floor)

1st floor

2nd floor

3rd floor

4th floor

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber. 35 mm thick shutters (single leaf). (Gr. Floor)

1st floor

2nd floor

3rd floor

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 75mm. X 3.50mm. (Ground Floor)

1st floor

2nd floor

3rd floor

1st floor

2nd floor

3rd floor

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 300mm long. (Gr. Floor)

1st floor

2nd floor

3rd floor

100mm long x 10mm dia. bolt. (Gr. Floor)

1st floor

2nd floor

3rd floor

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming. 75 x 63 x 3.2mm. (Gr. Floor)

1st floor

2nd floor

3rd floor

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming. 100 mm grip x 10 mm dia rod. (Ground Floor)

1st floor

2nd floor

3rd floor

1st floor

2nd floor

3rd floor

Door stopper (Anodised aluminium) (Ground Floor)

1st floor

2nd floor

3rd floor

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975. Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. (Ground Floor)

1st floor

2nd floor

3rd floor

M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. (Ground Floor)

1st floor

2nd floor

3rd floor

Two point nose steel handle including fitting and fixing. (Ground Floor)

1st floor

2nd floor

3rd floor

steel peg stay 300 mm long including fitting and fixing. (Gr. Floor)

1st floor

2nd floor

3rd floor

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Extra for work in grill gate.(I) For hanging and locking arrangements including supply of materials and labour complete. (Ground Floor)

1st floor

2nd floor

3rd floor

White washing including cleaning and smoothening surface thoroughly. Three coats (on new works only). Internal Plaster. (Ground Floor)

1st floor

2nd floor

3rd floor

Supplying fitting and fixing door frame with M.S. angle as per drawing & direction of required section.The holes for counter sunk machine screw. Angle - 40 x 40 x 6. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. (Gr. Floor)

4th floor

Priming one coat on timber or plastered surface with synthetic oil bound primer of --- etc. (Ground Floor)

1st floor

2nd floor

3rd floor

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening. (Gr. Floor)

1st floor

2nd floor

3rd floor

4th floor

Painting with best quality synthetic enamel paint of approved make and brand including --- etc. On timber or plastered surface : Two coats (with any shade except white). With super gloss (hi-gloss). (Ground Floor)

1st floor

2nd floor

3rd floor

On steel or other metal surface : With super gloss (hi-gloss). (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (Ground Floor)

1st floor

2nd floor

3rd floor

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes. 110 mm. Dia.

75 mm. Dia.

Plain Tee. 75 mm. Dia.

Bend 87.5 degree. 110 mm. Dia.

Shoe 110 mm. Dia.

Shoe 75 mm. Dia.

Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. (Ground Floor)

1st floor

2nd floor

3rd floor

Pre-Constructional Anti-termite measures: Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical

Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate

Anti-termite treatment to the outside of foundations with chemical emulsion by admixing chloropyrofos emulsifiable

Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion

Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement

Extra rate for adding Polyester Fibre anti shrinkage material @ 0.25% by weight of cement [or as per Manufacturer's Specification]

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm

Painting block letters or digits in Black Japan or any approved paint as per direction. Size above 10 cm. and upto 12.5 cm.

Size above 15 cm. and upto 20 cm.

Cutting holes and subsequent mending good damages. Diameter exceeding 150 mm. but not exceeding 300 mm. In brick work [Cement-6.0 Kg/Mtr]

R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and ------- etc. necessary reinforcement upto 1% . (JSW/JSPL) 50 mm. Thick panels. (Gr. Floor)

S &P WORKS. Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia.(v) For 100 users. With Pakur variety. (JSW/JSPL)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm. (JSW/JSPL)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 1500 litre capacity

Labour for hoisting plastic water storage tank. 1500 litre capacity

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length. 110 mm

Double Socketed 1.8 Meter Length. 110 mm

Double Socketed 0.60 Meter Length. 110mm

Fittings. Double Y with Door. 110mm

110 X 110 P Trap. 75 mm

Door Bend (T.S.). 110 mm

Vent Cowl. 110 mm

Bend 87.5º. 110 mm

Door Tee. 110 mm

W.C. Connector (450 mm long) W / lipring. 75 mm

Solvent Cement 250 ML

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap. 580 mm X 440 mm

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. Above ground. Single Socketed 3 Meter Length. 110mm.

Double socketed 1.8 Meter Length. 110mm.

Under ground. 110mm

Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth. 150 mm

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position. 450 mm X 300 mm size.

630 mm X 450 mm size

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, 600 mm X 450 mm X 250 mm

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling. 450 mm long.

600 mm long.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling. 900 mm long.

Supplying, fitting and fixing pillar cock of approved make. PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

Supplying, fitting and fixing Waste fittings complete. Polythene. 32 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785. For Exposed Work. 15mm.

40 mm Basin outlet. inlet pipe

Supplying, fitting & fixing Peets valve fullway GM std……..50mm dia

Supplying, fitting and fixing shower of approved brand and make. PTMT overhead shower ( Prayag or equivalent). 150 mm round. 150 mm round.

Supplying, fitting & fixing Aluminium domical grating. 125 mm

Supplying, fitting and fixing bib cock or stop cock. PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. 450 mm X 300 mm

600 mm X 450 mm

Supplying, fitting and fixing towel rail with two brackets. Aluminium. 25 mm dia. and 600 mm long.

BUILDING WORKS. Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but Depth of excavation not exceeding 1,500 mm.

Supplying & fixing 415V 100/125A 4 bar copper sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)

Supplying & Fixing following Four pole MCB on existing wooden board. 400V 63A.

230V 32A, SPMCB

Supplying and fixing 2 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB on existing frame incl. connection & provision for earthing attachment (Make - Legrand / ABB/Schneider/Havells).

Supplying and fixing 240/415 V 32A DPMCB of Breaking capacity 10 KA & "C" characteristics on din rail of existing enclosure and necessary connection. (Make - Legrand / ABB/Schneider/Havells).

Supply & Laying 2x6 Sq.mm copper wire for meter loop (Make: Havells/ Finolex) .

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge 25 mm dia 3 mm thick polythene pipe without earth continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

Supplying and Drawing 1.1 KV 2x84/0.3 (6 Sq.mm) + 1x56/0.3 (4 Sq.mm) as ECC single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

Supplying and fixing 19 mm dia 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction).

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 19 mm dia 3 mm thick polythene pipe without earth continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

Supplying and Drawing 1.1 KV 3x22/0.3 (1.5 Sq.mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (Make: Havells/ Finolex).

Supply & Fixing 2x5A flash type plug socket with switch on 175 x 100 x 65 mm MS board & bakelite top cover complete with all accessories concealed in wall.

Distn. wiring by 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (Avg. run 6 mtrs.)

Distn. wiring in 22/0.3 (1.5 sq. mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (On Board).

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20 A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19 mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5 sq. mm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (For 15 A plug point).

Supplying &

Fixing 100 mm x100 mm x 65 mm sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.

Supply & Fixing 100 mm x 100 mm bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required.

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing angular batten holder (Anchor) on 75 mm dia PVC round block / round bakelite on wall/ceiling.

Supplying and fixing double-door 2+6 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make - Legrand / ABB/Schneider/Havells).

Supplying and fixing 240/415 V 40 A DPMCB Isolator on din rail of existing DBs and necessary connection (Make - Legrand / ABB/Schneider/Havells).

Supplying and fixing 240/415 V 6-32A SPMCB of Breaking capacity 10 KA & "C" characteristics on din rail of existing DBs and necessary connection (Make - Legrand / ABB/Schneider/Havells).

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Excavation of soil for installation of Earth Electrode and filling & ramming in soft soil.

Earthing with 50 mm dia. GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia. GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe.

Equipment earthing by 10 SWG GI wire.

Sub Total