Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.5 LAdmitted-Finance | -27.99% | ₹3.5 L | L1 | Admitted-Finance |
| 2 | L2₹3.6 LAdmitted-Finance 58 1ST FLOOR PATEL NAGAR BATHINDA | BATHINDA | BATHINDA | PUNJAB | -25.95% | ₹3.6 L | L2 | Admitted-Finance |
| 3 | L3₹3.6 LAdmitted-Finance | -25.68% | ₹3.6 L | L3 | Admitted-Finance |
| 4 | L4₹3.6 LAdmitted-Finance | -25.30% | ₹3.6 L | L4 | Admitted-Finance |
| 5 | L5₹3.8 LAdmitted-Finance | -22.94% | ₹3.8 L | L5 | Admitted-Finance |
Tender Value
₹4.9 L
EMD Value
₹9,760
Closing Date
27 Mar 2026, 6:00 pmClosed
AS PER NIT AND TENDER DOCUMENT
AS PER NIT AND TENDER DOCUMENT
Cement Interlocking Tiles with Drain Work From Shree Ram Ke Ghar se Babu Khatik ke Ghar ki aur Nirman Kary Chiksana
2026_CEPWD_548104_1
NIT NO 37/2025-26 EE PWD DIV BHARATPUR
Open Tender
Civil Works
60 days
AS PER NIT AND TENDER DOCUMENT
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
AS PER NIT AND TENDER DOCUMENT
₹9,760
Yes
1 Apr 2026
24 Mar 2026
30 Mar 2026
24 Mar 2026
27 Mar 2026
24 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Clearing and grubbing road land including uprooting rank vegetation, grass, bush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000 m from road boundry as p. By Mechanical Means. In area of light jungle | |||||
| 2 | Providing and laying granular sub-base material having P.I.not more than 6, including compacted thickness and consolidation by 8-10 tonne power roller at OMC to achieve desired density to required camber and grade including cost of water and hire charges of machinery, including T&P and all lead of material from quarry (compacted thickness to be measured). Grading as per MoRTH specification : Grading as per MoRTH specification : Table 400-1, 400-2 with CBR value not less than 30. To achieve 95% Proctor density | 1 | Cum. | - | - |
| 3Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks.Category 'B' : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004 | |||||
| 4Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead as per Technical Specification _____do___________ with lead upto 50 | |||||
| 5 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. | 1 | Cum. | - | - |
| 6Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means. | |||||
| 7Supply of direction and place identification sign boards made out of 2mm thick MS sheet framed to angle iron 40 x 40 x 5mm and 2 vertical posts of angle iron 65 x 65 x 6mm, 4.60m long with hold fasts including excavation and fixing with CC 1:4:8 (30 x 30 x 60cm) and transportation with painting with superior grade enamel paint of approved quality including lettering and figuring etc. complete as per IRC standard size 160 x 180cm (project board) | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.47 MB
Tendernotice_2.pdf
PDF • 9.82 MB
37con.pdf
Tender Documents • 0.93 MB
BOQ_977279.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid