Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.7 LAccepted-Finance BYPASS NH NEAR SBI SIDHRA JAMMU | 1 | Accepted-Finance found eligible | |
| 2 | 2₹7.7 L+₹3,269 (0.43%)Accepted-Finance MAIN ROAD SIDHRA JAMMU | 2 | Accepted-Finance found eligible | |
| 3 | 3₹7.7 L+₹5,821 (0.76%)Accepted-Finance BHAGWATI NAGAR JAMMU | 3 | Accepted-Finance found eligible |
Tender Value
Refer Docs
Closing Date
17 Aug 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer MID Akhnoor/Nowsh
Office of the Executive Engineer MID Akhnoor/Nowsh
Up gradation /Improvement of forced water lubrication system at L.I.S Ranjan.
2022_IFC_180839_1
53/MID/AN
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
45 days
Akhnoor
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Executive Engineer MID Akhnoor/Nowshera
Exempted
Office of the Executive Engineer MID Akhnoor/Nowsh
27 Aug 2022
25 Jul 2022
18 Aug 2022
25 Jul 2022
17 Aug 2022
29 Jul 2022
27 Jul 2022
Providing, assembling, shop and field testing of 3500 GPH x 70 mtrs head submersible pumping unit (01no.) of reputed make and conforming to IS- 8034 with latest amendments/ revision, if any, to be installed in position for pumping of clear water, from 200 mm nominal size bore well at LIS Ranjan. Providing, fabrication, assembling and fitting in position of adapter assembly for the pump of size pump delivery size x 80 mm nominal bore made out of MS pipe to connect pump and column pipe assembly as such externally threaded on pump end and flanged with 80 mm nominal size MS flange on column pipe connection end stiffened with 4 nos. of stiffeners made out of cut to shape 12 mm thick MS flat. Providing, fabrication, assembling and fitting of tie clamp made out of 40mm x 6mm thick MS plate with turn-buckle arrangement to provide required tension in respective tie arms to hold pump assembly along with column pipe well in position inside the bore well. Assembling of pump- motor and shop testing in test pit for all connected parameters. Providing, fabrication and assembling of column pipes 17 nos., each of length 3 mtrs along with make-up piece as per actual requirement at site, made out of medium class GI pipes of nominal bore 80 mm conforming to IS 1239 with latest amendment, if any by way of cutting of pipes to required length followed by end preparation for proper seating of flanges, providing and welding in position of 80 mm nominal bore size MS flanges conforming to IS 6392 with latest amendment/ revision if any, on each end of the pipes stiffened with four no. of stiffeners made out of 12 mm thick MS plate cut to shape with full fillet welding in precise alignment, each flange is to be provided with a rectangular slots to seat/ house flat three core copper submersible cables running along the column pipe assembly. Providing and welding in position of top collar MS flange as per IS code 6392 with latest revisions, if any, of nominal size of 200mm at above ground level end of casing pipe of bore well stiffened with six nos. of stiffeners made out of 12mm thick MS plate cut to shape. Providing and fitting in position of 80mm nominal bore discharge bend flanged on outlet end. Providing , machining & welding in position of top cover flange on inlet end made out of 16 mm Thick MS plate which rests in congruence on top collar flange with its OD, PCD and having ID of 80 mm size as that of NB of bend ,to fix in position by Providing/ fitting of 08 nos. of M16 bolts with nuts. Assembling of pump- motor and adapter with tie clamp as unit and lowering to pump position 50 mtrs BGL , it includes providing/laying of 3 core flat submersible cable 6 mm2 80 mtrs single run along column pipe assembly clamped at regular spacing up to control panel by making connections with the leads of submersible motor with proper water proof insulation, connecting pump assembly to column pipe followed by assembling of each column pipe one by one followed by lowering into bore well along with makeup piece , discharge bend fitted with the help of heavy duty nuts/ bolts and rubber gaskets to ensure water tight joints, to make the pump with column pipe assembly & discharge bend to rest on top collar flange of the casing pipe of the Bore Well and lowering/ installation of pumping unit at specified position inside the well.Complete job includes cost of material, pumping machinery, consumables, labour, transportation, loading, unloading, testing and commissioning.
Providing ,fitting, shop testing, installation at site, testing and Commissioning of wall mounted indoor three phase submersible pumping unit controller/DOL control panel to be installed at Bore Well compatible to work at 415 volts, AC-3 Phase, 50 Hz, M.S body for operation up to 10 HP prime mover of pumping unit. Submersible pumping unit controller/DOL control panel shall comprise of 01 No. of electromagnetic air break power contactors supported with over/ under load protection relay , reverse phasing protection relay, single ,phasing protection relay (SPPR). The PC shall be equipped with 2 Nos. of push buttons for start and stop operation of motor, 3 No. Phase indicator, and meters for reading of real time voltage and current, a neat and clean internal control wiring should be made with flexible copper wire to complete the circuit. The job includes installation of control panel inside the pump hall , making of connections of submersible cable of the pump coming from bore well on outgoing load connection side of DOL Panel and the incoming terminal side of DOL panel is connected to available LT AC electric source by providing and laying position of multi strands copper cable 10 mm sq 10x3 mtrs . Job also includes making of connections using appropriate thimbles, insulations, clamps, nuts /bolts. The DOL Panel should be tested on full load with tripping of starter on running of motor for all the parameters/conditions as specified above .Complete job includes cost of material, components, consumables, labour, transportation, loading, unloading, testing and commissioning.
Excavation of foundation 0 .800 mtrs x .800 x mtrs x 0.500 mtrs at equidistant from centre of the casing pipe of bore well opposite to each other at distance of 1800mm c/c aligned in straight line passing through centre of casing pipe . Fallowed by laying / cast in-situ of PCC foundation in 1:2:4 cement concrete mix with aggregate 40mm size of dimension. 800 mtrs x .800 x mtrs x 0.600 mtrs. Providing, fabrication, assembling and installation in position of over head gantry for lowering/extraction of sub. Pumping unit along with column pipe assembly. Job includes fabrication and erection in position of vertical column 2 Nos made out of ISMB 150 4.5 mtrs long each with base plate made out of 8 mm thick MS Plate of size 350mm x 350 mm welded in position at one end of each ISMBcolumn/vertical coulmn and top bearing plate of same specification at top end of the each vertical column . The base plate and column pipe is to be stiffened by p/f and welding in position of stiffeners made out of 8 mm thick MS Plate of size 300 mm x 100 mm cut to shape (2 Nos., for each) and 300mm x 170 mm cut to shape ( 02 nos for each) . Providing and fitting in position of foundation plates of size 350 mm X 350 mm made out of 8 mm thick MS plate with 4 no of holes for M20 bolts to be fitted in foundation blocks with the help of J hook foundation bolts made out of 20mm MS round bar 650 mm long 75 mm threaded length for M20 nut, embedded in concrete foundation block .The vertical column are to be erected in position on respective foundation plates with the help of double nuts & washer. Main cross member of the gantry is to be fabricated out of ISMB 150 of length 1500 mm with connecting plate welded on each end to be made out of M.S Plate 8 mm thick MS plate of size 350 mm x 350 mm with four no holes for M20 bolts and stiffened with stiffeners made out of 8 mm thick of size 150x270 mm cut to shape(06 Nos at each end). The cross member is to be fitted across the vertical column members well in position with the help of respective connecting plates and M20 Bolts 75mm & nuts maintaining the alignment with the centre of casing pipe. Providing and welding in position of angle iron section of size 50x50x6 mm thick & 500 mm long each (9nos) at spacing of 500 mm C/C along the vertical column as ladder approach to cross member. Providing and fitting in position of 03 ton capacity and 06 mtrs lift chain pulley block conforming to IS 3832 with latest amendment if any on the cross member for handling of the pumping machinery along with sling made out of 16 mm size steel wire rope with U-clamps to withstand the load of sub. Pumping unit along with column pipes. Providing and fabrication of two nos of pipe clamp sets made out of 16 mm thick MS plate with bolts & Nuts for handling of 80 mm dia pipe , Complete job includes cost of material, labour, transportation, loading, unloading, testing and commissioning.
Providing and fitting in position of 80mm Nominal size vertical seating Reflux valve of capacity 1.6 PN conforming to relevant BIS code at upstream end of discharge bend of column pipe assembly of submersible Pumping unit . Providing and fitting in position of flanged T joints 80mm dia on upstream end of the NRV, fitted with blind flange of thickness 8mm with the help of nuts/ bolts and rubber gasket . The blind flange is to be fitted with 1/2inch nominal size elbow at its centre with heavy duty ball valve. Dismantling of existing MS pipe line and reconditioning of the same for removal of blockage, if any. Laying in position and realignment of 80mm NB MS pipe for connecting discharge bend of submersible pump with lubricating pipe system/junction inside the pumping station. The job include cutting of pipe to required size as per site condition followed by providing / welding in position of new flanges of appropriate size 13 no. at respective place / position for flanged connection pipe line through a length of approx 30meter including straight portion and bends as well of dia 80mm connecting to the existing lubrication system inside the pumping station Providing and fitting in position of 3 nos of flanged bends of size 80mm NB on the pipe line as per requirement of site condition. The flanged joints are to be provided with nut –bolt and rubber gasket to ensure water tight joints. It include erection in position of clamps /supports fabricated out of suitable structural steel section / PCC supports to hold the delivery pipe line well in position as per actual site conditions. Complete job includes cost of material, labour, transportation, loading, unloading, testing and commissioning as required at site
Providing and fitting in position of heavy duty 20mm nominal bore size GI pipe , 0.5 mtr, & 1.0 mtrs in length for respective lubrication lines including heavy duty fittings(sockets , unions, elbows) and ball valve for Stuffing Box & shaft enclosing tubes for each pump. The job include reconditioning of stuffing box and shaft enclosing tube lubrication ports to accommodate the forced water lubricating inlet nozzles properly. Erection in position and testing of the system on full load as well as on no load for all connected parameters. It includes, loading, unloading and handling of material, material, and consumables, labour charges, transportation & hire charges of tools & tackles, testing & commissioning complete job.
Providing and fitting in position of heavy duty 20mm nominal bore size GI pipe 24 mtrs in length of respective lubrication line including heavy duty fittings(sockets , unions, elbows, nipples of size 20mm/12mm as applicable ) and ball valve for lubrication of each stage of 20 cusec discharge x 61 mtrs head three stage VT pump . The job includes extraction of VT pump from its position 22 mtrs below ground level. Reconditioning of three stage VT pump lubrication ports to accommodate the forced water lubricating inlet nozzles properly. Making of lubrication point connection for all the three stages of pump. Followed by assembling of pump & column pipes 500 mm dia, line shaft 70 mm dia with its enclosing tubes 200 mm dia one by one and lowering the pump to its position along with extending the lubrication line along the column assembly using appropriate fittings, providing and fitting of relevant joining material nuts , bolts , washers , fitting , tightening and after complete alignment . Testing of the system on full load as well as on no load for all connected parameters. It includes, loading, unloading and handling of material, material, and consumables, labour charges, transportation & hire charges of tools & tackles, testing & commissioning complete job.
M/S TRIKUTA ELECTRICAL AND MECHNICAL WORKS
BEE AAR ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .