Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹7.8 L+₹483 (0.06%)Rejected-AOC | L2 | Rejected-AOC REJECT |
Tender Value
₹10.3 L
EMD Value
₹10,250
Closing Date
23 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner, Coimbatore Corporation
Coimbatore Corporation, Main Office, Big bazaar street, Town hall, Coimbatore-1
Improvement works to Urban Health Wellness center UHWC in sowdambika nagar in ward no. 34 West Zone
2023_MAWS_390078_22
e78/2023
Open Tender
Civil Works
Works
150 days
Coimbatore
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹10,250
26 Apr 2024
20 Nov 2023
24 Nov 2023
20 Nov 2023
23 Nov 2023
20 Nov 2023
Amount
1. Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (SO0V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete SD 131
Supply and fixing 16amps DP switch with metal clad(Side handle)of 500 V with F & N on suitable teak wood board of size 30cmx20cmx6cm including necessary internal connection, earth connection etc complete (SD 142)
3. Supply and run off 2 of 4 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to 1S:694/1990 with continious earth connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to 1$:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 57)
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed fan point (for electronic regulator) SD 24
4 ways 3 phase DB no of ways incomer MCB/isolator -4no of ways incomer ELCB/RCD -4NO OF OUTFOINGS WAYS -12 Wpwd sor 2021-2022 PG.NO.136 SI.NO.16.1.a
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with doubledoor(metal) 1 no.32A DP MCB as incoming and 6 nos 6A to 32 A spmcb OUTGOING IN FLUSH WITH WALL AND MAKING FOOD OF THEconcelaed portion with earth connection only. The MCB DB and MCB's should be with ISImark(like standard make)(SD 167)
Supply and fixing of 32A TPNMC switch with suitable angle iron frame work with MS cable entry boxed with earth connection only (SD 164)
Supply and laying of 5/8'' and 3/8'' copper pipe (Extra beyond 3 metres supplied with AC unit) (pwd sor pg.no: 143)
9. Wiring with 2x1.5sqmm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC accessories in flush with wall including the cost of cable, pvc pipe and specials, ceiling rose, flush type Sams SP mark switch, PVC “unction box, 16gauge MS switch box 100mm x 100mm x 75mm covered by laminated hylem sheet 3mm thick, cement, labour and making good of concealed portion with suitable colour for concealed PVC LIGHT point. (SD 24)
supply and fixing of 18W LED 3000K square type resessed fitting (philips/havells)complete with T.W. rouund blocks on wall or ceiling with flu tube with PVC unsheather copper leads from terminals to the filling (SL.NO 16)ELECTRICAL SOR
Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW roundblocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting (SD 87)
Supply and fixing of 1200mm (48'')sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps (SD 110)
Supply and fixing of WT bulk head fitting with guard (philips/bajaj/cromption/K-Lite)suitable for 11W CFL (SD 83)
Supply of water supply pipes and specials with approved brand
110mm dia PVC pipe 10KCS
63MM dia PVC pipe 6 KCS
20MM dia UPVC pipe
25mm dia UPVC pipe
20mm dia UPVC Coupling
25mm dia UPVC Coupling
20mm dia UPVC Elbow
25mm dia UPVC Elbow
20mm dia UPVC Bend
25mm dia UPVC Bend
110mm dia UPVC Elbow
20mm dia UPVC Tee
25mm dia UPVC Tee
110mm dia PVC Tee
Applying wall putty of two coats and making smooth by using emarisheet including cost of conveyance of all material to the work site and labour charges etc complete
Paiting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, rmeoval of dust and including necessary plaster of paris putty works wherever required etc., completed
Daddoing the walls with first quality approved color galzed tiles with printed design of 150x150x6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40kg/1m2 including finsihing the jointing and painting flush with tiles surface etc., complete 10m2
Flooring with scratch proof ceramic tiles of approved quality and color of size 305x305x6mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointed with same color cement added
19. Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three-sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification
20.European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings
21.Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with Smm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter,
22.UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/Imm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work PWD SOR Pg. No. 71 SI.No.261
23.UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/Imm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. Thewindow should be got approved from the Executive Engineer before use on work (PWD SOR 2020-2021, P.No 71, SI.No 247)
24.Supplying and fixing of 1000 lits HDPE Water Tanks with suitable specials including cost of materials to site and all other labour charges.etc
25.Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of !.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
M.Rajendran
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .