REPAIR/MAINT TO E/M INSTALLATIONS, POLE AND PANEL PAINTINGS AND CONNECTED WORKS AT MIL STN TALBEHAT

Amount

Supply and fixing cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed inclusive of one primer coat, one under coat and one finishing coat of paint. complete all as specified and directed.

Supply and fixing framed work as in doors or gates of angle made out of FE 410-W Gde E-250 quality -A or other section with gusset plates, rails, fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing inclusive of one primer coat, one under coat and one finishing coat of paint. complete all as specified and directed.

M&L including fabrication of existing panel cover with hing, nut and bolt with two coat painting complete all as specified and directed.

M&L in repair aluminium conductors steel reinforced (ACSR conforming to IS : 398) Part-II)-1976 for HT/LT over head lines on steel poles including Aluminium binding wire complete all as specified of existing size copmlete all as specified and directed.

Material and labour for GI wire 4mm dia (8 SWG) stretching and fixing on pole for continious earth conductor, Guard wire 3.2 mm (10 SWG) for cradle (Hexagonal/rectangular) including binding wire all as specified and directed.

S&F pin type polymer/porcelain, vitreous, white, brown or green insulator including Galvanised Mild Steel spindle, two Galvanised iron washers and one GI nut 100 mm height , 65 mm dia suitable for 1100 Volt working pressure grade (LT) complete all as specified and directed.

S&F shackle type polymer/porcelain, vitreous, white, brown or green insulator including Galvanised Mild Steel straps, washers, suitable bolts, washers and nuts of size 100 mm height, 115 mm dia for 1100 volts working pressure grade complete all as specified and directed.

Supply, jointing and testing outdoor type heat shrinkable End termination cable joint including all material and accessories suitable for 3 core x 50 -95 Sqmm earthed XLPE cable of 11000 Volts grade all as per manufacturer’s recommendations complete all as specified and directed.

S&F in repair Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed.

S&F in repair Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed.

Supply and fixing pin type polymer/porcelain vitreous white or brown or green insulators of size 150 mm height and 150 mm dia for 11 KV grade and on galvanised mild steel spindle, two GI washers and one No GI nut complete confirming to the latest IS complete all as specified and directed.

Supply and fixing disc type insulator polymer/porcelain, vitreous white, brown or green of size 145 mm high and 255 mm dia ball and socket type with clamps suitable for single disc assembly for tension with tension clamps for ACSR conductor working pressure of 11000 volts complete all as specified and directed.

M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundation of PCC poles/ struts, etc. including form work complete all as specified and directed

M & L for plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation of stay assy/ pole etc, including form work complete in all as specified and directed

M & L for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate for coping/plinth of poles, including necessary form work finished even & smooth without using extra cement all as specified and directed

M & L for repairing and servicing two/four pole structures comprising of following works :- (a) Dismantling the ACSR jumper connection from Air break Gang operated drop out fuse end lightening arrestors etc from the two/four poles structures, replacing the complete jumpers in to new with ACSR conductors including connecting with suitable thimbles connections/binding/PG clamps and providing monoplast compound over binding/thimble connections b) Removing the complete rusted bolts, nuts and washers and replacing with new bolts, nuts and washers (c) Disconnecting the AB switch knives cleaning and servicing by lubricating the moving parts terminals with petroleum jelly. (d) Cleaning the exposed surfaces of two pole structure complete and painting with two coats of synthetic enamel aluminium paint all as specified and directed by Engr-in-Charge

M & L for painting of two structures of steel/rail/steel tubular pole in E/M installation complete including all cross arms, clamps etc with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height with 2 coats of synthetic enameled paint including preparation of old surfaces complete all as directed.

M & L for painting of three structures of steel/rail/steel tubular pole in E/M installation complete including all cross arms, clamps etc with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height with 2 coats of synthetic enameled paint including preparation of old surfaces complete all as directed.

M & L for painting of four structures of steel/rail/steel tubular pole in E/M installation complete including all cross arms, clamps etc with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height with 2 coats of synthetic enameled paint including preparation of old surfaces complete all as directed.

M & L for painting of tubular pole (Cross arms, clamps etc) with 2 coats of aluminium paints and including preparation of surfaces and painting upto the height upto 9 m pole with 2 coats of synthetic enameled paint including preparation of old surfaces and making colour bands and rewriting the pole number complete all as directed.

M&L for cutting of vegetation surrounding transformer, two poles, four pole structure at various sub station / E&M installation and remove to a distance not exc 50 mtr all as directed.

Cutting /trimming of tree branches upto 80 mm girth along LT/HT OH electric lines which or growing /touching or falling on ACSR conductor /poles or near by sub stns etc at any height from GL and making sufficient clearance not less than 1.5 mtr from ACSR conductor/ poles/ structure and taking down the same on the ground carefully avoiding the damage of and removing to a distance including stretching of conductor as required where directed by Engr - in -charge. Note :- Tree cutting will be maintain for periodisity for three months depending upon the grouwth of three branches.

Re-Streaching of Aluminium reainforced condutor by opening from insulators and refixed with streached complete all as specified and directed.

M&L LT line PVC spacers spiral type for two/three/four line (separator) complete all as specfied and directed.

Supply and Laying and spreading of 40mm graded stone aggregate complete all as specified and directed.

Supply, fixing and testing high prfomance LED street Light fittings of 90 Watts, energy saving and environment friendly long life pressue die- cast aluminium hosing high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP-66 Protection and impact resistance of IK07 with 10 KV Built in Surge Protection Device suitable for pole dia 54mm complete all as specified and directed MAKE : Havells/Philips Crompton/Halonex

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

HARNAM SINGH ANIL SINGH (BID ID -3334436)

m/s gupta trading (BID ID -3334989)

M/S SHIVA TRADERS (BID ID -3335009)

M/S Kharya Associates (BID ID -3334810)

PRATAP CONSTRUCTION (BID ID -3334284)