Ayotheethas 2024-2025

Amount

Earthwork excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales,murram, ordinary earth, earth mixed with 50% fair sized boulders etc., with initial lead and lifts including laying, sprading, levelling sectioning breaking clods etc., incuding all incidential changes complete as per standard specification for foundation SS 20B

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification

R.R. Masonary in CM 1:5 mix using rough stone including cost and conveyance of all materials to site with all leads of pure water for curing and all labour charges and all other incidental charges etc complete

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90X60cm & 10 gauge stiffened, welded with steel angle of size 25 X25 X 3mm for boarding laid over silver oak joists (Country wood) of size 10X6.5cm spaced @ about90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2. for the following items. (RCC floor slab, roof slab, Rectangular / square, Tee / Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.,)

a)Beam and column

b)Plain surface

RCC 1:11/2:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering, Centering and cost of Reinforcement grills but including curing, finishing etc completed

BRICK WORK in cement mortar 1:5 (One cement and five sand) using best quality of country bricks of size 8 3/4 "X 4 1/4" X 2 3/4" for the following including curing etc., complete complying with standard specifications.

Supply and fabrication of steel and placing in positon TMT steel grills for RCC works as per design given including cost of steel and GI binding wire in floors etc., complete with standard specification

SPECIAL PLASTERING and finfishing all the RCC exposed surface such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (One cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standarad specification.

PLASTERING walls with cement mortar 1:4 (One cement and four sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges etc. complete.

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

P.C.C 1:1.5:3 mix (One part of Cement, 1.5 part of Sand and three part of Aggregate) using 20mm HBG ISS metal including all cost and conveyance of materials to site and all labour charges etc, complete.

Drilling of 150mm dia deep bore well in hard rock area to required depth including cost and all labour charges and all other incidental charges etc complete.

Supply and Fixing of 180mm OD 10KSC PVC Pipe for casing Pipe for Medium depth in to drilled bore well.

Supply and delivery submersible pump set with ISI mark IS 8034/2002 20lpm x 90m head including all cost and conveyance of materials to site and all labour charges etc, complete.

Supply and delivery of fully automatic 2.00 HP air break auto tranforrmer panel board with single phasing preventory with ammeter voltmeter with auto restart facility including all cost and conveyance of materials to site and all labour charges etc, complete.2HP PB

Supply and Delevery of 1000 Litre capacity HOPE Tank with ISI mark including cost and conveyance of all materials etc. complete.

Supply of Steel Door to (1.00*2.00)m size including cost and all labour charges and all other incidental charges etc complete.

Painting the new walls in two coats with Emulsion paint of approved colour and quality over one coat of primer including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers

Painting with extrier emulsion Paint Two coats with approved colour including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc complete

Painting in two coats with Ready mixed Enamel paint for New steel work including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheetcover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for makinggood of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD 23

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable SD 38PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mmTW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush typeswitch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion withsuitable colour for concealed PVC plug point

Supplying and delivery of PVC Insulated and sheathed 2.5 Sq mm 3 core Flat type copper cable confirming to IS 694 /1990 including cost of materials etc., complete

Gurusamy (BID ID -1120909)