Loading
Loading…
Loading…
Tender Value
₹41.0 L
EMD Value
₹82,100
Closing Date
19 Aug 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
SIGNAL
20 conditions · 9 needing a document upload
PAN card Copy should be enclosed.
Please submit the copy of the registration certificate as applicable, GSTIN certificate should be enclosed.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should go through Annexure 1 & 2 of Tender Notice (attached in Tender Document)for list of documents required to be uploaded along with the offer.
Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only payment modes available ON IREPS portal LIKE net banking, debit card, credit card etc.Manual payments through Demand draft, Banker cheque, Deposit receipts, FDR etc. are not allowed.
Copy of PAN number and GSTIN number should be submitted.
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenders shall be treated as NULL & Void.
(i)Tenderers will examine various provisions of the Central Goods and Service Tax Act, 2017(CGST)/Integrated Goods and Service Tax Act,2017(IGST)/Union Territory Goods and Service Tax Act,2017(UTGST)/respective states State Goods and Service Tax Act(SGST) also, as notified by Central/States Govt. and as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit(ITC) likely to be availed by them is duly considered while quoting rates. (ii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the contractor. The contractor shall be responsible for deposition of applicable GST to the concerned authority. (iii) In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism(RCM) and deposit the same to the concerned authority.
Preparation of Integrated Cable Route Plan i.c.w Doubling work in MBDP-JNH section of Lucknow Division of Northern Railway
106-Sig-Tender-28-2026-27
106-Sig-Tender-28-2026-27
Open
Works - General
180 Days
Lucknow, Uttar Pradesh
₹0
₹82,100
19 Aug 2026
29 Jul 2026
5 Aug 2026
3 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 41,02,192.25 | ||
| — | 73.81 | — | — | ||
| Programming and Geo Tagging by taking latitude& Longitude by using GNSS receiver Integrated locator or similar in existing S&T cable route with digital mapping through mobile application. Provision of soft and hard copy of digital route plan, Geo-tagging data along with Railway track to cable distance on digital mapping for the section considering the following:(i) Survey of existing underground cable using latest technology equipment like cable route tracer and having RTK based Geo- tagging facility using RTK catalyst correction service capturing depth and location of underground cables with GNSS coordinates with accuracy& capturing distance of cable from fixed structure/nearest track.(with depth range up to 9mtrs., GNSS coordinates acquired with up to 5 cms location accuracy and generally within 30 cms range with final accuracy depending upon weather and interference conditions. Preparation of such cable route plan using suitable software tools with surround Image Upload facility at each point . Report will show location, depth of cables and distance from fixed structures , Cable route Name, Cable Type, Cable Size , GPS Error(Preferably 5cm to 30cmof better), Photos etc. Data to be handed over to Railway after survey are:(a) Soft copy/coordinates acquired as per Railway requirement in suitable USB. (b) Hard copy of cable route showing depth, location(coordinates), distance from fixed structures legends Like OHE Poles, LC Gate , Culvert in 1tracing & 2 copies of final paper print and (c) Cable route data acquired will be additionally maintained on a cloud secure server for upto 3years from the date of data acquisition as backup, in case Railway require copies of same shall be provided . (ii)S&T cable route locating by Geo-tagging per route KM of trench for S&T cable etc. Data output should be mapped provided on .kml format with integrated depth data of cables mapped. (iii) Equipment utilised should have utility mapping software used on mobile phone (Mobile phone with utility mapped software should take data via Bluetooth from both cable locator and RTK/GNSS receiver with auto correction service simultaneously. (iv)Additional map required with cable distance from nearest track to be included and provided as hard copy map with GPS coordinates and Depth of cable mentioned. Cable joint locations to be indicated in route map. (v) Separate color code to be used for different trenches for S&T cable, if applicable. (vi) In route map Geo tagging may be placed at an interval of 20mtrs. for approx. straight path, and 1 point adjacent to OHE poles. For track crossing, diversions, culverts this may be less as per site requirement. (vii) Data output to be provided in USB & hard copy prints. The GIS mapping shall be carried out using equipment of Make/Model: STANLAY, RYCOM, Pathfinder PLDL, 3M or better. Details of equipment utilised should be as per specifications attached with special conditions of work as Annexure-3 or better. Training on Geo-tagging of cable route to be included. After completing the GIS mapping work, the contractor shall handover 1 GIS Mapping Kit to the Railways. Inspection: Consignee for Supply item | — | — | — | 41,02,192.25 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_1_1.pdf
ATTACHMENT
ACSGCC22-231to6.pdf
ATTACHMENT
GCCACS11_compressed_1.pdf GCC correction ACS 11
ATTACHMENT
27ProvisionofICRPMBDP-
ATTACHMENT
GCC correction ACS 7 to 10
ATTACHMENT
GCCAdvanceCorrectionSlipno7-10.pdf
ATTACHMENT
GCCACS11_compressed_1.pdf
ATTACHMENT
TD-28-2026-27ProvisionofICRPMBDP-JNHSectionFinal.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .