PROVN OF FLOOR TILING IN BLDG NO 87/1 87/2 AND 02 QTRS IN 112 BLOCK AT PINE WALK AND RENOVATION OF 2 X TOILET IN BLDG NO 53/1 AND 2 X TOILET IN BLDG NO MES 53/2 AT SHILLONG CANTT AND PROVN OF CHAIN LINK FENCING (APPROX 75 RM ) WITH MS POST NEAR MES

Amount

AGE B/R SCHEDULE PART - I Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and as directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M & L 25mm thick PCC 1:-2:4 type B0 (12.5 mm graded stone aggregate as in subfloors complete all as specified and as directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles nexc 0.36 sqm in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

All as Per Item no 06 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specified and as directed.

M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

Taking down chowkat or frame not exc 1.5 Sqm (without taking off shutter from the frame) complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 18mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite exc 15mm nexc 5mm wide complete all as specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item 21 above , but for 20mm dia (Bore) complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified and as directed. make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag

S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware

S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware

S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag

S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&Fin repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera

S&F in repairs 15mm bore Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed in repairs complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed.

S&F Gl frame snap grid for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

M&L for Aluminium handle, cast type anodised of size 150mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and as directed.

S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and as directed.

Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil complete all as specified and as directed.

M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and as directed.

M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc., and similar work conforming to Fe-290 Gde E-165 complete, all as specified .

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

M &L for MS work for screws bolts (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 cm and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-In-Charge

M&L for Round bars/TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

S&F Galvanised 2 strand steel barbed wire, 2.24 mm, barbed with 2.00 mm dia barbs at spoacing 75 mm and straining and fixing to any type of strandard rails straining bolts, incl securing or tying at crossing with provn of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L plain fillets square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm all as specified.

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi?nium framework with screwsGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

S&F Venetian blinds of wooden finished material width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 1.00 sqmin floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing complete all as specified and as directed.

M&L for acoustic door of 56 mm achiecing sound reduction upto 50mm STC. Double layes of 8mm waterproof acoustic ply with dampner sheet and double layer of 10mm compressed insulation and single layer of sound dampner sheet and double and double layer of 10mm compressed insulation and single layer of sound damper 1218 x 1218 mm x 12mm made of 10mm compressed wood fiber cement composite 1250 kg/m3 and 2mm damper sheet having 37 STC as per ISO 140 (part-III)-1995). Door frame will be made of teak wood (sudan teak). Three side frame and drop seal below will be provided alongwith the door with high load bearing hinges. complete all as specified and as directed.

M&L in repair Fibrette tiles of wood fiber cement composite 1mm width wood fiber 20/25 mm thick of size 600 x 600/600 x 1200mm having excellent nosie absorption of 1 NRC as per ISO : 354, density 400 kg/m3, meets fire ratings as per BS 476 part5,6 and 7 class 1 and p, water resistant and thermal insulated. Installed on GI studs 600x 600mm center to center 2400 mm x 50mm web thickness 0.5mm flanges 15 & 50mm fully knurled giving it high strength, hot dipped galavnized steel with 120 GSM thick absorb wool tested as per fire retardant IS 15061-2002 for excellent results complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exceeding 1.50m wide and not exceeding 1.5 in depth for foundation etc and getting out as in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate as in haunching, benching, rounded or chamfered on edges or in lintels upto 1.5 clear span,cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing, upto 60cm in height, copings, kneeler, apex stones, bed plates, kerbs not provided, water troghs and the like including weatering, slightly rounded or chamfered angle and throating complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and directed.

M&L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as drains all as specified.

M&L for Formwork to sides of concrete fdns,drains, footings, bases of cols, raft and fafts beams, sides and soffits (if any) of fdns and plinth beams, and similar works and fair finished surface complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F of Stainless steel Grab Bar, (Cosmo care 304 Grade) wall mounted safety straight grab bar for bathroom/toilet (10 inch length) complete all as specified and directed.

AGE E/M SCHEDULE PART -II Supply and fixing LED flood light 60 Watt , Green pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed.

Supply and fix in repair LED Bollard Lights including connection with three core flexible copper cable complete all as specified and directed

Supply and fixing Flexiable cable 6 Sqmm Weather proof single flat twin core cable including pvc pipe 20 mm complete all as specified and directed

Returning ,fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick.

Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from strting point.

Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specified and as directed.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 2 core , confirming to IS specifications complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga

Description all as per Srl item No. 99 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.99 above in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 99 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings

S & F LED down lighter fitting warm white /white type with lamp 18 Watt complete with necessary connectioncomplete all as specified and as directed.

S & F Slim desingn LED recessed square PLUTO NEO 2X 2, 28 watt flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified make- Philips full glow high efficiency complete all as specified and as directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric , hot and cold water pipe, tab etc and water connection and testing after installation. Make : Havells cat part no - GHWASEIBO25 /LG/Ronald.

Supply and fixing LED security Building light LED 35 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete.Make Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one complete all as specified and as directed.

M & L for sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M/S T N CONSTRUCTION

M/S U.K ENTERPRISE