WELCOME MAINT AND REPAIR REPLACEMENT OF BRICK WORKS FLOORING JOINERY LEAKEGE SEEPAGE HARDSTANDING ROOF SHEETS FALSE CEILING LEAKAGE SEEPAGE INTERNAL EXTERNAL PLASTERING SANITARY FITTINGS AND CERTAIN MISC B AND R AND INTERNAL EM WORKS AT AF STN NAREL

Amount

B&R WORKS: M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper on walls complete all as specified and as directed.

All as per item No. 1 above but on surfaces of ceiling.

All as per item No. 1 above but applying two coats of Cement base paint on walls complete all as specified and directed

M&L for Complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coat of Weather Exterior Emulsion paint complete all as specified and as directed.

M&L for providing 1-2mm thick wall care putty on wall before applying Oil bound distemper and making the surface uniform all as specified and directed.

M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for complete all as specified and as directed

M&L for Providing 100 mm thick PCC (cement concrete) 1:2:4, type B-2 (using 40 mm graded aggregates) as in hardstanding/ ramp /path etc Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green Complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed.

M&L for 40mm thick cement concrete type B-1:2:4 (20mm graded aggregate) as in flooring finished even and smooth without using extra cement complete all as specified & as directed.

M&L for 25 mm thick PCC 1 :2 :4 type B-0 (using 12.50mm graded stone aggregate) as in sub base floor complete all as specified & as directed.

M&L for Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for bedding of tiles complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on vertical surfaces for backing of tiles complete all as specifed and directed

M&L for non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirting etc, set and jointed in neat cement sluury and pointed in white or coloured cement to match complete all as spd and directed

M&L for Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 7mm/450x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and directed

Taking down existing unserviceable water proofing treatment from roof slab including plaster and cleaning the roof slab by wire brush and removing the debries and WPT felt beyond the premises of MD land complete all as specified and directed

M&L for 15 mm thick plaster in cement mortar (1:3) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed . Notes : WPC shall be measured and paid seperately

Supply only Water Proofing Compound complete all as specified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete as all specified and as directed.

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster without aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer's instructions of APP modified membrane sheet complete all as spd and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan to any radius in half brick works, built in cement mortar 1:4 etc complete all as specified.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick plastering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as spd & directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of Oil Bound distemper over one coat of primer complete all as specified & directed.

M&L for rendering 10mm thick in cement mortar 1:3 as in ceilings finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of Ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity 3 layers (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified.

S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

All as per item No. 43 here-in-before but exc 1.5 Sqm but not exc 4 Sqm each complete all as specified.

Taking down chowkhats or frames not exc. 1.5 sq. m each complete all as specified and directed.

All as per item No.45 here-in-before but exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm and removing from site complete all as specified and directed

Taking down shutter of any description n.exc 1 Sqm and removing from site complete all as specified and directed

S&F 105X60mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 125X60mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified.

S&F factory made 35mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified.

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series Ashish Industries(Note : Glass and wiremesh shall be measured and paid separately under respective items)

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section. Complete all as specified and as directed

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section. Complete all as specified and as directed

S&F 100 mm size extruded aluminium alloy handles cast type anodised and fixed complete all as specified and directed

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1 mtr width opening complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Dismantling boarding of any description , fixed in any position with nails complete all as specified.

S&F PVC 18 mm thick decorative lamination board of density 600kg/CBM manufactured by an ISO:9001-2005 certifed with termite proof, water proof & flame retardant PVC Sheet. complete fixed with each other using solvent cement adhesive and stainless steel screws & including required handle, panels shall be fabricated using adhesive and screws and all the edges shall be covered with bonding tape and finished as per manufacturer instruction and all as specified.

S&F Auto soft closed hinge for PVC laminated board complete all as specifed and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified.

S&F as in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed.

Hacking out old broken glass ordinary quality or description from wooden or metal frames glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 4mm thick ordinary quality and glazing fixed with including neopune rubber gasket complete all as specified and directed.

S&F in repair fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified.

S&F pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed.

S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified.

S&F in repair Corner glass shelf (with bracket) , fancy type with stainless steel railing fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair fancy type central hole basin mixer without PUW with 450 mm flexible hose copper alloy with capstan heads CP screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified.

S&F in repair chromium plated health faucet telephonic type with 8mm dia, 1 meter long CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified.

S&F in repair soap dish, brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified.

S&F in repair toilet paper holder ,brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified.

S&F in repair 200 mm dia towel ring ,brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified.

S&F in repair towel Rack 600 mm with hanger ,brass, chromium plated,, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repairs 900 x 800 x 260 mm plate rank of stainless steel with steel shelves make out of 0.7 mm thick steel sheet and hanging arrangement for utensil including taking down existing complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified.

S&F in repair PVC (SWR) bends any radius 110mm bore complete all as specified.

S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified.

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint fixed to wall complete all as specified.

Dismantling posts or struts (wood, steel, or RCC) any section, incl taking out embedded portion and making good disturbed ground posts embedded in concrete brick work masonry etc complete all as specified.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, etc., drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and as directed by Engr-in-Charge (each row shall be measured separately)

M&L for excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft and loose soil complete all as specified.

M&L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work etc complete all as specified and as directed

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc comlete all as specified and as directed.

S&F in repair re-inforced punched concertina coil of 600mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified and as directed.

S&F 11 to 15 mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length exc 5 cm and n exc 10 cm long all as specified.

Dismantling fencing wire mesh, any type complete all as specified.

Fixing only chain link fencing including line , any mesh size and type , straining bolts, etc including provision of binding wire.

Supply only MS galvinised chain link fencing any size and any type wieght of 4.0 Kg per Sqm complete all as specified.

M&L for Mild Steel round bar 10 dia and over cut to length bent to shape required, including cranking, bending spirally for hooping ends complete all as specified & directed.

Supply and fixing 75 mm thick SFRC (1.00X0.50)m manhole cover/drain cover and frame (heavy duty HD-20 Gde designed), total Weight of cover and frame to be not less than 180 Kg etc complete all as specified and as direted.

S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified.

Taking down of aluminium frame/doors/windows from site dismantling aluminium structure such as glass, rubber beading aluminium clips complete all as specified & directed.

S&F powder coated anodized aluminum partition, frame for doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm long hinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified & directed.

S&F powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No Tower bolt 100 mm 1 No complete all as specified & directed.

M&L for 5.50 mm thick sheet glass ordinary quality and glazing each pane fixed with including neopune rubber gasket in aluminium frame work complete all as specified and directed.

S&F 9 mm thick prelaminated particle board exterior grade in bottom panel of Aluminium door including rubber gasket, aluminium glazing clips complete all as specified and directed.

S&F fabricated anodized aluminium grill of size 75x100mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and as directed .

S&F in repair Mortice lock, vertical type of brass 100 mm 4 Levers with duplicate keys complete all as specified.

S&F in repair aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc Complete all as specified.

M & L for clip in type armed strong metallic powder coated 0.5mm thick ceiling with GI framework made of standard Tee , Angle or any other section as in grid type ceiling framework as approved by GE . Ceiling shall be hanged to roof trusses / purlin rafters with the help of GI wire not less than 4mm dia at an interval n. exc 1m , the size of the metallic powder coated ceiling tiles 600 mm x 600 mm complete all as specified.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings Complete all as specified.

S&F Pre-painting galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall fixed with self tapping screws complete all as specified.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified.

S&F Plates ( plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified.

S&F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

E/M WORKS Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

M & L for replacement of concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-

One light / fan point controlled by one way switch

One 5 Amp socket outlet on independent board.

One 5 Amp socket outlet on same board.

All as per above item No 136 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.

S&F ceiling rose, surface backelite 65x50mm two to three terminals complete all as specified and as directed.

S&F switch Piano flush type single pole one way 5 Amp complete all specified and as directed.

S&F switch Piano flush type single pole one way 15 Amp complete all specified and as directed.

S&F socket out let 3/5 pin, 5. Amp piano flush type complete all specified and as directed.

S&F socket out let 6 pin, 5/15 Amp 230 volts piano flush type complete all specified and as directed.

S&F bell push, piano type, single pole complete all specified and as directed.

S&F stepped type electronic fan regulator rotary flush socket type 230 volts 450 watt complete all as specified and as directed.

S&F electric bell, AC 230 volt, single pole, complete all specified and as directed.

S&F MCB DB Sheet metal enclosure single pole and neutral 240 volt 2 way in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 complete all as specified and directed by Engr-in-charge.

S&F MCB DB sheet enclosure single pole and neutral 240 volt 8 way with 200 Amp rated Bus bar common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way complete all as specified and directed by Engr-in-charge.

S&F in replacement MCB, single pole, 240 Volts (06 to 32) Amps,10 KA 'B' Curve complete all as specified and directed by Engr-in-charge.

S&F in replacement MCB, single pole & neutral, 240 Volts 40 to 63 Amps,10Ka 'C' Curve complete all as specified and directed by Engr-in-charge.

S&F in replacement MCB, single pole & neutral, 240 Volts 32 Amps,10 Ka 'C' Curve complete all as specified and directed by Engr-in-charge.

S&F LED light fitting 1x10 watt surface mounted with accessories connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm complete all as specified and directed by Engr-in-charge.

S&F LED light fitting 1x20 watt surface mounted with accessories connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm complete all as specified and directed by Engr-in-charge.

M&L for sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire, drawn through PVC surface/ concealed conduit and connected to main board and making good disturbed surface including taking down out old unserviceable sub main wiring and removing deberis to reinstate the premise neat and clean complete all as specified and as directed. Note: (i) Two run each of one RM of 10.00 sqmm cable and 1 run of one RM of 6.00 sqmm cable together shall be considered as 1 running meter for payment purpose.

Supply and fixing in replacement ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed by Engr-in-charge.

S&F in replacement Exhaust fan metal body 380mm sweep with louver including making opening for fixing exhaust fan and making good to the disturbed surface and making connections from E/fan to Ceiling rose. complete all as directed by Engr-in-charge , Make:- Khaitan, Bajaj, Crompton.

Supply and fix in replacement electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. complete all as directed by Engr-in-charge

Taking down of MCB DB 2/ 8 way/12way with MCB 's and making good of wall complete all as specified and directed by Engr-in-charge.

Taking down of MCB SP / DP complete all as specified and directed by Engr-in-charge.

Taking down of ceiling / exhaust fan / Geyser all as specified and directed by Engr-in-charge.

Taking down of existing sub main wiring any size complete all as specified and directed by Engr-in-charge.

JAIPAL and BROS

B S R Enterprises