i) Procurement of 200 kv transformer for augmentation of existing 100 kv sub station into 200 kv station near hospital Dawar A ii) Procurement of 200 kv transformer for augmentation of existing 100 kv sub station into 200 kv sub station at Mastan Daw

Amount

SITC of below mentioned materials for Procurement of 200 kv transformer for augmentation of existing 100 kv sub station into 200 kv station near hospital Dawar A (Bid cost of the items should be less than Estimated cost of Rs 6Lacs)

11/0.433kV, 200 kVA 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2,Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate with LV Bimetallic terminal connection suitable for vertical take off of cable.

11 kV Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

240mm² single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Fuse set on8NO 10kV Post Insulatoes with direct link of 8x5mm Al flat for Neutral along woth clamps and thimbles

Sundry items like Aluminium lugs, Jumpers, Binding Tape etc

GI Mukhi Clamps for Shackle Insulators (50x6mm)with nuts and bolt

16 kN Polymer Shackle Insulators

Cement bottoming 1:2:4 mix as per Standards 0.5cum /pole

Painting of Poles with Red Oxide and Aluminium Paint

9 Mtr. Long Pole,(ST-410 SP33)

8 Mtr. Long Pole ST-410 SP15

GI Mukhi Clamps for Shackle Insulators (50x6mm)with nuts and bolt

Danger Plates With clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe/rod 40 mm 3 mtr long through GI Strip 25x3 mm

Cement bottoming 1:2:4 mix as per Standards 0.45cum/pole

ACSR 50sqmm

SITC of below mentioned materials for Procurement of 200 kv transformer for augmentation of existing 100 kv sub station into 200 kv sub station at Mastan Dawar B (Bid cost of the items should be less than Estimated cost of Rs 3.79Lacs)

11/0.433kV, 200 kVA 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2,Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate with LV Bimetallic terminal connection suitable for vertical take off of cable.

240mm² single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

GI Channel/Angle/Flat of sizes including clamps

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

LT Fuse set on8NO 10kV Post Insulatoes with direct link of 8x5mm Al flat for Neutral along woth clamps and thimbles

SITC of below mentioned materials for Installation of 2 No. (63 KV) transformers for Panchayat Halqa Shahpora Bala (Bid cost of the items should be less than Estimated cost of Rs 6Lacs)

11/0.433kV, 63kVA 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate with LV Bimetallic terminal connection suitable for vertical take off of cable.

11 kV Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120 mm² single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Fuse set on8NO 10kV Post Insulatoes with direct link of 8x5mm Al flat for Neutral along woth clamps and thimbles

Sundry items like Aluminium lugs, Jumpers, Binding Tape etc

Cement bottoming 1:2:4 mix as per Standards 0.5cum /pole

Painting of Poles with Red Oxide and Aluminium Paint

9 Mtr. Long Pole,(ST-410 SP33)

Danger Plates With clamps

Anti-Climbing Device with Clamps

SITC of below mentioned materials for Creation of 63 KVA transformer along with HT/LT at Fort Mohalla Markoot under District Capex 2024-25 (Bid cost of the items should be less than Estimated cost of Rs 4Lacs)

11/0.433kV, 63kVA 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate with LV Bimetallic terminal connection suitable for vertical take off of cable.

11 kV Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

120 mm² single core Cable,1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Fuse set on8NO 10kV Post Insulatoes with direct link of 8x5mm Al flat for Neutral along woth clamps and thimbles

Sundry items like Aluminium lugs, Jumpers, Binding Tape etc

Cement bottoming 1:2:4 mix as per Standards 0.5cum /pole

Painting of Poles with Red Oxide and Aluminium Paint

9 Mtr. Long Pole,(ST-410 SP33)

Danger Plates With clamps

Anti-Climbing Device with Clamps

16 kN Polymer Shackle Insulators

8 Mtr. Long Pole ST-410 SP15

GI Mukhi Clamps for Shackle Insulators (50x6mm)with nuts and bolt

Earthing Complete by GI Pipe/rod 40 mm 3 mtr long through GI Strip 25x3 mm

Cement bottoming 1:2:4 mix as per Standards 0.45cum/pole

ACSR 50sqmm

peerzada sameer ahsan shah (BID ID -2343623)

M/S BHAT ELECTRICALS (BID ID -2344352)

DAR ELECTRICALS (BID ID -2344248)

M/S BARKAT ELECTRICALS (BID ID -2344338)