Construction of New Residential Quarters for Revenue Department at Majra Piau in Sub division Narnaund in Distt. Hisar (Pdg. E.I Internal only).

Amount

Main Switches: Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . Double pole switch 32 amp. 415 Volts Cat-B.

Triple pole switch with neutral link 32 amp. 415 Volts Cat-B.

Triple pole switch with neutral link 63 amp. 415 Volts Cat-B.

Triple pole switch with neutral link 100 amp. 415 Volts Cat-A

Supply & erection of MS angle iron frame duly welded for housing MS sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm

M.S.Sheet . Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distribution board with plug and socket. Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp.

Blanking sheet . Supply and erection of blanking sheet in existing distribution board.

Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB 6 amp. To 32 amp

SPN MCB of 6 amp. To 32 amp.

TPN MCB 6 amp. to 32 amp.

TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. Call bell 220/230 Volt A.C. Bakelite with double coil.

Bell push flush type ( without flexible wire ) in existing sheet.

Bakielite angle/ straight button holder large size

Switch 5 amp. On existing sheet.

Wall socket 5 amp. On existing sheet.

Supply and erection of hexegonal M.S. box 1.60 mm thick having each side 8 cms, 7.5 cms deep, top covered with M.S. lid by means of screws including 10mm dia 30cm long mild steel rod made into suitable suspension hook and erected in R.C.C. slab for erection of fan, the bottom covered with 3mm thick bakelite sheet with suitable holes, painting etc. complete with all labour and material required to complete the job.

Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjacent point.

Erection and carriage of fans. Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station/Goods transport/PWD store to the site of work

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick

Providing and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep

Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

Galvanized iron flexible pipe complete with socket nipples and check nuts etc. at both ends ( upto length of 1 meter.) Size 20 mm dia.

Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Miscellaneous . Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of Bakelite sheet.

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. Fan Point Medium Point

Long Point

Light Point Short Point

Medium Point

Long Point

Call bell point including MS box of size 180mmx 60 mm deep for call bell. Long point

Twin Control Light point with 2 way, 5 amp. Single pole switch Long Point

3 pin 5 amp. Plug point including earthing the 3rd pin etc. Short Point

Long point

3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. Long point

S/E of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. Cable size 1.5 sqm(3/0.81 mm)

Cable size 4 sqm(7/0.85 mm)

Cable size 6 sqm(7/1.05 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. 8-way, SP&N (Horizontal)

12-way, SP&N (Horizontal)

4-way,TP&N (Horizontal)(8+12)

12-way,TP&N (Horizontal)(8+36)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. 25mm dia

S/E of MS box of size of 200mmX150mmX100 mm deep covered with Bakelite sheet including cost and flushed erection of 32 A DP switch, 15A socket and switch with necessary connections complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Deluxe model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. upto the entire satisfaction of the Engineer-in-Charge of the work.

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. 10 amp. 1 way switch

10 amp. 2 way switch

20 amp. switch

10 amp. Socket

16 amp. Socket

Bell Push

Fan Regulator

Call bell Ding-Dong (Monica)

Blanking plate.

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect 1 & 2 Modules

3 Modules

4 Modules

6 Modules

8 Modules

12 Modules

Supply & Erection of MS box size 8 x 10 x 4 (20cm x 25cm) and 10 cm deep made one of 1.6mm thick MS covered with 5 mm thick bakelite sheet for fixing of 4 No. socket and switch of 6 amp. And one No. socket and switch of 15 amp. Including fixing of one No. fuse unit and indicator of approved make. The MS box required to complete the Job in all respect with ocst of necessary cement sand and mixture required to complete the job in all respect with cost of necessary labour charges for fixing he backlight sheet and complete then job in all respect upto the entire satisfaction of Engineer-in-Charge of work.

Supply installation commissioning and testing factory made panel outdoor type for meter board for 8 meter and control switch gear. Floor mounted totally enclosed cubical type with modular copartmentlised dust and vermin proof with peoprine gasket fabricated out CRC sheet of thickness not less than 2 mm complete with steel metal clad bus bar chamber having openable hinged front shutter including powder coating (shade Simens Grey) internally and externally the entire stell surface complete with the following space for incomer MCCBs energy meter & MCB etc switch gears. Bus Bar, Internal wiring( Power and Control) wiht following provision with size of panel 1350 X 1800 x 250 mm.