Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC 0 KALIKAPUR KALIKA PUR CHAMPAHATI SOUTH 24 PARGANAS WEST BENGAL 743330 | 24 PARAGANAS SOUTH | WEST BENGAL | 743330 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹48.6 L+₹1.1 L (2.32%)Rejected-Finance 165 UTTAR KASTODANGA ROAD KOLKATA 700 061 | KOLKATA | KOLKATA | WEST BENGAL | 700061 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹48.9 L+₹1.4 L (2.91%)Rejected-Finance 8 28 BIJOYGARH P O JADAVPUR KOLKATA 700 032 | KOLKATA | WEST BENGAL | 700032 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹49.3 L+₹1.8 L (3.73%)Rejected-Finance 72 A ABINASH CHANDRA BANERJEE LANE KOLKATA 700010 | KOLKATA | WEST BENGAL | 700010 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹49.5 L+₹1.9 L (4.06%)Rejected-Finance 6 NALAPUKUR LANE FLAT 2C SENHATI COLONY KOLKATA 700034 WEST BENGAL | KOLKATA | WEST BENGAL | 700034 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
14 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
ADDN/ ALTN TO BLDG NO T-689 AND T-626, SEWAGE LINE AND PLINTH PROTECTION ALONGWITH CONNECTED B/R WK AT BLDG NO KP-08 AND PROVN OF 02 X TOILETS AND 01 X BATHROOM AT 497 INT AND FS UNIT AND 01 X BATHROOM IN BLDG NO P-160 AT KLP LOC OF ECIB UNDER GE
2023_MES_610328_1
8162/E8
Open Tender
Civil Works
Item Rate
120 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹88,000
11 Oct 2023
24 Jul 2023
16 Aug 2023
24 Jul 2023
14 Aug 2023
7 Aug 2023
Amount
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles, all as specified and as directed by the Engineer-in-Charge.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties etc complete all as specified and directed.
Dismantling plain or corrugated steel sheets as in roof coverings including ridge complete all as directed.
Surface Excavation not exc 30 Cm deep and averaging 15 Cm deep and getting out in soft/loose soils, complete all as specified and as directed.
Rough excavation not exc 1.5 m deep and getting out in soft/loose soils, complete all as specified and as directed.
Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified
Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavation in post holes each not exc 0.5 Cum getting out returning filling in and removing earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance not exc 50m and making good surface as in soft / loose soils, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
Removing excavated materials exc 250m, but not exc 500 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
M&L for PCC (1:3:6) type C-2, by using 40 mm graded stone aggregate as in foundations, fillings and mass-concrete, complete all as specified and directed.
M&L for PCC (1:2:4) type B-2, by using 40 mm graded stone aggregate as in foundations, fillings and mass-concrete, complete all as specified and directed.
M&L Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L Brick Work with fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.
M&L for rendering 15 mm thick built in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid separately).
Supply only liquid water proofing compound all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 10mm thick cement plaster on ceiling surfaces finishing even and smooth without using extra cement in cement mortar (1:3) including necessary scaffolding complete all as specified and directed.
M&L 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L for glass dividing strips 3mm thick, 38mm width of strip inserted in position, confirm to design in concrete floor, complete all as directed by the Engr-in-Charge.
M&L 100 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in flooring/ hardstandings, finished even and fair without using extra cement, complete all as specified and directed by the Engr-in-Charge.
M&L 100 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in flooring/ hardstandings, finished even and fair without using extra cement, complete all as specified and directed by the Engr-in-Charge.
M&L 100 mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in flooring/ hardstandings, finished even and fair without using extra cement, complete all as specified and directed by the Engr-in-Charge.
M&L 25 mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base flooring, finished even and fair without using extra cement, complete all as specified and directed by the Engr-in-Charge.
S&F Vitrified coloured (Dark shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.
All as per item No 31 here-in-before, but as in skirting on vertical surfaces, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed..
S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.
All as per item No 33 here-in-before, but as in skirting on vertical surfaces, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed..
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 350x250x 7mm / 450x 300 x 7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L for granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.
M&L for pre-polished Chequered cement concrete tiles (coloured) of size 40cmx40cmx25mm thick , set, jointed and pointed in neat cement slurry in floor and pointed with white / coloured cement & pigment to match the surface laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for pre-polished Chequered cement concrete tiles (coloured) of size 30cmx30cmx25mm thick , set, jointed and pointed in neat cement slurry in floor and pointed with white / coloured cement & pigment to match the surface laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and n exceeding 4.00 Sqm each and removing from the site complete all as specified and directed.
S&F Aluminium anodised Powder coated for doors, windows, ventilators and partition with one or more rebate (minimum thickness of powder coating 50 micron) and three track with 1.8 mm thick channel section and shutter frame thickness 1.65mm, without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. Notes: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be measured separately.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100 mm long (2 No) suitable handles etc. complete all as specified.
Supply and fix steel ventilator with frame, top hung shutters including hinges, steel peg stay, complete all as specified and directed.
S&F 4.8 mm thick sheet glass, ordinary quality, glazing with cleats, glazing clips, rubber neoprene packing etc, in squares exceeding 0.5 sqm in each pane complete all as specified and directed.
M&L for 18mm thick Pre laminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with rubber packing, anodised aluminium snap beading, screws etc., to aluminium partition wall frame work, complete all as specified and directed.
M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed.
S&F Factory made solid PVC door frame (chowkhat) of size 50 mm x 47mm made out of 5mm plain colour PVC sheet, frame reinforced with MS square tube, fixed in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.
M&L for Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
S&F Butt Hinges medium weight cold rolled stainless steel 125mm long complete all as specified.
S&F Butt Hinges medium weight cold rolled stainless steel 100mm long complete all as specified.
S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed.
S&F Aluminium anodised bow handle fabricated type extruded section of 150mm long complete all as directed
S&F Aluminium anodised bow handle fabricated type extruded section of 125mm long complete all as directed
S&F Aluminium anodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
Supply and fixing Mortice lock vertical type (chrome) 100mm, 6 levers as in repair complete all as specified and as directed. (Make : Godrej Model No- 8194 or equivalent model in other approved makes )
Supply and fixed in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.
Supply and fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheed foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for uprooting of tree from walls of bldgs up to extended root and spraying of muratic acid of required quantity complete from any location of bldg, up to four storey height and making good disturbed surface with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20 mm graded stone aggregate etc complete all as specified and directed.
M&L RCC (nominal mix) (1:1½:3), type A-1 (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid separately)
M&L for M-25 nominal mix RCC (1:1½:3), type A-1 (using 20mm graded stone aggregate) as inslabs, supported on walls, beams and columns, in floors, roof landings, balconies, canopies, deck slabs and shelves etc., complete all as specified and as directed.
M&L for mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.
M&L for mild steel TMT Bars 6-8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.
M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed .
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for fair finished surfaces complete all as specified and directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railing, openings in concrete walls, floors, roofs and similar work; not exceeding 200 mm wide and sides of RCC/PCC bands in walls (horizontal or sloping), exc 10cm wide and but n exc 20cm wide, for fair finished surfaces, complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings, complete all as specified and directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured Galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile Galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile Galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
All as per Item No. 77 above, but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.
M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE-410-W (Gde E-250) complete all as specified and directed.
M&L for Rolled mild steel ornamental and intricate framed work, Fe 410W (Gde E-250) quality A, as in grills, gratings, doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 12 n. exc 20 dia of neck and exc 10cm but n exc 15cm long, complete all as specified and directed.
S&F 1mm thick plain galvavised mild steel sheeting in ridges, hips, factory made valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, joints are soldered etc., complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified.
S&F False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on powder coated aluminium snap grid to support the boards/files with powder coated aluminium anodised main 'T' section 36mm x 25mm x 1.40mm, cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)
M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper finished with rollers over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and directed.
M&L for preparation of surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on new plastered surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and soffit of chajja, roof slab etc., by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., including necessary safety & protective measures such as safety belt, headgear etc., finishing the surfaces and applying two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make and necessary scaffolding for upto 4 Story building height, complete all as specified and directed by Engineer -in-Charge.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L Preparing new Steel or Iron Surfaces of any description, not exc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint over a coat of pink primer on old wood or wood based surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
Taking up or down 15mm bore GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.
Relaying/Re-fixing 15mm bore Galvanised Steel Tubing and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush, fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the following size of pipes :-
15mm bore outer dia
20mm bore outer dia
25mm bore outer dia
40mm bore outer dia
S&F Gun metal gate valve as per IS : 778-84 Class-1 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repairs, complete as all specified and as directed for the following size of pipes :-
40 mm bore
25 mm bore
20 mm bore
Cutting existing steel tubing for alteration or additions of 40/50 mm bore of pipe and re-fixing the suitable Tee 50x50x50mm / 40x50x40mm dia, complete all as specified and directed.
Disconnecting exiting water storage Tank of capacity exceeding 250 litres but not exceeding 500 liters and re-moving to stores, complete all as specified and directed.
Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank and writing CA No & Year with synthetic enamel paint complete all as specified and directed.
S&F 25 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-153 or equivalent model in JEXON / POLYTUF / SHAKTI)
S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Cat No: OPS-WHT-15853S300UF / PARRYWARE, Model: Omega / HINDWARE, Model: SPELNDOUR)
S&F in repair Vitreous China Wash Hand Basin 550mm x 400mm in size, white, Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR/ASIAN PAINTS, Model: SIRIUS) (NOTE: Quoted rate shall be deemed to be inclusive of the cost of brackets, waste coupling and waste pipe)
S&F Vitreous China table top Wash Basin 565 x 425 mm in size, White with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. (MAKE : JAQUAR, Cat No: KUS-WHT-35935 / CERA, Model: CHEST / HINDWARE, Cat No. 91069 or equivalent model in PARRYWARE)
S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, cat No: BEA-26)
S&F Chromium plated brass Wall mixer (premium quality), concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : KUP-35125PM /CERA, Cat No: F2004403 / PRAYAG, Cat No: 9880 /HINDWARE, Cat No: F360019 or equivalent model in PARRYWARE) NOTE: Telephone shower shall be measured and paid separately.
S&F fancy type chromium plated telephonic hand shower (premium quality), multiflow type with flexible tube 1.5m long and hook screwed for iron pipe including frame complete all as specified and directed. (Make : JAQUAR, Cat No: HSH-CHR-1739 / CERA, Cat No: CG425 / HINDWARE, Cat No: F160047 / PRAYAG, Cat No: BHS-87 or equivalent model in PARRYWARE)
S&F 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : JAQUAR, Cat No: KUP-35011BPM / CERA, Cat No : F9050452 / HINDWARE, Cat No: F360011/ PRAYAG, Cat No: 9851 or equivalent model in PARRYWARE)
S&F 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: FLR-5083NK & ALD-083 /ESS ESS, Cat No: TM-332 & E221 / CERA, Model: F200351 & F4050102 / PARRYWARE, Cat No : G0651A1 & G5052A1 / PRAYAG, Cat No: 9318 & CPS-15/ HINDWARE, Cat No: F280027 & F850096)
S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: KUP-35053PM / PARRYWARE, Cat No: T3097A1 / CERA, Cat No: F1005201 / PRAYAG, Cat No: 9410 / HINDWARE, Cat No: 320006 )
S&F Tubular towel rail (normal range), 20mm dia, 600 mm long between flanges including brass chromium plated, as in repairs, complete all as specified and directed. (MAKE : Essco, Cat No : AEC-1111 / PRAYAG, CaT No: BA-40 / ESS ESS, Cat No : AC-701 / SOMANY, Model: ETHER)
S&F Low density polythelene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end, as in repairs, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 / ESS ESS, Cat No: B2CH118 or equivalent model in SHAKTI / JEXON)
S&F Chromium plated brass self closing pillar tap (premium quality), fancy type. with aerator, fixed to wash hand basin, as in repairs, complete all as specified and directed. (Make : JAQUAR, Cat No: OPP-15001PM / CERA, Cat No: F1005101/ HINDWARE, Cat No: F360001 / PRAYAG, Cat No: 8102 or equivalent model in PARRYWARE)
S&F Low density polythelene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end, as in repairs, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004 / ESS ESS, Cat No: B2CH119 or equivalent model in SHAKTI / JEXON)
S&F Chromium plated brass Bib cock with wall flange, fancy type, fixed to 15 mm bore of Iron pipe, as in repairs, complete all as specified and directed. (Make : Ess Ess, Cat No: RB-103 / PRAYAG, Cat No: 6706 / Essco, Cat No: SQT-512KN / / /SOMANY, Model: ETHER)
S&F Chromium plated brass over head shower rose with arm, with 3 flow, fixed to 15mm bore of iron pipe, as in repairs, complete all as specified and directed. (Make : Essco, Cat No: ALE-536A & EOS-542N / ESS ESS, Cat No: SA-101 & OH-202 / PRAYAG, Cat No: BS-73 / SOMANY, Model: ETHER)
S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : ACN-1131N / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-703 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)
S&F in repair corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102/ ESS ESS, Cat No: AC-207A)
S&F stop valve cast copper alloy, ISI marked, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or union for pipe 20mm bore complete all as specified and directed.
S&F in repair Cast iron work grade FG 150, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles (weight n exc 5 kg each) complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
Supply and fixing 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing 110 mm PVC (SWR) Bend any radius complete all as specified and as directed by the Engineer-in-charge.
Supply and Fixing 110 mm PVC (SWR) junction single (Single T) equal or unequal, complete all as specified and as directed by the Engineer-in-charge.
Supply and Fixing 110 mm PVC (SWR) Vent cowl any radius complete all as specified and as directed by the Engineer-in-charge.
M&L for 100 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.
S&F Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed.
S&F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified, fixed on walls complete all as specified and directed.
Supply and fixing 100 mm bore cast iron (sand cast) bends with access door (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed by the Engineer-in-Charge.
S&F CI bend (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.
S&F CI (sand cast) Branch pieces, single (any radius, equal or unequal) for 100 mm bore pipe for any building height complete all as specified and directed.
Supply and laying 150 mm bore reinforced concrete pipe of Class NP-2, laid and jointed with jute & cement mortar 1:1, complete with collars all specified and as directed.
M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 150 mm bore pipes complete all as specified and directed.
S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab of size 600 mm x 450 mm x 75 mm thick, of Capacity 3 MT fixed in proper position complete as directed by Engr-in -Charge.
SCHEDULE 'A' PART-II (INTERNAL ELECTRIFICATION) Supply, installation testing and commissioning of Split AC units indoor/outdoor complete with cordless remote control with inbuilt air ioniser and plasma filter for better indoor air quality, minimum 5 star rating, copper condenser, copper coil and EER 3.2 of capacity 1.5 TR including 2.5 Sqmm 4 core flex copper cable connection from indoor to outdoor unit as per site requirement and refrigerant line copper tubing of suitable sizes including foam insulation upto 5m long, 2 Nos powder coated angle iron bracket, nuts, bolts etc for AC outdoor unit including making holes of required dia on walls and necessary masonry work for making good distributed surface and match with the existing colour complete all as specified. "Make: Daikin/ Hitachi/ O-General " Note:- Copper pipe, insulation and connecting cable, angle iron bracket shall be measured and paid separately under respective item.
Supply and fixing refrigerant line suction copper tubing of size 5/8" with clamping on wall surface or concealed with both ends connections complete all as specified and directed. (NOTE: Measurement shall be taken for pipes beyond the standard length of pipe supplied with AC)
All as per item No.134.00 above, but discharge copper tubing of size 3/8". (NOTE: Measurement shall be taken for pipes beyond the standard length of pipe supplied with AC)
Supply and fix discharge copper pipe line heavy duty 1/4" dia and flair nuts from indoor to outdoor unit of split AC 1.5 TR/ 2 TR capacity all as specified and directed.
S&F nitrite rubber insulation for copper tubing of dia 5/8" complete all as specified and directed.
S&F nitrite rubber insulation for copper tubing of dia 3/8" complete all as specified and directed.
S&F nitrite rubber insulation for copper tubing of dia 1/4" complete all as specified and directed.
S&F drain pipe 5/8" dia PVC jacketed heavy duty with fixing of clamp complete all as specified and directed.
Supply and fix PVC pipe nylon imbraided 15 mm dia for condenser water drain fitted with clamps/ concealed in wall all as specified and directed.
S&F powder coated metallic stand (02 nos) for fixing outdoor units of Split Type Acs of 1.5/2.0 TR capacity complete all as specified and directed.
S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250 V with out put voltage stabilized at 230 Volts with accuracy if + 2.5% and of capacity 4.0 KVA, complete all as specified and directed.
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and incl PVC conduit complete with all fittings and accessories (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for One light point or one fan point or bell point controlled by one switch or bell push complete all as specified and directed. (NOTE :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be exclusive of the cost of terminal box & laminate cover which shall be measured seperately. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including galvanised mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
All as per item No. 145.00 above, but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No.145.00 above, but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No. 145.00 above, but using 2.5 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No. 145.00 above, but using 4.0 Sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for Split type AC point controlled by one switch on independent board with and incl 4.0 Sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).
S&F switch piano flush button AC 230 V Single pole 5/6 Amp one way complete all as specified and directed.
S&F socket outlet, non-shuttered, 2-in-1, 3 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.
S&F switch socket combination, 5 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.
S&F switch piano flush button AC 230 V Single pole 15/16 Amp one way complete all as specified and directed.
S&F socket outlet, non-shuttered, 2-in-1, 3 pin, 6 Amps and 16 Amp AC 230 Volts flush type complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type universal complete with all necessary electrical connection all as specified and directed.
S&F Modular Switch 1 way, 6 Amps, 1 module complete all as specified and directed.
S & F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.
S&F Modular White cover plate with frame 4 module complete all as specified and directed.
S&F Modular White cover plate with frame 6 module complete all as specified and directed.
S&F Modular White cover plate with frame 8 module complete all as specified and directed.
S & F Modular type Metal Flush box 4 module complete all as specified and directed.
S & F Modular type Metal Flush box 6 module complete all as specified and directed.
S & F Modular type Metal Flush box 8 module complete all as specified and directed.
S&F ceiling rose surface, polycarbonate/bakelite, three terminals complete all as specified and directed.
Supply and Hanging, ceiling fan, with brushless DC motor, 1200 mm sweep, BLDC 5 Star rated with five years warranty (with / without remote), down rod, canopy, fan blades and accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan including dismantling existing fan complete all as specified and directed. (MAKE : HALONIX, Model: PLASMA BLDC/ CROMPTON, Model : EENERGION GOOVE /BAJAJ, Model: SKU-251100-Emergps 28W 1200mm CF / ORIENT, Model: HECTOR 500 / HAVELLS, Model: Efficiencia Neo/ USHA, Model No.ENERGIA) NOTES: (i) Old fan, if any taken down, shall be deposited by contractor in MES store yard. (ii) The vender shall be provided with marking / embossing toll free No duly indicating the guarantee/warrantee period on the every fan. (iii) The tenderer shall be marked/inscribed the MES / SM No on fan with synthetic enamel paint (Black colour)
Supply and fixing ventilating fan, 300 mm sweep, made of sturdy engineered plastic with louver shutter, 230 Volts, 50 Hz, connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose to fan complete all as specified and directed. (MAKE : HAVELLS, Model : Venti Air DX / CROMPTON, Model : Brisk Air / USHA, Model: CRISP AIR or equivalent model in BAJAJ / ORIENT / POLAR)
S&F surface mounted decorative box type LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with Acrylic/ polycarbonate diffuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation
S&F Ceiling / wall mounted focus zoom light LED luminaire, 1 X 24 Watt offers the most potent solution for indoor focused lifhting requirements, beam angle 36 degree, tilt 90 degree, operating voltage 180-270 V, complete with all accessories, internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed. (Make Crompton Cat part No.LCSRRA-24-CDL or Equivalent model, makes specified in the tender)
S&F LED Bldg Security Light fitting 35/36 Watts, in pressure die cast aluminium housing with PMMA lens and toughened glass/PC cover having TOP opening separate driver compartment, with integrated constant current electronic driver, incl providing new GI pipe bracket as per existing size including necessary electrical connection with suitable size copper wire complete all as specified and directed and complying with the following specifications:-. (a) minimum efficacy 110 lumen/watt (b) CRI not less than 70, (c) THD < 30% (c) having in built short circuit & surge protection upto 5 kV (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Weather protection grade: IP66
S&F Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed.
S&F MCB 'C' series, SPN, 40 Amps, breaking capacity 10KA, 240Volts, complete all as specified and directed.
S&F MCB 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA, 240Volts, complete all as specified and directed.
S&F MODULAR MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed. (MAKE : HAVELLS, Cat No. DHDUCDP0253025 / NORTH WEST, Cat No: ACPU6M-BT or equivalent model in ABB / C&S / CRABTREE / HAGER / SCHNEIDER / LEGRAND) (NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)
M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 Sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 Sqmm as earth continuity conductor drawn through and including concealed PVC conduit of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 4.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
Supply, Laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable of size 10 Sqmm, 2 Core, 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole incl necessary aluminium thimbles, jointing and testing complete all as directed. (Note :- If earth work required at site shall be measured and paid separately.
Supply, installation, testing and commissioning of heater water storage type electric geyser (vertical cilyndrical type) 25 ltrs capacity with BEE 5 star rating (min) and ABS body, porcelain enamel glass lined inner tank incl fixing arrangement with providing incl suitable capacity flexible cable 3 core with 3 pin plug of 16 amp complete all as specified and directed. (Make: Havells, Model: Monza Turbo / RACOLD, Model - CDR / AO SMITH, Model- HSE-VAS or equivalent model in CROMPTON / BAJAJ)
Supply only chromium plated copper pipe 15 mm dia, length not less than 45 cm including PVC washers for incoming and outgoing hot and cold water incl all necessary fitting materials complete all as specified and directed.
M&L for GI Pipe Bracket made out of Galvanised Iron Tubing 32/40mm bore (dia), light grade, 1.50 Metre long, cutting as required and bend to shapee, fixed with 02 sets of flat iron clamp of size 25mm x 5 mm, with bolts, nuts and washers of suitable size including applying two coats of aluminium paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed by the Engr-in-Charge.
MS AP CONSTRUTION AND CO
DEB AND COMPANY
MS HORIZEN
Somani Builders
JAGATMATA ENTERPRISE
UNIVERSAL TRADING CENTRE
M A ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .