Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.7 L+₹20,005 (1.29%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹18.5 L+₹3.0 L (19.7%)Rejected-Finance H NO 257 1ST FLOOR KAMALA NEHRU NAGAR BATHINDA PB | BATHINDA | BATHINDA | PUNJAB | L3 | Rejected-Finance Other than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) Bhisiana
GE(AF) Bhisiana PIN-151201
As per BOQ/ Price Schedule
2023_MES_623734_1
GE/BHI/T-15/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE(AF) Bhisiana
As per NIT/ Tender documents
6 documents required · 6 mandatory
₹500
GE(AF) Bhisiana
₹40,000
18 Dec 2023
17 Oct 2023
16 Nov 2023
17 Oct 2023
14 Nov 2023
1 Nov 2023
17 Oct 2023 - 28 Oct 2023
Amount
Taking down Chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer in Charge.
Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each complete all as specified and directed by Engineer in Charge.
Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed by Engineer in Charge.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed of size 125 X 60mm complete all as specified and directed by Engineer in Charge.
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directed of size 105 X 60mm, complete all as specified and directed by Engineer in Charge.
S&F for Rolled Mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting Plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) F3e-410-W (Gde E-250) Quality A including two coat of synthetic Enamel paint over a coat of Red Oxide Primer and dismantling of existing Steel structure of any description, complete all as specified and directed by Engineer in Charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed by Engineer in Charge.
S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and as directed by Engineer in Charge.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing sheet, complete all as specified and directed by Engineer in charge.
S&F 100mm size stainless steel handles suitable to fix in Kitchen cabinet, complete all as specified and as directed by Engineer in Charge.
S&F Stainless steel magnetic catcher of size 40 to 60mm for cupboards complete as as specified and as directed by Engr-in-Charge.
S&F factory made 2nd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer in Charge.
S&F factory made glazed and skelton shutter IInd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and including glazing 3 mm thick and fixing wire cloth complete all as specified and as directed by Engineer in Charge.
S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all as specified and as directed by Engineer in Charge.
S&F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer in Charge.
S&F 150mm Aluminium handles, fabricated type complete all as specified and as directed by Engineer in Charge.
S&F in repair 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engineer in Charge.
S&F 100mm long hasp and staple safety type aluminium powder coated with mild steel pin including bolt to hinge plate and fix with screws complete as per specified and as directed by Engr-in-Charge.
S&F mild steel 150mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F in repair mild steel 150mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S&F floor door stopper of size 140mm of aluminium ally body and tongue, anodised, with hard drawn steel spring fixed in floors.
S&F stainless steel ball bearing runners of 45mm telescopic channel (20 inch) full extention load capacity 50 kgs complete all as specified and directed by Engineer in Charge.
S&F in repairs coats hooks of six pegs made out of stainless steel 45cm long ( as sample approved by GE), complete all as specified as directed by Engineer in Charge.
S&F box type steel windows glazed & gauged factory made MS square/rectangular ERW Hollow pipe of gauge 18 with side hung shutters including box type hinges with steel handle and steel peg stay, and including stainless steel wire cloth 1.14mm dia and 4mm thick glass fixing with putty and glazed pins and including 8mm or 10mm dia square bar at equal spacing n.exc 150mm c/c grills and guard bar including preparation & applying two coats of Synthetic enamel paint over a coat of red oxide complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with existing surface and including taking down old existing window with frame complete all as specified and as directed by Engineer in Charge.
Taking down shutter of any description not exc. 1.00 Sqm and not exc 2.00 Sqm Each and Refixing in Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and as directed.
M&L applying Two coats of Synthetic enamel paint over a coat of factory made primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed by Engineer in Charge.
Supply and fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete all as specified and as directed by Engineer in Charge.
S&F of anodised aluminium window and Ventilator shutters, fixed type without sash bar aluminium sections weighing 0.55 kg/M including necessary joining cleats , glazing clips, rubber neoprene packing, hinges anodised aluminium snap beading screws etc,complete all as specified and directed by Engineer in Charge.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and as directed by Engineer in Charge.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge.
S&F figured glass 4mm thick , pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane, complete all as specified and as directed by Engineer in Charge.
S&F of auto closing hinges 50 to 75 mm openable at 0 degree for kitchen cabinet shutters, complete all as specified and as directed by Engineer in Charge.
Dismantling boarding of any description including hardware fittings ,fixed in any position with nails etc complete.
S&F 18mm thick PVC ply of plain colour fixed with screws, solvent cement / adhesive to make kitchen cabinet sides, top, bottom and shelves inside the cabinets complete as per specified and as directed by Engr-in-Charge.
S&F 18mm thick PVC ply of one side prelam/rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete as per specified and as directed by Engr-in-Charge.
S&F 5mm thick PVC ply of plain white colour fixed with screws, solvent cement / adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specified and as directed by Engr-in-Charge.
S&F of continous piano hinges stainless steel , bright finish width of flaps when open 40mm complete as per specified and as directed by Engr-in-Charge.
GUPTA AND ENGINEERS
SUBHASH ARORA CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .