Interior Fit-Out works in the office space of Convergence Energy Services Limited CESL, 9th Floor, LIC Building, Connaught Place, New Delhi

GENERAL ABSTRACT OF COST

Name of Work : INTERIOR/ FURNISHING WORK OF CESL, LIC BUILDING, NEW DELHI.

Sub Head No. Description DSR NDSR/MR Total

CHAPTER-2 CLADDING WORK 13,883.00 424,937.83 438,820.83

CHAPTER-3 DOOR & WINDOW WORK 1,197,515.00 101,460.35 1,298,975.35

CHAPTER-5 CEILING WORKS 515,204.00 915,748.90 1,430,952.90

CHAPTER-6 WALL FINSHES WORK 1,329,206.65 4,899,294.62 6,228,501.27

CHAPTER-7 REPAIRS TO BUILDING 107,352.00 0.00 107,352.00

CHAPTER-8 METAL WORK 29,069.00 0.00 29,069.00

CHAPTER-9 WATER PROOFING 11,107.00 0.00 11,107.00

CHAPTER-10 FURNITURE WORK 0.00 9,045,076.93 9,045,076.93

CHAPTER-11 PLUMBING WORK 90,123.00 186,840.00 276,963.00

CHAPTER-12 ELECTRICAL WORK 2,500,841.25 4,152,051.89 6,652,893.14

CHAPTER-14 UPS System Work 0.00 1,553,765.00 1,553,765.00

CHAPTER-15 Audio And Vedio System (AV) 7,096,540.00 7,096,540.00

CHAPTER-16 Active And Passive 4,013,931.00 4,013,931.00

CHAPTER-18 FIRE ALARM SYSTEM 770,967.00 398,708.00 1,169,675.00

CHAPTER-19 FIRE FIGHTING 23,452.20 164,715.80 188,168.00

CHAPTER-21 Access Control 57,000.00 517,385.00 574,385.00

Total value including GST 49,819,258.00

Digitally signed by AMIT

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF ESL, NEW DELHI

ABSTRACT OF COST

NAME OF WORK -INTERIOR AND FINISHING WORK

I.NO DSR CODE DESCRIPTION UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

SH 1 CIVIL WORK

1 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and cum 2.00 7878.5 15757

shuttering 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

2 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, cum 0.20 11505.5 2301

balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth

level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources). for all rcc work

3 5.9 Centering and shuttering including strutting, propping etc. and removal of form for sqm 2.00 736.4 1473

4 5.22.3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding kg 5.00 107.85 539

all complete above plinth level. Thermo-Mechanically Cold twisted bars

5 6.38 Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super cum 1.00 10195.45 10195

structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate

includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

6 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Sqm 9.90 1123.8 11126

superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

7 13.4.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Sqm 59.53 357.75 21298

13.4.2 15 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Sqm 21.78 343.65 7485

8 MR -1 Providing Pest control and Anti-termite treatment by appointing a specialised agency as per the Sqm 120.00 225 27000

specifications mentioned by the Bureau of Indian Standards and Agencies specifications (whichever is

higher), for General Civil, Plumbing,/ Drainage and timber. The termite treatment has to be done in two

stages as pre-renovation and during renovation. Vendor should provide 2 yrs warranty on completion of

9 MR -2 Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions LS 1 500,000.00 500000

etc. and any other details as and when desired by Engineer In charge /client. A qualified professsional for

the purpose shall be appointed after due appproval from Engineer In Charge.

Total Carried Over to Abstract for Sub Head: 1.00 Civil Work : 70174 527000

SH 2 CLADDING WORK

1 MR -3 Providing and fixing 12 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Sqm 4.56 5116.46 23331.06

for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved

shade, colour and texture laid over 18 mm thick thick HDMR ply board, joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges

to give high gloss finish etc. complete at all levels.. Granite stone slab including machine polishing to edge

to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work Base

2 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., metre 10.56 510.95 5396.00

3 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width metre 5.47 568.95 3113.00

upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

4 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity each 4.00 978.70 3915.00

counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc.

including moulding, rubbing and polishing of cut edges etc. complete.

5 8.6 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish Sqm 2.88 506.70 1459.00

complete.Base rate 300Sqft

6 MR -5 Providing and fixing Ist quality vitrified wall tiles conforming to (thickness to be specified by the Sqm 80.00 3378.43 270274.40

manufacturer), of approved make, in all colours, shades of any size as approved by Engineerin- Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in epoxy grout of matching shade

complete. size of tiles 1200mm x 2400 mm BASE 170

7 MR-8 Providing and fixing machine cut, mirror/ eggshell polished ,Italian Marblestone work for wall lining (veneer Sqm 13.00 10102.49 131332.37

work) including dado, skirting, risers of steps etc., in required design and pattern. If required with marble

stone slab pieces of different shapes, shades and texture but of even thickness., on 12 mm (average) thick

cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/ sqm

including pointing with white cement slurry admixed with pigment of matching shade, including rubbing,

curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab of any colour basic price 450 rs Sqft

Total Carried Over to Abstract for Sub Head: 2.00 Cladding Work : 13883.00 424937.83

SH 3 DOOR & WINDOW WORK

1 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed cum 4.02 142949.7 573943

and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or

dash fastener shall be paid for separately). Second class teak wood

2 9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with metre 32.12 102.15 3281

wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as

per direction of Engineer-in-charge.

Digitally signed by AMIT

3 9.20.1 Providing and fixing marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of Sqm 178.56 3473.85 620291

block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with

vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked

Stainless Steel butt hinges with necessary screws

4 MR-13 Providing and Fixing 240 mm lock body for wooden doors of approved make and model all complete as each 5.00 1917.14 9585.70

per the direction of Engineer-in-charge.

5 MR-16 Providing and Fixing 60 mm Ultero Cylinder 1CK Antique Brass Cylinder One side knob and one side regular each 5.00 1602.87 8014.35

key for wooden doors of approved make and model all complete as per the direction of Engineer-in-charge.

6 MR-17 Providing and Fixing Rose Handle Antique Brass for Store, of approved make and model all complete as per each 5.00 3949.10 19745.50

the direction of Engineer-in-charge.

7 MR-24 Providing and Fixing Concealed Door closer T660 -60 kg (CE certified) for wooden doors of approved make each 5.00 7340.68 36703.40

and model all complete as per the direction of Engineer-in-charge.

8 MR-25 Providing and Fixing SS 304 Hinges Four Ball Bearing 100x75x3 mm (with screws) for wooden doors of each 20.00 487.83 9756.60

approved make and model all complete as per the direction of Engineer-in-charge.

9 MR-26 Providing and Fixing 300x15x15 mm ss 304 Tower bolt -Square Type with screw for Wooden Doors of each 10.00 1765.48 17654.80

approved make and model all complete as per the direction of Engineer-in-charge.

10 MR-27 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side each 2.00 142949.7 285899.40

of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in-

charge, all complete.

SH 4 FLOORING WORKS

VITRIFIED FLOOR TILES

1 Providing and laying vitrified tile flooring with 3mm Spacers CM 1:4 (1 Part Cement: 4 Part M Sand) of

20mm average. vitrified tiles of approved shade & laying pattern as per drawing in flooring with 3mm spacer

joints, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) / Tile adhesive by weber / approved

equivalent make, including grouting the joints with graphite grey epoxy resin based grout PPDG-05 of AGL /

Myk make or equivalent and matching pigments, etc. with water absorption less than 0.08%and conforming

to IS:15622, of approved, make, in all colors and shades cleaned & washed with a suitable effective Cleaning

agent or any suitable means as per instructions of EIC, covering to protect tile with 275 GSM – 2 mm thick

Floor guard make or equivalent, joints to be taped, should remain intact till handing over, removed &

disposed of out of the site after completion, etc., complete. The rates quoted shall include the Rate required

to lay the tiles at the proper level if required, the Rate & cutting of tiles for laying borders/ patterns, etc,

complete in all respects as per details. Double charge vitrified tile polished finish of size

a MR-28 Size of Tile 600 x 600 mm base rate 65 sqm 30.72 1736.58 53347.74

b MR-29 Size of tile 600 x 1200mm base rate 95 sqm 409.00 2103.42 860298.78

c MR-30 Glazed Vitrified tiles Matt/Antiskid finish of Size of Tile 600 x 600 mm base rate 70 sqm 1.10 1815.70 1997.27

2 11.48.4 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic sqm 508.16 174.5 88673

coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and

finishing complete as per direction of Engineer-in-charge. Size of Tile 1000x1000 mm

3 MR-31 Providing and fixing Engineered wooden flooring 15 mm up to 3 mm top layer, core layer pine wood oak sqm 50.00 5419.64 270982.00

finish or equivalent with necessary T- profile and reducer fixing with underlayer 2 mm thick High Density

polyurethane foam having density of approx. 90 kg/cum and 2 mm thick rubber sheet as per manufacureres

specifications and as directed by engineer in charge. base price 350sqft

4 MR-32 Providing and laying of 2mm conductive Vinyl rolls as specified and indicated. The cost to include preparing sqm 15.40 2477.55 38154.27

surface to receive vinyl flooring requirements like the floor to be absolutely leveled, hard, dried, even and

free from dirt, grease, moisture , and fixed using required adhesive ( water based adhesives like Arobond 44

of Colourbond mktg/VC 31 of Pidilite Ind. ) and correct laying technique. The make of vinyl flooring shall be

of Armstrong or equivalent of which the specs / samples have to be submitted for approval. basic price 700

Flammability : B1 Class

Sound Absorption : 3 dB

Sheet width/length : 180/16-25 cm/m

Tile side length : 60.8/60.8 cm/cm

Total wt : 2.9 kg/m2

Colour fastness : 6 stage

Electrostatic loading limit : <2 Kv

Thermal resistance : 0.010 m2K/W

5 MR-33 Providing and laying Carpet plank/ tiles of Yarn type 100% Nylon; Multi-Level Pattern Loop, manufactured sqm 72.00 4258.29 306596.88

using 100% solution dyeing process, Tiles of size 50cm x 50cm / 25cm x 100cm equivalent as per direction of

EIC and site requirement with SSP® Soil Protection treatment ™ or equivalent containing properties of Stain

Repel, with - pro care backing, pro care self guard, procare fiber with recycled content, made from

thermoplastic with commercial very heavy , Class B1, TVOC Release amoutn A level < 0.500mg/m2h

Radiant Panel class 1rated ( ASTM E648), NBS smoke < 450, Pill test -Passed, Anti Static Property less

Than 3.5 kv, Texture Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial Treatment-Passes

(AATCC-174). CRI Green Label Plus is certified for indoor air quality, including fixing/ installation with Low/

Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354) Basic Rate

MR-34 Providing And laying carpet grass of 2PP+Po lyurethane: Two layers of Polypropylene fabric + PU coating sqm 8.82 60.00 529.20

6 MR-35 Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness Rm 56.00 1392.47 77978.32

1.30 to 1.50 mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and

7 11.54.2 Providing and fixing removable raised/false access flooring with system and its components of approved sqm 6.24 5977.35 37299

make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load

bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as

per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

Digitally signed by AMIT

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness

minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x

3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI

fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment

upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be

fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the

machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm

thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded

screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer

assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor

panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor

for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as

directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high

pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an

enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel

Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and

20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious

core mixed with lightweight foaming compound.

The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology

upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a

Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel

which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL)

minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers

specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of

the panel to ensure the quality of the product 450 mm Finished Floor Height (FFH).

Digitally signed by AMIT

Total Carried Over to Abstract for Sub Head: 4.00 Flooring Works : 125972 1609884.458

SH 5 CEILING WORKS

PLAIN GYPSUM BOARD CEILING

1 12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sqm 380.00 1355.80 515204.00

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27

mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia

x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5

mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long

dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing

to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing

tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two

coats of primer suitable for board, all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the

cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

2 MR-40 Providing and fixing suspended ceiling in recessed grid system - 600 x 600 x12.5mm with Unity 4mm holes, sqm 30.00 2095.33 62859.90

c/c 10 mm with upto 0.8 NRC. Material: Perforated plasterboard ,Board type: Ceiling tileOF SIZE Length x

width x thickness: 600X600X12.5mm ,Edge: E+, recessed grid system ( 8mm recess),Perforation: Unity 4mm

Surface: Water-based acrylic paint,Colour: White NCS 0701 Y24R, RAL 9003; gloss 5, Attachment: 15 or

Silhoutte T-grid system Edge section: 20x24 mm angled profile, 15+15 x 8+25 mm cornice moulding

Suspension: Recessed grid system

• Distance between hangers ≤ 1200mm

• Distance from wall to first hanger in direction of load - bearing section ≤ 400mm

• Distance between load bearing sections ≤ 1200 mm.

• Distance from wall to first load - bearing section ≤ 600 mm

• Sub-division executed with cross - sections length 1200 and 600 mm

• Screw spacing for attachment of edge sections length 1200 and 600 mm

• Light sockets of upto 3.0 kg can be integrated directly into the ceiling tiles. In the case of heavier fittings,

load must be taken up directly by the concrete deck or via the grid systemand extra hangers.

Fire rating: A2-s1,d0k

3 MR-41 Providing and fixing suspended acoustic ceiling in visible, but flush grid system ( with technical panel ) 300 x sqm 25.74 4245.34 109275

1200 x12.5mm flush grid system with high grade, glass fibre reinforced, acoustic, white painted, gypsum tile

with acoustic perforation as Unity Round 4mm c/c 10mm with NRC upto 0.8 . Material: Perforated

plasterboard Board type: Ceiling tile Length x width x thickness: 300X1200X12.5mm Edge: E, recessed grid

system ( 8mm recess)

Perforation: Unity 4mm round

Perforation percent: 11.0%

Surface: Water-based acrylic paint

Colour: White NCS 0701 Y24R, RAL 9003; gloss 5

Attachment: 15mm T-grid system

Edge section: 20x24 mm angled profile, 15+15 x 8+25 mm cornice moulding

Suspension: Recessed grid system

• Light sockets of upto 1.0 kg per sqmtr can be integrated directly into the ceiling tiles.

4 MR- 42 Providing and fixing of Geo 100mm open cell ceiling with cell size of 100x100mm made out Aluminium . The sqm 100.00 2400.13 240013

assembled cell ceiling panels shall be in size of 600x1200 made out of blades in 9mm (W) x 40mm (H). The

assembled cell ceiling panels are then clipped into U-94 carriers in Aluminium, pre-coated in black

enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-94 carriers. Once

the U-94 carriers are installed then primary angles made out of GMS, type U1040 are cross connected to the

U-94 carriers at 1200mm c.c. for lateral bracing The whole ceiling shall be suspended by M6 threaded rods

installed 1200mm c.c.All panel modules must be hingeable through wire clips.

Digitally signed by AMIT

5 MR- 43 Providing And Fixing Modular Baffle Ceiling system: is vertical & horizontal baffle system, exhibiting space- sqm 5.50 9213.40 50674

delineating characteristics. The system comprises baffles 40mm wide & 150 Deep thickness of minimum

0.5mm GMS, installed at 150mm C/C . Baffle to be perforated having acoustic fleece pasted from inside. The

C shaped shaped carrier rails run perpendicular to the main baffles profiles. Individual baffle lengths

between 300 and 2400 mm can be selected. Baffle are supplied with the end cap matching the similar finish

of baffle. Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015 approved by

SIS. Substructure for Vertical baffle system consisting of C shape carrier of minimum 1.2mm thick installed

perpendicularly to baffles, same was hanged to wall with the help of wall anchor fasteners. Baffles to be

connected perpendicular to C shaped carriers with the help of baffle hanger brackets. The primary profiles

must be connected to one another with longitudinal splice connectors. C shaped baffle carriers to be

installed at maximum distance of 1200mm. in a length of 2400 mm baffles. Baffle width:

40mm Baffle height: 150 mm Individual baffle lengths: Min.300/Max.2400mm Material: Minimum 0.5 mm

Surface: Selected Digitally printed Woodgrain finish having minimum 80 micron paint thickness.

Manufacturer shall have the fully automatic powder coating system with power and free conveyorize

3mtr/minute capacity. Powder coating plant shall be equipped with latest modern technology with fully

automatic inline Pre-treatment using nano technology, Inline automatic water Drying system after pre-

treatment. Mode of Measurements: Measurements shall be wall to wall without any deductions for lights,

diffuses, columns etc

Digitally signed by AMIT

6 MR-44 Providing and fixing Veneer finished ceiling feature made of 19mm commercial board and all exposed sqm 42.00 5806.76 243884

surfaces finished in 4mm thick veneer of approved shade including framing, all fixing hardware, accessories,

making cove, cutout for light fixtures and any other incidentals which may require to secure to false ceiling

and to accomplish the work in all respect as per detail drawings and as directed & approved by architect.

Rate quoted to include vertical drops, making cove and all cut-outs required for light fixtures and other

services cut-outs and necessary supports with hitech rods from the true ceiling complete as directed by

Architect. BR of Veneer 180/-

7 MR-45 Providing and Fixing Custom made Stretch false ceiling to fit exact dimensions with aluminium supports. sqm 9.00 23227.05 209043

The PVCc ceiling must be stretched and hooked into aluminium rails. Stretch aluminum rails ensuring good

rigidity, to be fixed to the walls or other supports at the specified level. A properitory semi rigid PVC Anchor

( for Tension mounting ) is welded on the outer periphery of the PVC ceiling.

Following are the Technical Specification :

Ceiling Material : Stretchableceiling with PVC Harpoon welded

Thickness : 0.17mm +- 10%

Dimensional Stability : -5 deg to +45 deg C ( No visisble deformation)

Weight : (200 +_ 15 ) g / sqm

Water Vapor permeability :

For Hydrometric degree > 65% RH = 0.0045 g / hr sqm mm Hg

Very effective impermeable barrier to water

Water proof / Dust Proof / Airtight

Resistant to water , dampness, sea water, copper salt solutions and x-rays

Thermal Cofficient : 0.16 kcal/m H C

Fire Classification : B-s2-d0 acc. With DIN EN 14716

Low Emission : CLASS A+ Certified

Total Carried Over to Abstract for Sub Head: 5.00 Ceiling Works : 515204 915748.9

SH 6 WALL FINSHES WORK

1 9.105.2 Poviding and fixing partition upto ceiling height consisting of G.I. frame and required board, including Sqm 11.00 1818.15 19999.65

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc

coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with

nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall

with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre,

and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling

channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with

joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two

flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal

to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacture's specification and direction of engineer in charge all

complete. 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum

plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)

2 MR -46 Poviding and fixing partition upto ceiling height consisting of G.I. frame and required board, including Sqm 430.00 1283.33 551831.90

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc

coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre

with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with

nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall

with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre,

and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling

channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with

joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two

flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal

to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacture's specification and direction of engineer in charge all

complete. 75mm overall thickness partition

3 MR - 49 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved Sqm 750.00 1480.61 1110457.50

primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-

incharge (Frame work shall be paid for separately). 12 mm thick commercial ply conforming to IS : 1328

4 MR - 49 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved Sqm 124.02 1080.61 134017.25

primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-

incharge (Frame work shall be paid for separately). 8mm thick commercial ply conforming to IS : 1328 BWR

5 MR - 50 Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved Sqm 82.68 1021.74 84477.46

primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-

Charge 6 mm thick commercial ply conforming to IS : 1328 BWR type

6 MR - 51 Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved Sqm 124.02 962.87 119415.14

primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-

Charge 6 mm thick mdf

Digitally signed by AMIT

7 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and Sqm 130.00 5325.00 692250.00

manufacturer, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type

fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per

direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

8 MR-10 Providing Double cylender Floor Spring Combo set With Lock for Glass door (Combo set including Floor Nos 27.00 15924.17 429952.59

machine,top patch bottom patch ,pivot,Lock with Closing Force EN 3 with Maximum door weight 100 Kg.

Maximum door width 1050 mm.Closing speed : 130° Final closing speed : 15-0°. Hold Open (standard): 90°

hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested. approved make and model all

complete as per the direction of Engineer-in-charge.

9 8.28.1 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for Sqm 82.68 1946.25 160916.00

plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative

veneer facings of approved manufacture

10 9.127.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede Sqm 206.70 897.30 185472.00

finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to

IS : 2046 Type S, including cost of adhesive of approved quality.

11 MR - 55 providing and installation of ACOUSTIC WALL PANELS. The MDF wall panels shall be composed of Medium Sqm 35.10 6044.21 212152.00

Density Fiber board (MDF) with a minimum density exceeding 710 kgs/m³, and they shall be covered with

PP foil of Renolit, Germany brand/make with a thickness of 120 microns. The adhesive used for affixing the

panels must be PUR (polyurethane) hotmelt glue, and the design of the panels will be as per the

specifications provided by the architect. The dimensions of the panels are 17-18mm in thickness, 130.5mm

in width, and 2745mm in length.The scope of work includes providing and fixing these MDF wall panels onto

a framework constructed either from MDF or plywood. The framework should have a thickness of 50 mm

and a width ranging from 8mm to 12mm. The installation of the panels can be executed through either the

nail-down method or the pasting method, with the use of a high bonding adhesive suitable for MDF and

plywood, NRC 0.65 upto 1 NRC . The finishing of the MDF wall panels should adhere to the approved

architectural drawings and the directions provided by the Engineer-in-Charge (EIC).

12 MR Providing and installation Partition thickness: Panel with concealed edge profiles: thickness 100 / 110 mm sqm 5.00 75320.00 376600.00

depends upon height of movable wall Single roller / double roller system depending height and stacking at

site Range of sound insulation coefficient：42db-50db Interlocking male / female trapezoidal vertical

aluminium profiles, for soundproof connection between elements.Steel Work covered with noise barrier

baffles to control noise propagation from one side to other side

MR -56 Providing & Fixing PVC wall covering 1 to 2mm thick as per design and finish having fiber backing for sound Sqm 41.34 2787.25 115225.00

insulation. Covering to be pasted on Mdf base with adhesive as approved by manufacture. Material should

be fire resistance as per ISO 105-B02 > grade 8 All complete as per engineer in charge

14 MR - 57 Providing & fixing 6 mm thick GRIHA rated lacquered glass with flat polished edge fixed to 5.5 mm thick Sqm 47.52 4335.72 206033.41

plain MDF board backing with neutral silicone and/or double-sided adhesive pads etc. ,including

polishing/MTG all complete as per the drawing & directions of engineer-in-charge. 6.0 mm thick

15 MR - 58 Providing & fixing commercial grade wall paper of approved shade to MDF/Gypsum board/POP Punning sqm 82.68 1858.16 153632.67

base backing which have 100% washable, scratch resistance, peel proof, and fire retardant properties,

including preparation on the punned surface for receiving the wall paper, adhesive as per the manufacturer

specification, all complete as per the drawing & directions of engineer-in-charge( Base backing to be paid

16 MR - 59 Providing and fixing electroplating SS PROFILE of colour and design as per engineer in charge Metre 306.22 708.04 216818.00

17 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the sqm 601.76 262.70 158081.00

surface even and smooth complete.

18 MR Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per sqm 601.76 484.20 291370.00

manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one

coat of Special primer applied @ 0.75 ltr /10 sqm

19 MR Providing and applying two or more coats of Textured Paint/ Surface Coating of approved make and shade sqm 113.40 807.00 91514.00

over walls etc. after preparing the surface with a coat of primer and 6 mm thick plaster of paris punning to

give a smooth and even surface etc. complete. base price 85 per sqft

20 13.116 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade sqm 138.36 3049.00 421854.00

texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat

is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove

excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with

special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry

for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.

Digitally signed by AMIT

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine

thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine

wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with

compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required

proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without

21 MR -60 Providing and fixing Roller Blind system consisting of a coated aluminium tube of 38 mm diameter of sqm 100.00 2787.25 278725.00

approved colour with provision of fabric clamping. The Fabric is rolled up and down through a chain drive

system with built in drive gear and an over run brake system. The side brackets are universal type suitable

both for wall and ceiling mounting. The bottom end of the fabric is rolled over an oval shape aluminium tube

with provision to lock the fabric.The rate shall be inclusive of all the necessary material,required hardware,

labour, transportation, necessary for the complete execution of the item . basic price 180 Sqft

22 MR -61 Providing and fixing motorized Roller Blind system with remote consisting of a coated aluminium tube of 38 sqm 11.88 5030.53 59762.70

mm diameter of approved colour with provision of fabric clamping. The Fabric is rolled up and down through

a chain drive system with built in drive gear and an over run brake system. The side brackets are universal

type suitable both for wall and ceiling mounting. The bottom end of the fabric is rolled over an oval shape

aluminium tube with provision to lock the fabric.The rate shall be inclusive of all the necessary

material,required hardware, labour, transportation, necessary for the complete execution of the item .

23 MR -62 Providing & Fixing 3M & equivalent Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL- Sqm 120.00 1316.20 157944.00

effect film to reproduce Sand-blasting effect on glass with customized designs, thickness of 2 mil (0.05mm)

without adhesive & 3M & equivalentil (0.8)with adhesive having minimum tensile strength of 3.5

pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7

kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs

(indoors) must be endorsed by Electronically/computer plotter cut. Applied on glass and other rigid, clear

substrates. (partitions, doors, windows etc.) Available in 5 colours

Total Carried Over to Abstract for Sub Head: 6.00 Wall Finshes Work : 1329206.65 4899294.622

SH 7 REPAIRS TO BUILDING 0

1 14.75 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the Sqm 160 670.95 107352 0

patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based

polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of

Engineer-In-Charge.

Total Carried Over to Abstract for Sub Head: 7.00 Repairs To Building : 107352 0

SH 8 METAL WORK

1 10.25.2 Steel work welded in built up sections/ framed work, including cutting,vhoisting, fixing in position and Kg 22.00 172.6 3797

applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames,

guard bar, ladder, railings, brackets, gates and similar works

2 10.16.3 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, Kg 130 194.4 25272

hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and

bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

Total Carried Over to Abstract for Sub Head: 8.00 Metal Work : 29069 0

SH 9 WATER PROOFING

INTEGRAL CEMENT BASED TREATMENT

1 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement

slurry mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253

kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126

kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.

22.5 The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and sqm 18.00 617.05 11107

masonry with polymer mixed slurry.

Total Carried Over B215:B216to Abstract for Sub Head: 9.00 Water Proofing : 11107 0

Digitally signed by AMIT

1 Main Table Providing and Placing Main TAble of Size 2000x2100x750.MAIN WORKTOP Size 2400x900x740, ERU Each 1 132,570.55 132,570.55

1200x450x610mm- Main worktop - Made of 43mm Thick (±1) combination of commercial ply and particle

board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick

veneer lipping.LEATHER PAD:Made of 18mm Thick (±1) commercial ply with Leatherette wrapped around top

surface. This leather pad is fixed to main top panel.DRAWER UNIT:Top panel and drawer unit modesty panel

is made of 43mm Thick (±1) combination of commercial ply and particle board with top veneer face coated

with clear lacquer. All thickness edges are edge banded with matching lipping.Remaining construction is of

18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge

banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with

leatherette on top surface.Drawer unit is provided with soft closing channels for smooth opening and

closing.Drawer unit is secured with side central lock.OPEN STORAGE UNIT:Top panel and open storage unit

modesty panel is made of 43mm Thick (±1) combination of commercial ply and particle board with top

veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping.Remaining

construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping.MODESTY:Made of 18mm Thick Pre-

laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded

with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims.UNDERSTRUCTURE:Made of

18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990,

Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is

provided for ease of opening.Also lock is provided on side panel for security.ACCESS FLAP WITH POWER

BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI

connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections.

2 Backunit The Back Unit shall be . It shall be made of 25mm thick MDF –combination of commercial ply and particle Sqm 3.6 22,273.20 80,183.52

board and veneer face coated with clear lacquer confirming to IS-14587:1998 with 0.4 mm PVC membrane

pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam

mechanism. Handles are provided for ease of opening. Storage is provided with lock for security. customised

3 Main chair HIGH BACK CHAIR FOR CABIN Each 1 45,750.80 45,750.80

SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.-POSTURE

PERFECT HIGH BACK CHAIR: STANDARD LEATHER Upholstered seat sub-assembly consists of moulded High

Resilience (HR) Polyurethane foam of Density 45+2 kg/m°, and hardness load 16 ÷ 2 kgf as per IS 7888 for

25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W).BACK ASSEMBLY: The Cushioned back is made of PU

Foam with Polypropylene Injection molded.Plastic Inner.HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D)

ARMRESTS: The armrest having four range of adjustment.Height adjustment sub assembly is inserted in the

Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly.Up-

Down adjustment has 8 position (10.5+0.5cm range).Arm top swivel adjustment- 2 position, 12°+2° swivel

inside.Arm top width adjustment - Any position (2.0÷0.5cm range each arm top) Arm top To - Fro Adjustment-

any position (4.0$0.5cm range).Armrest top is made up of high density PU molded over glass filled Poly-

amide inner.POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the

following features:360° revolving type. Forward tilt of sesat and back. Upright tilt lock.Tilt tension adjustment

can be operated in seating position.3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment

is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat

Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0$0.5 cm.ADJUSTABLE BACK

SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism

assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5+0.5

cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an

adjustment stroke of 13.0$0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish.

It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ÷ 0.5cm pitch-center dia. TWIN WHEEL CASTOR:

5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.50.1cm wheel

Diameter and assembled to pedestal.

4 Visitor Chair Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5- Each 3 35,530.45 106,591.35

114cm. Seat height shall be 44.5cm - 54.5cm. The cushioned seats shall be made of injection moulded plastic

outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance

polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of

compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of

PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with

pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather

and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01

cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm

in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving

type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort,

Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt

angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black

powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat

depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism

housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to

suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The

pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The

pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in

plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.

Digitally signed by AMIT

5 Waiting Sofa Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x Each 2 38,882.65 77,765.30

2 seator 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of

supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK

FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of

supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be

made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per

IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

6 Waiting Sofa Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x Each 1 29,832.15 29,832.15

1 seator 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of

supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK

FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of

supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be

made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per

IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

7 Center table Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for Each 1 25,114.45 25,114.45

fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per

IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

8 Side table Overall size of 600mm(L)600mm(D)x450mm(H)Designed for the modern Each 2 11,311.40 22,622.80

minimalist with a need for handy, compartmentalized storage.• Tabletop of durable, toughened glass with a

digitally back-printed Skyline pattern creates a sleek, modern look.• A strong, knockdown construction built

A PS Room And Cubical

1 Main Table Providing in place of main table with overall size of table 1650 x 1550 x 750mm. The main table shall be of Each 4 45,491.85 181,967.40

size 1650 x 750 x 750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick

commercial ply – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane

pressed on to top. Soft closing access flap within-build power box are provided on work surface for wire

management. The ERU top is made of 25 mm thick commercial ply one side pre-laminate board confirming to

IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick

commercial ply one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane

pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick

Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

lipping. Drawer fronts made of 25 mm thick commercial ply one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM

long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam

mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

2 backunit Supplying of side storage unit of officers having dimension 1190WX 450DX 740H:Overall size of hinge door Each 6 15,386.20 92,317.20

unit is 1190(H)x740mm (h)x450 mm (D). Providing and placement of back storages with : CONSTRUCTION &

MATERIAL Construction is a knockdown construction of 25mm thk and 18mm thk Pre-Laminated boards with

metal cladding of 1.0 mm thk C.R.C.A (as per IS:513) from outside. Side metal cladding is coated with Epoxy

polyester powder of 50±10 microns thickness. TOP OPTIONS- The Storage units are provided with 11mm thk

bent metal tops made of 1.0 mm thk C.R.C.A (as per IS:513). The metal tops are coated with Epoxy polyester

powder of 50± 10 microns thickness. DOOR & DOOR OPENING two door opening for all other width of 1150

W.The doors are made of 18mm thk Pre-laminated boards with decorative laminate on one side and backing

laminate on the other side. SHELVING- Height wise adjustable shelf mounting holes provided on side panels

for easy interchange of shelf height as required. Fixed shelves along with adjustable shelves provided only in

case of 4.0 feet height units. No fixed shelves for 2.5 feet height storage units. Uniformly distributed load

capacity for each shelf is 40kg maximum. SKIRTING OPTION- The skirting units are provided with 150mm high

skirting made of 1.0 mm thick C.R.C.A(as per IS:513) and is coated with Epoxy polyester powder of 50+-10

micros thickness. LEVELER-Screw type adjustable leverer with plastic base provides vertical adjustment for

floor unevenness and levelling of units.BACK PANELS Back panels are made of 18mm thick pre-laminated

boards with options of decorative as well as fabric finishes. 2.5 height units consists of single back panel

whereas 4.0 height and 4.5 height units consist of split back top panel and split back bottom panels

separated by an Aluminium extrusion. LOCKING MECHANISM- 3-way nickel plated wooden furniture lock is

provided for effective and positive locking of doors. HANDLE- Aesthetically appealing recessed handles of

Aluminium extrusion are provided for easy opening and closing.The OEM should be ISO 9001:2015,ISO

14001:2015 & ISO 18001:2007 certified.

Digitally signed by AMIT

3 Main chair The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered Each 4 12,207.65 48,830.60

seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should

made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using

polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat

shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished

aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment

shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is

operated with button. Armtop is made up of PU molded over plastic inner. The mechanim shall be Active Bio

Synchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type,

Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt

angle to the chair. Front-Pivot for tilt with feet resting on ground and continious lumber support should

ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder

coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3

cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel

castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The

twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should

consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. Overall

dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal

below. Height from ground - 99 cm. Seat height - 49 cm. Dimensions tolerance / variations shall be within +/-

Digitally signed by AMIT

4 visitor chair The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered Each 8 10,207.65 81,661.20

seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should

made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using

polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat

shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished

aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment

shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is

operated with button. Armtop is made up of PU molded over plastic inner. The mechanim shall be Active Bio

Synchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type,

Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt

angle to the chair. Front-Pivot for tilt with feet resting on ground and continious lumber support should

ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder

coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3

cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel

castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The

twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should

consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. Overall

dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal

below. Height from ground - 99 cm. Seat height - 49 cm. Dimensions tolerance / variations shall be within +/-

1 Main Table Providingin place of main table with overall size of table2000x 2100 x 750mm. The main table shall be of size Each 3 72,570.55 217,711.65

1800 x 750 x 750mm. The side unit shall be 1000 x 500 x 750mm. The table is made of 25 mm thick MDF –

one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.

Soft closing access flap within-build power box are provided on work surface for wire management. The ERU

top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of

25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick

MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is

BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is

325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening.

Pedestals are provided with lock for security.

2 Backunit The Back Unit shall be . It shall be made of 25mm thick MDF –combination of commercial ply and particle Sqm 9.6 19,368.00 185,932.80

board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is

made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with

matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided

for ease of opening. Storage is provided with lock for security. customised

3 Main chair Providing & placing high back chair.SEAT ASSEMBLY : Each 3 25,750.80 77,252.40

The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring core, super soft foam of

32 kg/m3 density and edging foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over

foam sub-assembly and upholstered in natural leather or leatherette.BACK ASSEMBLY :

The back assembly is made up of a gombination of pinewood members, 12mm thick MR Grade plywood and

2mm thick cardboard, layered with slab stock foam of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet

is placed over foam sub-assembly and upholstered in natural leather or leatherette.ARMPAD ASSEMBLY :

The armpad assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated brackets,

layered with foam of 60 kg/m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-

assembly and upholstered in natural leather or leatherette.4. CENTER TILT WITH MULTI POSITION LOCK

MECHANISM: The mechanism is designed with the following features:

360° revolving type

3 position locking

Tilt tension adjustmentPNEUMATIC HEIGHT ADJUS/MENT: The Class 4 pneumatic height adjustment has ar

stroke of 10 ÷ 0.3 cm.6. PEDESTAL ASSEMBLY :

The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black

color-coated internal surface. It is fitted with 5 castors and has a pitch-center diameter of 67.5#0.5 cm

(77.51.0 cm with castors).

7. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black polyamide.

Digitally signed by AMIT

4 Visitor Chair Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5- Each 9 15,530.45 139,774.05

114cm. Seat height shall be 44.5cm - 54.5cm. The cushioned seats shall be made of injection moulded plastic

outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance

polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of

compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of

PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with

pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather

and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01

cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm

in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving

type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort,

Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt

angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black

powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat

depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism

housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to

suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The

pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The

pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in

plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.

5 Waiting Sofa Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x Each 6 29,832.15 178,992.90

1 seator 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of

supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK

FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of

supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be

made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per

IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

8 Side table Overall size of 600mm(L)600mm(D)x450mm(H)Designed for the modern Each 2 11,311.40 22,622.80

minimalist with a need for handy, compartmentalized storage.• Tabletop of durable, toughened glass with a

digitally back-printed Skyline pattern creates a sleek, modern look.• A strong, knockdown construction built

1 Main Table Providingin place of main table with overall size of table 1800 x 1800 x 750mm. The main table shall be of size Each 11 55,949.95 615,449.45

1800 x 750 x 750mm. The side unit shall be 1000 x 500 x 750mm. The table is made of 25 mm thick MDF –

one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.

Soft closing access flap within-build power box are provided on work surface for wire management. The ERU

top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board

confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of

25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick

MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is

BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is

325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening.

Pedestals are provided with lock for security.

2 backunit The Back Unit shall be of CUSTOMIZED. It shall be made of 25mm thick MDF – one side pre-laminate board Sqm 31.68 19,368.00 613,578.24

confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of

25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of

opening. Storage is provided with lock for security.

Digitally signed by AMIT

3 Main chair Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded Each 11 18,800.00 206,800.00

plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance

polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of

compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of

PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with

pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polurethane,

and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest

support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The

armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be

designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and

contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating

position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the

mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be

integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back

frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the

range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height

adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast

polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch

centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel

diameter and assembled to pedestal.

FOLDABEL TABEL Providing and fitting foldable table including all cabin made 18 mm thick ply wood finish with laminate Each 23 25,000.00 575,000.00

Digitally signed by AMIT

4 Visitor Chair Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5- Each 60 15,600.00 936,000.00

114cm. Seat height shall be 44.5cm - 54.5cm. The cushioned seats shall be made of injection moulded plastic

outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance

polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of

compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of

PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with

pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather

and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01

cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm

in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving

type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort,

Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt

angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black

powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat

depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism

housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to

suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The

pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The

pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in

plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.

F WORK STATION - -

linear Supplying of Recta workstation of size 1200 X 600x 750 with KBPT .Providing DESK based modular Each 60 18,200.85 1,092,051.00

workstation with worktop thickness 25mm System ht - 750 mm .Understructure - The slanted legs with

perforated metal modesty in between are connected to the understructure with the help of PDC Connectors

to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA.

Wire Management : Metal powder coated power box with wire raiser+D56 is given to pull wires from the

floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop

above power box cut out for accessing switches.Worktop mounted metal modesty made from 0.8 mm thk

CRCA (IS: 513) is provided.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge

banding of size 1200 mm w x 600 mm d.Pedestals - Nova pedestal flat metal front, full ht free standing

central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. .The product should be

GREENPRO, SCS IAQ, GRIHA, BIFMA certified.

Main chair Supplying and placing of chair of dimensions 635W x 630D x 800H mm. The seat height shall be 455mm.The Each 60 12,207.65 732,459.00

back shell shall be made of 15mm plywood panle connected using Brackets made from 3mm Hot Rolled Steel

Plates . Steel brackets are Epoxy Polyester Powder Coated. 25mm PU Slab -Stock foam is pasted onto both

sides of the shell and pinched together to achieve the radius along the periphery. It shall be upholstered in

Leatherette / fabric. The seat cushion shall be made using 50mm PU Slab-stock foam and is upholstered in

Leatherette. It shall be held in place with Hook and Loop tape stitched to its bottom side. The understructure

shall be made of seasoned Tewak Wood finished witrh clear matt coat of PU Lacquer. Undrstrucutre

members shall be glued together using Epoxy Resin Based Adhesive. The shell is fixed to the understructure

using Alloy steel hardware (blackened and coated with rust preventive oil).

Standing tabel Supplying of Recta workstation of size 900 X900x 900 with KBPT .Providing DESK based modular Each 4 15,000.00 60,000.00

workstation with worktop thickness 25mm System ht - 750 mm .Understructure - The slanted legs with

perforated metal modesty in between are connected to the understructure with the help of PDC Connectors

to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA.

Wire Management : Metal powder coated power box with wire raiser+D56 is given to pull wires from the

floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop

above power box cut out for accessing switches.Worktop mounted metal modesty made from 0.8 mm thk

CRCA (IS: 513) is provided.Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge

banding of size 1200 mm w x 600 mm d.Pedestals - Nova pedestal flat metal front, full ht free standing

central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. .The product should be

GREENPRO, SCS IAQ, GRIHA, BIFMA certified.

Stool Supplying and Placing of stool of dimension 410+10 mmx 410+10 mm x 600 mm Height. ertical leg with 19 Each 4 5,000.00 20,000.00

mm outside diameter tube of 1.2 mm thickness. Seat circular frame with 12 mm outside diameter tube 1.02

mm thickness. ircular seat of minimum diameter 300 mm of 0.9 mm thick sheet having the curled circular

peripheral edge and 20 mm deep. Lower cross support 18 mm outside diameter 0.9 mm thick.

G CONFERENCE - -

1 BOARD ROOM Providing and Placing in position Conference table for 12 seater having 6 Nos of 2 Seater Modules of size Each 1 127,288.25 127,288.25

1350mm X 600mm X 740mm . Worktop- Made of 25mm thick PLY BOARD FINISHED IN VINEAR AND CLEAR

PU POLISH one side pre-laminate board conforming to IS-14587:1998 with 0.4mm PVC membrane pressed on

to top and having chamfered edge.access flap is provided for easy access to wires and cables.Modesty

consist of 18mm Thick PLY Board finished with 4 mm thick approved vineer in PU clear polish as per desired

approved shade conforming to IS-12823:1990, Aluminium alloy 63400 - WP profile is used for connecting

panels together. The product has a knock-down construction.It consist of 18mm Thick Pre-laminated twin

board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm

thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has

a knock-down construction.An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder

coated(DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module

plate is provided below worktop. Cutout on top with two piece injectionmoulded plastic part polymer

component is fitted to pull out audio,video cables ontoworktop and connect devices charger to power socket

Digitally signed by AMIT

2 Main chair HIGH BACK CHAIR FOR CABIN Each 1 35,682.50 35,682.50

SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.-POSTURE

PERFECT HIGH BACK CHAIR: STANDARD LEATHER Upholstered seat sub-assembly consists of moulded High

Resilience (HR) Polyurethane foam of Density 45+2 kg/m°, and hardness load 16 ÷ 2 kgf as per IS 7888 for

25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W).BACK ASSEMBLY: The Cushioned back is made of PU

Foam with Polypropylene Injection molded.Plastic Inner.HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D)

ARMRESTS: The armrest having four range of adjustment.Height adjustment sub assembly is inserted in the

Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly.Up-

Down adjustment has 8 position (10.5+0.5cm range).Arm top swivel adjustment- 2 position, 12°+2° swivel

inside.Arm top width adjustment - Any position (2.0÷0.5cm range each arm top) Arm top To - Fro Adjustment-

any position (4.0$0.5cm range).Armrest top is made up of high density PU molded over glass filled Poly-

amide inner.POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the

following features:360° revolving type. Forward tilt of sesat and back. Upright tilt lock.Tilt tension adjustment

can be operated in seating position.3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment

is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat

Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0$0.5 cm.ADJUSTABLE BACK

SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism

assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5+0.5

cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an

adjustment stroke of 13.0$0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish.

It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ÷ 0.5cm pitch-center dia. TWIN WHEEL CASTOR:

5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.50.1cm wheel

Diameter and assembled to pedestal.

3 Chair VISITOR CHAIR FOR CABIN Each 30 22,129.00 663,870.00

SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.-POSTURE

PERFECT FULL BACK CHAIR: STANDARD LEATHER Upholstered seat sub-assembly consists of moulded High

Resilience (HR) Polyurethane foam of Density 45+2 kg/m°, and hardness load 16 ÷ 2 kgf as per IS 7888 for

25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W).BACK ASSEMBLY: The Cushioned back is made of PU

Foam with Polypropylene Injection molded.Plastic Inner.HIGH BACK SIZE: 50.5 cm. (W) x 61.8 cm. (D)

ARMRESTS: The armrest having four range of adjustment.Height adjustment sub assembly is inserted in the

Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly.Up-

Down adjustment has 8 position (10.5+0.5cm range).Arm top swivel adjustment- 2 position, 12°+2° swivel

inside.Arm top width adjustment - Any position (2.0÷0.5cm range each arm top) Arm top To - Fro Adjustment-

any position (4.0$0.5cm range).Armrest top is made up of high density PU molded over glass filled Poly-

amide inner.POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the

following features:360° revolving type. Forward tilt of sesat and back. Upright tilt lock.Tilt tension adjustment

can be operated in seating position.3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment

is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat

Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0$0.5 cm.ADJUSTABLE BACK

SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism

assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5+0.5

cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an

adjustment stroke of 13.0$0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish.

It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ÷ 0.5cm pitch-center dia. TWIN WHEEL CASTOR:

5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.50.1cm wheel

Diameter and assembled to pedestal.

H Meeting room - -

1 Meeting room Providing and placing in position meeting table. Size 2400mmx 1200mmx 740mm. Worktop shall be made Each 1 65,129.00 65,129.00

from 25mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top and having

chamfered edge. Soft closing dual access flap provided for access to power supply and data cables. The

Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and

approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised

aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product has a

knock-down construction. A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated

(DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8

module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for

mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be UL Greenguard certified.Complete

all as per the direction of Engineer in Charge.

Digitally signed by AMIT

2 Meeting chairs Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5- Each 6 25,500.00 153,000.00

114cm. Seat height shall be 44.5cm - 54.5cm. The cushioned seats shall be made of injection moulded plastic

outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance

polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of

compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of

PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with

pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather

and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01

cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm

in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving

type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort,

Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt

angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black

powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat

depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism

housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to

suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The

pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The

pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in

plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.

Meeting room - -

Meeting room The overall size of the meeting table is 1800 dia.he top shall be made up of 25mm thick pre laminated Each 1 65,129.00 65,129.00

partical board with 2mm PVC edge band. Leg: shall be made up of high pressure aluminum die casted 20

degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom and of

725mm length to get 750mm table height, it shall acts as vertical structural support member, connected by a

horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs

through a high pressure Aluminium diecast connectors.The OEM shall ISO 9001, BIFMA Level 2 certification &

IGBC gold certified manufacturing facility.

Meeting chairs Providing and Placing in Position Mid Back Chair. The overall dimensions shall be 76.1cm x 76.1cm x 96.5- Each 5 25,500.00 127,500.00

114cm. Seat height shall be 44.5cm - 54.5cm. The cushioned seats shall be made of injection moulded plastic

outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance

polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of

compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of

PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with

pure leather. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather

and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01

cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm

in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving

type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort,

Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt

angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black

powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat

depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism

housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to

suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The

pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The

pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in

plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.

1 3 seater sofa The overall size of the sofa shall be 2350 L x 790 D x 790 H. Sofa inner frame structure shall be made mainly Each 1 69,000.00 69,000.00

from the combination of treated pine wood of 20-25mm thick & neem based plywood sheets. The

polyurethane (PU) foam of density 32 and 40 shall be used in seat constructions and 32 density foam used in

back construction along with the webbing belts. Seat height should be 440mm (+/- 10mm) and seat depth

shall be 525mm (+/- 20mm). Each sofa individual set type shall consist of 4 metal legs of 200 mm height that

shall be laser cut and press formed in 2mm thick CR steel in complaince with IS 513: 2008. The legs shall be

formed in V-shape with 125 x 125mm length flanges on its top face and moulded leg bush shall be fixed at its

bottom that shall support height adjustment of upto 10mm. To suppor thte sofa two nos wide flanges of the

leg shall be be provided. Legs shall be pretreated through nano ceramic process that shall be environment

friendly to enable powder coating to the thickness of 50-80 microns. The fabric used shall be 450-475 gms

per meter having abrasion resistance of more than 50K rubs high quality polyester fabric.The OEM shall ISO

9001, BIFMA Level 2 certification & IGBC gold certified manufacturing facility.

2 single seater sofa The overall size of the sofa shall be 850 L x 790 D x 790 H. Sofa inner frame structure shall be made mainly Each 2 33,000.00 66,000.00

from the combination of treated pine wood of 20-25mm thick & neem based plywood sheets. The

polyurethane (PU) foam of density 32 and 40 shall be used in seat constructions and 32 density foam used in

back construction along with the webbing belts. Seat height should be 440mm (+/- 10mm) and seat depth

shall be 525mm (+/- 20mm). Each sofa individual set type shall consist of 4 metal legs of 200 mm height that

shall be laser cut and press formed in 2mm thick CR steel in complaince with IS 513: 2008. The legs shall be

formed in V-shape with 125 x 125mm length flanges on its top face and moulded leg bush shall be fixed at its

bottom that shall support height adjustment of upto 10mm. To suppor thte sofa two nos wide flanges of the

leg shall be be provided. Legs shall be pretreated through nano ceramic process that shall be environment

friendly to enable powder coating to the thickness of 50-80 microns. The fabric used shall be 450-475 gms

per meter having abrasion resistance of more than 50K rubs high quality polyester fabric. The OEM shall ISO

9001, BIFMA Level 2 certification & IGBC gold certified manufacturing facility.

Digitally signed by AMIT

3 Center table The overall size of glass table shall be 1200L x 600W x 425H. The table top shall be made of 8mm thick Each 1 25,000.00 25,000.00

toughned glass. The understructure shall be made of 19mm SS round tube. Leg shall be provided ABS shoe to

protect from streched.The OEM shall ISO 9001, BIFMA Level 2 certification & IGBC gold certified

manufacturing facility.

4 Side Table The overall size of glass table shall be 600L x 600W x 505H. The table top shall be made of 8mm thick Each 2 13,900.00 27,800.00

toughned glass. The understructure shall be made of 19mm SS round tube. Leg shall be provided ABS shoe to

protect from streched.The OEM shall ISO 9001, BIFMA Level 2 certification & IGBC gold certified

manufacturing facility.

Digitally signed by AMIT

1 Full Height Storage The overall size shall be 1500 x 450 x 1800 (WDH) mm. Top shall be made up of 18mm thick pre laminated Each 2 39,000.00 78,000.00

particle board and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge

lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. 4 Shutters to be provied for

uper & lower compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. Locking

faciltity should be provided for safe storage of documents. The prelaminated board used shall be of E1

norms. The OEM shall ISO 9001, BIFMA Level 2 certification & IGBC gold certified manufacturing facility.

1 Full Height Storage The overall size shall be 1500 x 450 x 1800 (WDH) mm. Top shall be made up of 18mm thick pre laminated Each 2 39,000.00 78,000.00

particle board and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge

lipping, Shutters shall be made up of 18 mm thick pre laminated particle board. 4 Shutters to be provied for

uper & lower compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. Locking

faciltity should be provided for safe storage of documents. The prelaminated board used shall be of E1

norms. The OEM shall ISO 9001, BIFMA Level 2 certification & IGBC gold certified manufacturing facility.

M WORK STATION AREA STORAGE

1 Workstation area Supplying of side storage unit of officers having dimension 1190WX 450DX 1200 H:Overall size of hinge door Each 20 21,836.00 436,720.00

storage (1200X450) unit is 1190(H)x740mm (h)x450 mm (D). Providing and placement of back storages with : CONSTRUCTION &

MATERIAL Construction is a knockdown construction of 25mm thk and 18mm thk Pre-Laminated boards with

metal cladding of 1.0 mm thk C.R.C.A (as per IS:513) from outside. Side metal cladding is coated with Epoxy

polyester powder of 50±10 microns thickness. TOP OPTIONS- The Storage units are provided with 11mm thk

bent metal tops made of 1.0 mm thk C.R.C.A (as per IS:513). The metal tops are coated with Epoxy polyester

powder of 50± 10 microns thickness. DOOR & DOOR OPENINGtwo door opening for all other width of 1150

W.The doors are made of 18mm thk Pre-laminated boards with decorative laminate on one side and backing

laminate on the other side. SHELVING- Height wise adjustable shelf mounting holes provided on side panels

for easy interchange of shelf height as required. Fixed shelves along with adjustable shelves provided only in

case of 4.0 feet height units. No fixed shelves for 2.5 feet height storage units. Uniformly distributed load

capacity for each shelf is 40kg maximum. SKIRTING OPTION- The skirting units are provided with 150mm high

skirting made of 1.0 mm thick C.R.C.A(as per IS:513) and is coated with Epoxy polyester powder of 50+-10

micros thickness. LEVELER-Screw type adjustable leverer with plastic base provides vertical adjustment for

floor unevenness and levelling of units.BACK PANELS Back panels are made of 18mm thick pre-laminated

boards with options of decorative as well as fabric finishes. 2.5 height units consists of single back panel

whereas 4.0 height and 4.5 height units consist of split back top panel and split back bottom panels

separated by an Aluminium extrusion. LOCKING MECHANISM- 3-way nickel plated wooden furniture lock is

provided for effective and positive locking of doors. HANDLE- Aesthetically appealing recessed handles of

Aluminium extrusion are provided for easy opening and closing.The OEM should be ISO 9001:2015,ISO

14001:2015 & ISO 18001:2007 certified.

2 Storage room wall side Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It Each 2 26,800.00 53,600.00

storage should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield

strength) and all other components shall have a thickness of 0.9mm. These components shall be made of

CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three

way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which

shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller

with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).

Plenty of colour options and shelving options shall be available.

1 Reception Providing and Placing Reception TAble of Size as Per Site WORKTOP - Main worktop Made of 43mm Thick Each 1 95,900.00 95,900.00

(±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are

edge banded with matching 1mm thick veneer lippingMade of 18mm Thick (±1) MDF with Leatherette

wrapped around top surface. This leather pad is fixed to main top panel.DRAWER UNIT:Top panel and drawer

unit modesty panel is made of 43mm Thick (±1) combination ofMDF and particle board with top veneer face

coated with clear lacquer. All thickness edges are edge banded with matching lipping.Remaining construction

is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990,

Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with

leatherette on top surface.Drawer unit is provided with soft closing channels for smooth opening and

closing.Drawer unit is secured with side central lock.OPEN STORAGE UNIT:Top panel and open storage unit

modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face

coated with clear lacquer. All thickness edges are edge banded with matching lipping.Remaining construction

is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990,

Edge banded with matching 2 mm thick PVC lipping.MODESTY:Made of 18mm Thick Pre-laminated twin

board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2

mm thick PVC lipping. Modesty is fitted with aluminum trims.UNDERSTRUCTURE:Made of 18mm Thick Pre-

laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded

with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease

of opening.Also lock is provided on side panel for security.ACCESS FLAP WITH POWER BOX:Soft closing access

flap with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc.

cable grommet and CAT 3 and CAT 6connections.

Digitally signed by AMIT

2 Reception Chair The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered Each 1 20,400.00 20,400.00

seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should

made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using

polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat

shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished

aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment

shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is

operated with button. Armtop is made up of PU molded over plastic inner. The mechanism shall be Active

BioSynchro Mechanism. The mechanism of chair shall have following features:360 degree revolving type,

Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt

angle to the chair. Front-Pivot for tilt with feet resting on ground and continious lumber support should

ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder

coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3

cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel

castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The

twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should

consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. The

neckrest assembly consists of upholstered neckrest inner(material-poly propylene) with moulded

polyurethane foam and polyster fabric. upholstered inner shall be fixed to neck rest cover. neckrest shall be

fixed to back assembly through neckrest spline. Overall dimensions of Chair shall be, Width of Chair - 75.0cm,

Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 109.3 to max 124.4

cm. Seat height - min 45.5cm to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Waiting Sofa Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x Each 2 36,882.65 73,765.30

2 seator 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of

supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK

FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of

supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be

made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per

IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm

dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded

assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

P PANTRY - -

Digitally signed by AMIT

1 MR Modular kitchen - Under counter storage cabinets: Sqm 2.4 14,848.80 35,637.12

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with

openable shutters and sufficient number of drawers made of 18mm thick ISI marked HDHMR, all ply to be

laminated with 0.8mm laminate. All shelves should be supported on approved quality SS pins and shall be

adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thick

with laminate on both sides with 18mm wide 2mm thick PVC edge banding. All Shutters finished in high gloss

acrylic of approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable

legs which will be covered with PVC skirting in brushed aluminum finish attached by hardware of skirting. The

unit shall be fixed to the floor/ wall/ slab using metal screws of appropriate size and rawl plugs. Only front

face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and

payment. Cabinet boxes size would be varies from 400x560x710mm to 1000x560x710mm (approx.) and join

together as per site requirements etc.

2 MR Modular Kitchen - Overhead storage wall units: Sqm 2.4 18,561.00 44,546.40

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with

openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked HDHMR BOARD. All ply

to be laminated with 0.8 mm laminate.All shelves should be supported on approved quality SS pins and shall

be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm

thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high

gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size

and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for

measurement and payment. Cabinet boxes size would be varies from 400x560x710mm to 1000x560x710mm

(approx.) and join together as per site requirements etc.

3 MR Providing and fixing with metal sides and quadro channels each 15 4,080.20 61,203.00

4 MR Providing and fixing baskets each 5 4,614.95 23,074.75

This sign board has double side display and will be use two separate sign sheet for each side. Sign structure

will be made by using MS SHS only. Top end of all hollow sections should be properly covered using MS sheet

and closed. All SHS should be free from any type of rust, oil and tint and properly welded to form sign

structure. Complete sign structure will be Epoxy powder coated free from scratches or voids. SHS post height

will be 3.60 mtr. and minimum 600 mm. grouting in earth pit using M-20 grade concrete is compulsory.

bottom of sign should be minimum 1.80 mtr. (72.0 Inches) from ground level after installation. Only 4.0mm

thick ACP substrate will be used confirming to IRC:67 Table Number 6.1. Only IRC:67 Class B (As per ASTM D

4956 Type IV) Retro reflective sheeting will be used in sign boards. All written matter should be of reverse cut

in transparent overlay film provided by original retro reflective sheeting provider. Where ever digital printing

is required or used all printing process will be done as per recommended by original retro reflective sheeting

manufacturer and over laminated by using clear cast UV protected over lamination recommended by retro

reflective sheeting manufacturer. All retro reflective sheeting should be bubble free mechanically applied and

joint less up to size 1220 X 900 mm.

Digitally signed by AMIT

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF ITAT , NEW DELHI

ABSTRACT OF COST

SI.No. DSR-2021/ Description of Item UNIT TOTAL RATE DSR AMOUNT MR AMOUNT

B) WATER SUPPLY AND INTERNAL DRAINAGE SYSTEM

1 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and

making good the same including testing of joints complete as per

direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

a) 18.8.1 15 mm nominal dia Pipes Mtr. 20 441.15 8823.00

b) 18.8.2 20 mm nominal dia Pipes Mtr. 20 513.75 10275.00

c) 18.8.3 25 mm nominal dia Pipes Mtr. 10 626.05 6260.50

d) 18.8.4 32 mm nominal dia Pipes Mtr. 18 712.75 12829.50

2 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints complete

as per direction of Engineer in Charge.

Internal work - Exposed on wall

a) 18.7.1 15 mm nominal dia Pipes Mtr. 2 255.90 511.80

b) 18.7.2 20 mm nominal dia Pipes Mtr. 10 325.10 3251.00

c) 18.7.3 25 mm nominal dia Pipes Mtr. 10 408.55 4085.50

d) 18.7.4 32 mm nominal dia Pipes Mtr. 5 500.95 2504.75

e) 18.7.5 40 mm nominal dia Pipes Mtr. 15 674.35 10115.25

e) 18.7.6 50 mm nominal dia Pipes Mtr. 30 927.00 27810.00

3.00 MR Providing and fixing low noise insulated Polyproplene piping

system as per DIN EN 12056 and DIN1986-100 with 3 layer pipe

made of External layer -PP, middle layer-Mineral reinforced PP,

Internal layer-PP. push-fit type, food safe, having high impact and

stiffness, offering sound levels of not more than 10 dBA as per DIN

4109 at a flow rate of 2 l/s and having pipe ring stiffness as per

1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560,

density of pipe = 1.9 g/cm3, elongation break 50% and tensile

strength 20 N/mm2,Coefficient of linear expansion 0.09 mm/mK

with all necessary fittings fitted with factory fitted lip ring including

cutting and making good the walls, floors, R.C.C. work etc or also

incluiding painting with ordinary cement based paint for external

installation. (including MS structural support & U clamps as

a) 110 OD mm dia Pipes Metre 50 1811.00 0.00 90550.00

b) 75 OD mm dia Pipes Metre 80 1166.00 0.00 93280.00

4.00 MR Providing and fixing PP white Trap with minimum 50mm water seal

with rubber seal on inlet to push fit hopper for indirect waste

a) 110 mm inlet & 110 mm outlet Long ht Each 2 1505.00 0.00 3010.00

TOTAL FOR DRAINAGE 90123.00 186840.00

GRAND TOTAL (A+B) 90,123.00 186,840.00

GRAND TOTAL (A+B) 90,123.00 186,840.00

Digitally signed by AMIT

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF

PROJECT:PROPOSED ELECTRICAL ESTIMATE FOR CONSTRUCTION OF INCOME TAX OFFICE

NAME OF WORK - INTERNAL ELECTRIFICATION WORK WITH AC LIGHTING AND WITHOUT LIGHTING CONTROL

Sr.N Rate as per

Sch.No. Qty Unit Amount Rate Amount

o. Particulars DSR

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

1 1.10.3 conduit, with modular switch, modular plate, suitable GI box 75 Nos. 1,467.00 110,025.00 - -

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable

etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 1.12 recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS 1110 Meter 334.00 370,740.00 - -

PVC insulated copper conductor single core cable for loop earthing as

Wiring for circuit/ submain wiring alongwith earth wire with the

4 1.14 following sizes of FRLS PVC insulated copper conductor, single core - - -

cable in surface/ recessed medium class PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper braid and

protected with PVC sheath in the existing surface/ recessed steel/ PVC

conduit as required.

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Supplying and fixing following modular switch/ socket on the

7 1.24 existing modular plate & switch box including connections but - - -

excluding modular plate etc. as required.

a 1.24.6 Telephone socket outlet 52 Each 148.00 7,696.00 - -

b 1.24.7 TV socket outlet 3 Each 148.00 444.00 - -

c RA-1 RJ45 socket cat 6 with shutter 180 Each - 475.83 85,649.99

Supplying and fixing two module stepped type electronic fan

8 1.25 regulator on the existing modular plate switch box including 0 Each 369.00 - - -

connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith

9 1.27 modular base & cover plate for modular switches in recess etc. - - -

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 3 pin 5/6 A

modular socket outlet and 5/6 A modular switch, connections etc. as

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 A modular socket outlet and 15/16 A modular switch, connections

etc. as required.

Supplying and fixing brass batten/ angle holder including

connection etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling

fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps

per fitting, complete with all accessories including connections etc. as

Supplying and fixing stiff pendent with 300 mm long, 20 mm dia X 1.6

14 1.36 mm thick steel conduit, aluminium cast back plate and brass holder 4 Each 304.00 1,216.00 - -

complete, including wiring the down rod with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and painting etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase,

230 V, complete as required.

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15

mm dia, heavy gauge including painting etc. as

required. (Note : More than 5 cm length shall be rounded to the nearest 10

cm and 5 cm or less shall be ignored)

Installation of exhaust fan in the existing opening, including

17 1.50 making good the damage, connection, testing, commissioning - - -

etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a

exhaust fan of all sizes.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing

surface/ recessed Steel/ PVC conduit as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point ( without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Digitally signed by AMIT

Supplying and fixing suitable size GI box with modular plate and cover in

21 1.56 front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 75 Each 676.00 50,700.00 - -

A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc.

as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and

cover in front on surface or in recess including providing and

fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve

including connections, painting etc. as required.

Supplying and fixing PVC batten/ angle holder including

connections etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with

connections, testing and commissioning etc. as required.

b 2.10.3 Double pole 0 Each 656.00 - - -

c 2.10.5 Triple pole and neutral 5 Each 1,228.00 6,140.00 - -

Supplying and fixing following rating, double pole, (single phase

and neutral), 240 V, residual current circuit breaker (RCCB),

26 2.14 having a sensitivity current 30 mA in the existing MCB DB - - -

complete with connections, testing and commissioning etc. as

Supplying and fixing 40/63A rating, 415 V, 10 kA, "C" curve, miniature

circuit breaker suitable for inductive load of Four poles in the existing

MCB DB complete with connections, testing and commissioning etc. as

required. Similar to Legrand DX3 AC MCBs or equivalent.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with

cover plate having locking arrangement and watering pipe of

2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm

DSR 2022 thick including accessories, and providing masonry enclosure

5.6 with cover plate having locking arrangement and watering pipe

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.

30 5.11 pipe from earth electrode including connection with G.I. nut, 80 Meter 706.00 56,480.00 - -

bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre

below ground as strip earth electrode, including connection/

32 terminating with nut, bolt, spring, washer etc. as required. 95 Meter 972.00 92,340.00 - -

(Jointing shall be done by overlapping and with 2 sets of brass

nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess

33 5.18 for loop earthing along with existing surface/ recessed conduit/ 50 Meter 42.00 2,100.00 - -

submain wiring/ cable as required.

SITC of Glasso Deep Recessed LED Downlight

with maximum 12Watts Lumens 1500 cob base having non Intergral

isolated driver with 2kv surge protection 230V with CRI>90, Beam Angle

15Deg , 24Deg , 36Deg and 60Deg color temperature

3000K/4000K/5700K, IP20, IK04, operating voltage range 140-270Vac,

temperature -10° to 45°C, PF>0.95, THD<10%, product

efficacy>110lm/W, SDCM<5,

L70B50@50000hrs, LED binning as per ANSI Bin C78.377A, 110° shall

be luminaire beam

angle, drivers efficiency >86%, internal surge protection of >2.5kV, LED

make - Bridgelux,

Seoul, Osram, Cree, The manufacturer shall provide LM79, LM80,

TM21, Photoboilogical

safety as per IEC 62471, RoHS complaint, BIS both for fixture and drivers.

SITC of Fixed Deep Eye Recessed LED Downlight

with maximum 12Watts 1500 LM cob base having non Intergral isolated

driver with 2kv surge protection 230V with CRI>90, color temperature

3000K/4000K/5700K, IP20, IK04, operating voltage range 140-270Vac,

operating temperature -10° to 45°C, PF>0.95, THD<10%, product

35 MR efficacy>100lm/W, SDCM<3, 30 Each - 3,835.00 115,050.00

L70B50@50000hrs, LED binning as per ANSI Bin C78.377A, 110° shall

be luminaire beam angle 60Deg, drivers efficiency >86%, internal surge

protection of >2.5kV, LED make - Bridgelux,

Seoul, Osram, Cree, The manufacturer shall provide LM79, LM80,

TM21, Photoboilogical

safety as per IEC 62471, RoHS complaint, BIS both for fixture and drivers.

Digitally signed by AMIT

SITC of Down Light Round adjustable recessed 12Watts LED Double

optical system with lens and reflector to improve the visual comfort

complete with LED lamp. (White Fixture with White Reflector). Life time

50.000h . Body in die-cast Aluminium Complete with LED Lamp

.CRI>90,3000K/4000K/5700K, IP20, IK04, operating voltage range 140-

270Vac, operating temperature -10° to 45°C, PF>0.95, THD<10%,

L70B50@50000hrs, LED binning as per ANSI Bin C78.377A, 110° shall

be luminaire beam angle 36Deg, drivers efficiency >86%, internal surge

protection of >2.5kV, LED make - Bridgelux,

Seoul, Osram, Cree, The manufacturer shall provide LM79, LM80,

TM21, Photoboilogical

safety as per IEC 62471, RoHS complaint, BIS both for fixture and drivers.

SITC Recessed downlightwith HPE (High-Performance Efficiency) with

LED (Light Emitting Diode), system power: 12 W, Luminous flux of

luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of

37 MR 4000 K, Neutral white, CRI > 80, 230V constant current driver, 70% of 10 Each - 2,596.00 25,960.00

luminous flux after 50,000 operating hours; energy-efficient LEDs, direct

light emission, housing in die-cast aluminium, Polyester powder white

coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser

for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear,

SITC of Fixed Deep Eye Recessed LED Downlight

with maximum 7Watts 800 LM cob base having non Intergral isolated

driver with 2kv surge protection 230V with CRI>90, color temperature

3000K/4000K/5700K, IP20, IK04, operating voltage range 140-270Vac,

operating temperature -10° to 45°C, PF>0.95, THD<10%, product

38 MR efficacy>100lm/W, SDCM<3, 20 Each - 2,065.00 41,300.00

L70B50@50000hrs, LED binning as per ANSI Bin C78.377A, 110° shall

be luminaire beam angle 60Deg, drivers efficiency >86%, internal surge

protection of >2.5kV, LED make - Bridgelux,

Seoul, Osram, Cree, The manufacturer shall provide LM79, LM80,

TM21, Photoboilogical

safety as per IEC 62471, RoHS complaint, BIS both for fixture and drivers.

SITC of 2'X2' recessed mounted Luminaire with Maximum 36 Watt with

Lumen output of 3600 lumen. The product should be SMD based and

have non integral isolated driver with 2KV inbuilt surge protection.

39 MR THD<10%, PF >0.9,Product should have life class of 50K burning hour at 11 Each - 7,080.00 77,880.00

L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring

should have teflon coted multi strand wires and external wire should have

PVC coated multistrand wires.

SITC Customised Skylight Ceiling with highquality PVC film

47 MR ceiling installation for LED And Fabric Only Beam Angle:120°, included 10 Each - 2,065.00 20,650.00

with Non Dimmable Power Supply.

SITC Wooden Floor Lamp is a versatile and elegant lighting fixture

designed for office applications It features a premium wooden finish

natural with visible wooden grains brass base The adjustable head allows

for precise light placement, making it perfect as a reading lamp or a

focused work light in any office setting. Integrated LED color temperature

SITC Customised Acoustic 450mm Hanging Light is a functional and

decorative lighting fixture designed to enhance acoustic performance while

providing high-quality illumination. Ideal for offices, meeting rooms, and

commercial spaces, it combines sound-absorbing properties with modern

lighting aesthetics. Diameter: 550mm Color Temperature: Available in

3000K (Warm White), 4000K (Neutral White), and 6000K (Cool White)

CRI: ≥90 Suspended with adjustable steel cables (length customizable)

SITC Customised Linear Light 35mm Wide Modular System features an

innovative design with anti-glare spots and diffused linear lighting for

superior performance and visual comfort. The system combines linear

diffused light (1547mm) with a Blanker 500mm spot, offering tool-free

installation and future replacement capabilities. Mounting Options:

Suspended, Surface-mounted, or Recessed Size Options: 2ft, 4ft, 6ft, 8ft,

and 12ftLinkable: Ultra-long single-end power for seamless continuous

55 MR runs Power Supply: Inbuilt for easy integration Diffuser: Snap-fit design 6 Each - 14,750.00 88,500.00

for easy maintenance Power: 30W (linear) + 10W (spot)Voltage: 230V

Color Temp: 3000K/4000K/5700K CRI: >80 Beam Angle: Diffused

Efficacy: >100lm/W Operating Voltage: 140-270V Operating Temp: -

10°C to 45°C IP Rating: IP20, IK04 Surge Protection: >3.5kV LED:

Bridgelux, Seoul, Osram, Cree

SITC Customised High-Efficiency Inward Curved Deep Linear LED

Fixture is designed for glare-free, high-output lighting ideal for office and

general applications. Featuring a deep inward curve (Min 15-20mm), it

ensures uniform light distribution without hotspots. Mounting Options:

Suspended, Surface-mounted, or Recessed Size Options: 2ft, 4ft, 6ft, 8ft,

and 12ft Linkable: Ultra-Long Single-End Power in Allows seamless

continuous runs Power Supply: Inbuilt for easy integration Diffuser: Snap-

fit for maintenance Aesthetic: Premium wooden finish with visible grains

Specifications: Power: 40W Voltage: 230V Color Temp:

3000K/4000K/5700K CRI: >80 Beam Angle: Diffused Efficacy:

>100lm/W Operating Voltage: 140-270V Operating Temp: -10°C to 45°C

IP Rating: IP20, IK04 Surge Protection: >3.5kV LED: Bridgelux, Seoul,

59 MR SITC Decorative Lights as per the approval of engineer in charge. 2 Each - 53,100.00 106,200.00

62 MAIN L.T PANEL - - -

Digitally signed by AMIT

Design, Manufacturing, Supply, Commissioning & Testing of Main LT

Panel. The panel will be totally enclosed type with, free standing, floor

mounted, indoor duty, dust & vermin proof, , front operated, electrical

panel fabricated from 2 mm thick M.S. Sheet as per specifications &

drawing laid in this document and will be complete with the main and

auxiliary bus bars, multimeter, indication lamps, CT's, protection MCB,

interconnection wiring, earth bus and will be powder coated finish with 50

micron thickness.

The Main LT Panel shall use all draw out type breakers suitable for 415 V

AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have

AMF facility to achieve electrical interlocking, synchronizing, buscoupler

switching, auto operation of incommer and bus coupler, auto start of D.G.

Sets, auto D.G. running by pre set timing, auto changeover etc and having

following incomming and outgoing Air Circuit Breakers, FSU's as per the

drawing and specification. Each incoming breaker will have

microprocessor based releases and all outgoing breaker will have

minimum electrostatic releases over 250A & thermal magnetic release

below 250A. The Panel will be made as per detailed specifications &

drawings forming part of this document. Fault level of panel shall be 35

250Amp. 16KA FP With S/C, U/V, E/F Protection MCCB-1 no. - - -

100Amp. 16KA FP With S/C, U/V, E/F Protection MCCB-1 no. - - -

100Amp. 16KA FP ATS - - -

BUSBARS - - -

1 Nos. 320 Amp FP busbars of aluminium alloy as per SLD. - - -

1 Nos. 160 Amp FP busbars of aluminium alloy as per SLD. - - -

OUTGOING - - -

32Amp. 10KA FP MCB 6 No. - - -

63Amp. 10KA FP MCB 6 No. - - -

63Amp. 10KA FP MCB+300mAmp FP RCCB 5 No. - - -

100Amp. 10KA FP MCCB 1 No. - - -

INSTRUMENTS - - -

2 sets of multifunction meter with parameter

current,voltage,KWH,KVAH,Power factor on incoming from transformers - - -

with RS 485 port.

2 Sets of phase indicating lights (RYB) with protection fuses (one set for

each incoming breaker).

2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming

2 Sets auto trip indicating lamp . - - -

63 UPS INPUT PANEL - - -

Design, Manufacturing, Supply, Commissioning & Testing of Main LT

Panel. The panel will be totally enclosed type with, free standing, floor

mounted, indoor duty, dust & vermin proof, , front operated, electrical

panel fabricated from 2 mm thick M.S. Sheet as per specifications &

drawing laid in this document and will be complete with the main and

auxiliary bus bars, multimeter, indication lamps, CT's, protection MCB,

interconnection wiring, earth bus and will be powder coated finish with 50

micron thickness.

The Main LT Panel shall use all draw out type breakers suitable for 415 V

AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have

AMF facility to achieve electrical interlocking, synchronizing, buscoupler

switching, auto operation of incommer and bus coupler, auto start of D.G.

Sets, auto D.G. running by pre set timing, auto changeover etc and having

following incomming and outgoing Air Circuit Breakers, FSU's as per the

drawing and specification. Each incoming breaker will have

microprocessor based releases and all outgoing breaker will have

minimum electrostatic releases over 250A & thermal magnetic release

below 250A. The Panel will be made as per detailed specifications &

drawings forming part of this document. Fault level of panel shall be 35

100Amp. 16KA FP With S/C, U/V, E/F Protection MCCB-1 no. - - -

BUSBARS - - -

1 Nos. 160 Amp FP busbars of aluminium alloy as per SLD. - - -

OUTGOING - - -

100Amp. 10KA FP MCB 3 No. - - -

INSTRUMENTS - - -

1 sets of multifunction meter with parameter

current,voltage,KWH,KVAH,Power factor on incoming from transformers - - -

with RS 485 port.

1 Sets of phase indicating lights (RYB) with protection fuses (one set for

each incoming breaker).

1 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming

1 Sets auto trip indicating lamp . - - -

64 UPS OUTPUT PANEL - - -

Design, Manufacturing, Supply, Commissioning & Testing of Main LT

Panel. The panel will be totally enclosed type with, free standing, floor

mounted, indoor duty, dust & vermin proof, , front operated, electrical

panel fabricated from 2 mm thick M.S. Sheet as per specifications &

drawing laid in this document and will be complete with the main and

auxiliary bus bars, multimeter, indication lamps, CT's, protection MCB,

interconnection wiring, earth bus and will be powder coated finish with 50

micron thickness.

Digitally signed by AMIT

The Main LT Panel shall use all draw out type breakers suitable for 415 V

AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have

AMF facility to achieve electrical interlocking, synchronizing, buscoupler

switching, auto operation of incommer and bus coupler, auto start of D.G.

Sets, auto D.G. running by pre set timing, auto changeover etc and having

following incomming and outgoing Air Circuit Breakers, FSU's as per the

drawing and specification. Each incoming breaker will have

microprocessor based releases and all outgoing breaker will have

minimum electrostatic releases over 250A & thermal magnetic release

below 250A. The Panel will be made as per detailed specifications &

drawings forming part of this document. Fault level of panel shall be 35

100Amp. 16KA FP With S/C, U/V, E/F Protection MCCB-2 no. - - -

BUS COUPLER - - -

100Amp. 16KA FP With S/C, U/V, E/F Protection MCCB-1 no. with

electrical interlocking of incomer

BUSBARS - - -

2 Nos. 125 Amp FP busbars of aluminium alloy as per SLD. - - -

OUTGOING - - -

63Amp. 10KA FP MCB 8 No. - - -

INSTRUMENTS - - -

2 sets of multifunction meter with parameter

current,voltage,KWH,KVAH,Power factor on incoming from transformers - - -

with RS 485 port.

2 Sets of phase indicating lights (RYB) with protection fuses (one set for

each incoming breaker).

2 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming

2 Sets auto trip indicating lamp . - - -

Supply Installation testing and commissioning of Star Delta Starter

Suitable for 35-50 KW starter with Potential free contact, type-2

coordination and metering etc as required for AHU including all necessary

Supply Installation testing and commissioning of Star Delta Starter

Suitable for 10-15 KW starter with Potential free contact, type-2

coordination and metering etc as required for Axial Flow Fan including all

necessary items..

Supplying and installing following size of perforated painted with powder

coating M.S. cable trays with perforation not more than 17.5%, in

67 convenient sections, joined with connectors, suspended from the ceiling - - -

with M.S. suspenders including bolts & nuts, painting suspenders etc. as

a 4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness 100 Meter 543.00 54,300.00 - -

b 4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness 20 Meter 777.00 15,540.00 - -

Supply of Power Cables,Solid Aluminum conductor up to 10 sqmm

balance stranded conductor,XLPE Insulated,cores laid up, PVC tape

68 MR innersheathed,unarmoured/Armour(Aluminium wire for single core up to - - -

70 sqmm balance Aluminium strip, Glavanised wire for cables upto 2x16

sqmm, 3x10 sqmm & balance all galvanised steel strip),extruded PVC

Type ST2 sheathed,650/1100V grade as per IS 7098(Part 1) 1988

a RA-9 3.5CX25Sq.mm Cable Cu. Flex. 5.0 m - 2,331.58 11,657.89

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated

and PVC sheathed / XLPE CU conductor cable of 1.1 KV

grade as required.

Laying and fixing of one number PVC insulated and PVC

70 7.8 sheathed / XLPE power cable of 1.1 KV grade of following size - - -

on cable tray as required.

b 7.8.2 Above 35 sq. mm and upto 95 sq. mm Meter 92.00 - - -

c 7.8.4 Above 185 sq. mm and upto 400 sq. mm 10.0 Meter 185.00 1,850.00 - -

Raceway Work - - -

Supply Installation testing and commissinoning of GI racewayin floor

similar to Legrand or equivalent.

a RA-13 100 mm x 38 mm - 1 compartment 80 Meter - 1,436.05 114,884.15

b RA-14 150 mm x 38 mm - 1 compartment 50 Meter - 1,881.57 94,078.51

c RA-15 300 mm x 38 mm - 3 compartments 25 Meter - 3,378.02 84,450.54

72 Supply and Fixing bracket (GI) - - -

Supply Installation testing and commissinoning of GI raceway riser in floor

similar to Legrand.

RA-19 Vertical - for 300 mm width raceways 45.00 Each - 2,513.16 113,092.27

Supply Installation testing and commissinoning of Junction box For direct

74 acess to cables at the intersection of raceways Supplied completely with - - -

base and cover plate (Lid)

Fire Suppression System - - -

Digitally signed by AMIT

2kg capacity seamless Alluminium cylinder Paso approved stored pressure

type clean agent fire extinguisher alongwith all necessary fitting filled with

clean agent FK-5-1-12 complete having operating pressure between 15

bar etc. as required UL & FM listed gas.

SITC of Pneumatic Heat detection tube red color made by special

modified polyamide (PA), UL and LPCB standard, having burst

77 MR temperature 100°C to 120°C, inner diameter 4 mm, outer diameter 6 mm, 40.0 Meter - 2,454.40 98,176.00

pressurized with nitrogen at 15 bar pressure for automatic detection and

suppression system

SITC of End of line adapter along with pressure gauge working pressure

25 bar. UL approved.

SITC of End of Line Plug for automatic fire suppression System used for

79 MR fitting at tube end to terminate the point. Fitting made by brass nickel 1 Each - 6,442.80 6,442.80

plated material. UL approved.

80 MR SITC of Pressure Switch at 15 bars. UL approved. 2 Each - 11,658.40 23,316.80

SITC of Master Control Unit micro processor based 4 zone inbuilt GSM

dialer audio visual alarm control panel, 2NO/NC potential free relay

81 MR contacts discharge LED indicator, battery LED indicator, system status 2 Each - 25,311.00 50,622.00

indicator and AC power ON LED indicator with inbuilt battery backup

SITC Supply of 80 Itr. Cylinder PESO Approved, complete with valve

assembly and including necessary accessories like high pressure

manual release, Solenoid valve for actuation and Rigid Hose as required to

complete the system.(For UPS & Server Room)

84 MR SITC Cylinder Clamp 1.00 Nos - 3,776.00 3,776.00

SITC of Piping as required, Sch 40; ASTM A106 Gr B, as per flow

calculations for the specific hazard volume and stand to hold,

position & Support the Piping properly. Also including single cylinder

wall fixing barrackets with C chanel duly painted.

SITC of Piping as required, Sch 80; ASTM A106 Gr B, as per flow

calculations Maniflod pipe.

87 MR SITC ofDischarge Pressure Switch. 1.00 Nos - 8,850.00 8,850.00

88 MR SITC of Nozzles, 360 Deg / 180 Deg Throw. 4.00 Nos - 5,310.00 21,240.00

Grand Total (DSR+MARKET BASED ITEM) 6,652,893.14

Grand Total (DSR+MARKET BASED ITEM) 6,652,893.14

Digitally signed by AMIT

PROJECT: INCOME TAX ITAT

S.NO Sch.No. DESCRIPTION TOTAL QTY UNIT Rate Amount Rate Amount

1 1 VRV Out Door units :

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for

above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s),

with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required.

The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient

temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase,

50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for

use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.

(Design should be got approval before execution from engineer in charge)

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

2 2 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature. fresh air provision compatible for Remote Operation System .

Supply, installation, testing and commissioning of following minimum capacity 1-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

3 MR single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

temperature. fresh air provision compatible for Remote Operation System .

Digitally signed by AMIT

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

4 4.1 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, No. 1 21,746.00 21,746.00

complete as required. The unit shall have automatic force shut down provision in case of fire on

receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature-1.65 TR

Supply,Installation,testing and commissioning of corded Cord type remote control with Nos.

thermostat, LED Display and internal wiring for 1Way & 4way Cassette & hi-wall .

6 MR Supply,Installation,Testing & Commissioning of Y Joints-Indoors Nos. 25.0 5,820.20 145,505.00

7 MR Supply,Installation,Testing & Commissioning of Y Joints-outdoors Nos. 4.0 6,627.10 26,508.40

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

9 5 including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 60 245.00 14,700.00

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 90 331.00 29,790.00

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 70 466.00 32,620.00

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 110 588.00 64,680.00

9.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 40 707.00 28,280.00

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 60 865.00 51,900.00

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Rmt 60 1,108.00 66,480.00

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation Rmt 60 1,230.00 73,800.00

41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation Rmt 50 1,309.00 65,450.00

Digitally signed by AMIT

Supply installation testing commissioning Shielded Control Cables for VRV System with necessary

ISI mark Medium class rigid PVC pipes with necessary accessories with termination in machine

10 MR and control equipments.

10.1 (A) 2Cx1.5 Sq mm Shielded Armoured(for communication lead & remote ) Rmt 590 189.20 111,628.00

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

11.1 3C x 2.5 sq.mm FOR INDOOR UNIT POWER CABLE Rmt 510 210.50 107,355.00

12 MR Drain Piping :

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation.

VRV Unit Panel-FOR OUTDOOR UNITS & FANS

13 MR Supply,installation,testing and commissioning

alised floor/wall mounted type made of 2 mm thick

steel sheet duly painted complete as per the

specifications and drawing and as detailed below :

1 no.240 Amps TPN MCCB incomer with KWH

meter, phase indicating lamps with control fuse &

toggle switch, voltmeter and selector switch, ammeter

with CTs and selector switch

6 nos. of 40 Amps TPN MCB outgoing for VRV OD units with star delta starter

4 nos. of 63 Amps TPN MCB outgoing for VRV OD units with star delta starter Nos. 1 182,600.00 182,600.00

Supply,installation,testing and commissioning of Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road crossing or floor of following size of cable.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

15 MR for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size

Digitally signed by AMIT

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The

cable tray should be single or double bended as per required and as per IS 2062/1079 and shall

be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with

necessary support( included) as per Specification and as per instruction of engineer in charge..

17 MR Earthing :

Supply,installation,testing and commissioning of following double earthing continuity conductor

of Cu from Panels to respective equipment on surface or recess as per drawings and

specifications.

17.3 c) 50sq mm ( for earthing) Rmt 80 202.50 16,200.00

Supply, installation, testing and commissioning of High Wall Indoor Unit with Stablizer, 3

18 M.R. star, including cost of copper piping (upyo 15 mtr, drain pipe wire and remote)

MR High Wall - 2 Tr (Compressor with stablizer) Nos 1 72000.00 72,000.00

MR SITC of Copper Pipe for 2 Tr AC RMT 100 1800.00 180,000.00

Digitally signed by AMIT

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF

PROJECT:PROPOSED ELECTRICAL ESTIMATE FOR CONSTRUCTION OF INCOME TAX OFFICE

NAME OF WORK - UPS SYSTEM

Sr.No. Particulars Sch.No. Qty Unit Amount Rate Amount

1.0 SUB HEAD-I :-MODULAR UPS WITH Li-ion BATTERIES

Supply, Installation, Testing and Commissiong of High Efficient 60kVA/60 KW Model IGBT Rectifier & IGBT

Inverter, Modular Fault Tolerant designFailure in any one of the module the others keeps supplying to the load

without interruption. Approved Make, 12V VRLA Batteries, 65 AH or saiuitable for 30 minutes backup.

Including Auto Phase reversal and all other protection devices, Exide (40 nos on each bank) Make Exide,

Accessories ( Cabling between UPS and the Battery upto 10 Mtr distance for each UPS considering cable

Routing,Battery Rack and Battery Interlinks, lugs etc ) DC MCCB between UPS and Battery complete in all

respect as per the directions of engineer in charge. UPS shall produce 30 minutes backup.

UPS described as above MR Set 1 1,553,765.00 1,553,765.00

Digitally signed by AMIT

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF CESL, NEW DELHI

ABSTRACT OF COST

WORK: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

I.NO DSR CODE DESCRIPTION UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per

manufacturer's specifications.

Providing & fixing of CO2 High Pressure trolley mounted 6.5 kg Fire Extinguisher, filled with Co2 Gas as

per IS 15222, Gross Weight 23 Kg, empty weight 16.5 Kg, Control discharge mechanism fitted with 2

Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge

Time 25 Sec, Average Discharge is 95%, applicable on Class B, C and electrically started Fire, Internal

coating is not applicable & External coating is of enamel spray painting, Valve Confirm to IS 3224 ISI

Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to

IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 16018:2012 and ISI maked. Fire Rating: 55B

Providing and fixing of Water type cartridge operated 9 ltr. Fire Extinguisher. Applicable fire class

A,UTGS Pressure Gauge, Gross Weight 13 Kg, empty weight 5.3 Kg, Can Height 585mm, Diameter 180 ±

10mm, Discharge Time 35 Sec, Controllable discharge mechanism, Jet Range 7 Meters, Average

Discharge is 95%, Fire Rating- 3A, Can Construction : Deep drawn & CO2 Mig welded, CE Marked Valve

with inbuilt NRV & Safety Release Provision, Controllable discharge mechanism with EPDM Hose &

Nozzle, CO2 gas Cartridge of 60 gm. Internal Plastic Lining and External Coating - Pure Polyester Powder

coating (UV Resistant), Made up of 2 mm Sheet, As per IS 5683:2018 and ISI Marke

c) MR ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 8 4746.13 37969.00

Fire Fighting CLA Digitally signed by AMIT NBCC

Detailed Estimate

Proposed Office BuildingITAT

Name of Work: Access Control System Work.

S NO DSR DESCRIPTION UNIT NTIT RATE TOTAL AMOUNT

S NO DSR DESCRIPTION UNIT NTIT RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

1 MR Supply, Installation, Testing and Commisioning of smart card reader Nos 6 8,532.00 51,192.00

Supply Installation Testing & Commissioning of Access Control Software Multi Reader and

controller confuguration and upgradable to Enterprise level with unliimited users. Databse

Supports: MS SQL, Oracle, and MS Access database types. Type of technology supports: IRIS

2 MR Sacnner, Biometric, Face, RFID , etc supports template management , Highly secured Nos 1 76,125.00 76,125.00

communication with server,Allows for real- time monitoring of system status and user activities

with optional audio alerts. tamper detection, network communication loss, and many other system

SITC of Access IP Master Controller with Enclosure & Power Supply- 1 door Universal 2 Reader

TCP/IP Controller Expandable upto 4 Reader with exit reader module,4 Programmable inputs & 4

outputs 100 mA MAX ),Temperature: 0 to 70°C (35 -150°F); Humidity: 20 to 80% RH (non-

condensing) , 3000 USERS & 3000 transactions,2 Reader.

Supply, Installation, Testing & Commissioning of 12V, 5 Amp. SMPS with MS Box Certified.

Supply, Installation, Testing & Commissioning of Smart card Frequency Excitation (13.56 MHz)

5 MR Mifare/I- class technology smart Card. Memory Type EEPROM,Complies with ISO/IEC standards Nos 8 153.00 1,224.00

for thickness. Lifetime Warranty.

Supply Installation Testing and Commissioning of double leaf 600 LBS Door Electro Magnetic

Lock with complete compatiable Bracket UL Listed.

Supply Installation Testing and Commissioning Touchless Request to Exit button with detection

range from 4 to 12 cm.

Supply Installation Testing and Commissioning Fire Exit panic Bar single/double Door with EM

lock and requiredaccessories all includes.

Supply Installation Testing and Commissioning Emergency Door Release Button, Gree, Key

Resettable, DoublePole Double Throw.

10 DSR 1.53.1 Supply Installation Testing and Commissioning of Cat 6 Network cable. Mtr 1000 57.00 57,000.00 -

11 MR Supply Installation Testing and Commissioning of 8 Core-conductor20 to 22 AWG. Mtr 300 67.00 20,100.00

Supply Installation Testing and Commissioning of AC 3 Core Plain Copper conductor, PVC

Supplying and fixing of following sizes of medium class PVC conduit along with

13 MR accessories in surface/recess including cutting the wall and making good the same in case of

recessed conduit as required

Digitally signed by AMIT

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF ITAT , NEW DELHI

ABSTRACT OF COST

NAME OF WORK - FIRE ALARM &PA

I.NO DSR CODE DESCRIPTION UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

SH 1.00 FIRE ALARM

1.0 Supplying, installation, testing & commissioning of intelligent analog addressable EACH 65.00 2858.00 185770.00 0.00

17.2.4 photothermal detector complete with mounting base complete as required.

2.0 Supplying, installation, testing & commissioning of response indicator on EACH 52.00 276.00 14352.00 0.00

17.2.5 surface/recessed MS Box having two LED, metallic cover complete with all

connections etc as required.

3.0 Supplying, installation, testing & commissioning of intelligent addressable EACH 5.00 2726.00 13630.00 0.00

17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor complete

with base as required.

4.0 Supplying, installation, testing & commissioning of fault isolator complete with EACH 15.00 3270.00 49050.00 0.00

base as required.

5.0 Supplying, installation, testing & commissioning of addressable fire control EACH 3.00 3003.00 9009.00 0.00

module complete as required

6.0 Supplying, installation, testing & commissioning of addressable phone control EACH 6.00 3267.00 19602.00 0.00

module complete as required.

8.0 Supplying, installation, testing & commissioning of addressable horn cum strobe EACH 6.00 3506.00 21036.00 0.00

complete as required.

9.0 Supplying, installation, testing & commissioning of addressable manual call point EACH 6.00 3871.00 23226.00 0.00

complete as required.

10.0 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller EACH 1.00 126411.00 126411.00 0.00

with USB, MP3 player (including 6 zone button paging station) with seamless

integration facility with main fire alarm panel for voice evacuation complete as

11.0 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated Meter 600.00 173.00 103800.00 0.00

with annealed copper conductor having XLPE insulation, steel wire armouring &

FRLS outer sheath complete as required

12.0 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all Meter 500.00 53.00 26500.00 0.00

ancillaries and accessories like coupler etc. as required.

13.0 Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs EACH 8.00 3870.00 30960.00

power Battery backup complete as required.

CLA Digitally signed by AMIT NBCC

14.0 Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 EACH 1.00 92150.00 92150.00

detectors For BMS Fire integration compatible with existing system

15.0 Supply, Installation, Testing and Commisioning of Interface Card for BMS fire EACH 2.00 55500.00 111000.00

integration compatible with exisiting system

16.0 Supply, Installation, Testing and Commisioning of repeater panel having 640 EACH 1.00 90000.00 90000.00

MR character liquid crystal with backlit control compatible with existing system

Note - item to be applicable in urban areas having directions for restricted hours

for movement/ plying of load carrying motor vehicle of 3.5 cum or more.

Total Carried Over to Abstract for Sub Head: 1.00 Fire Alarm : 592386.00 324110.00

SH 2.00 PA SYSTEM

1.0 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker EACH 45.00 965.00 43425.00 0.00

complete as required.

1.0 Supplying, installation, testing & commissioning of digital audio amplifier 150 EACH 1.00 74598.00 74598.00

MR Watt, 25V rms operating at 240 Volt AC Supply complete as required.

1.0 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor

cable in the existing surface / recessed steel conduit of following pairs, cores and

size including connections and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm METER 600.00 89.00 53400.00 0.00

1.0 Supplying, installation, testing & commissioning of Voice command keypad 6 EACH 1.00 81756.00 81756.00 0.00

zone, with microphone assembly complete as required.

Total Carried Over to Abstract for Sub Head: 2.00 Pa System : 178581.00 74598.00

CLA Digitally signed by AMIT NBCC

DETAILED ESTIMATE FOR PROPOSED CONSTRUCTION OF GAIL OFFICE , NEW DELHI

ABSTRACT OF COST

NAME OF WORK -CCTV

SI.NO DSR UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

1 MR Supply, Installation, testing & Commissioning of outdoor inbuilt IR, IP based DOME No's 6 12,500.00 75,000.00

camera on wall/pole with mounting accessories and made up of Aluminium

having following specifications with BIS certification clearly mentioning the R number

of the product etc as required and as per terms and condition of the agreement.

Minimum 4 Megapixel Resolution Full HD or better Ethernet- 10 Base T/ 100 Base TX/RJ

CCTV WORK CLA Digitally signed by AMIT NBCC

2 MR Supply, Installation, Testing & Commissioning of 8 Channel IP network video recording No's 1 61,000.00 61,000.00

capability Rack mount NVR with Redundant Power Supply and minimum 8 Slots, should

support H.264/H.265 compression, network incoming throughput of 850 Mbps and 4MP

recording resolution, time division multiplexing, real time recording of multiple cameras,

storing digitized and compressed images on internal hard disk drives for fast search and

retrieval either locally at the unit, or from a remote workstation using a Graphical User

Interface (GUI), should allow all connected cameras to be discovered and configured

automatically, simultaneous live view, record, play back, data transmission in real time,

maximum throughput of 400 Mbps, UHD 1920 ips, support H.264/H.265 compression,

2X – 12X digital zoom in live view mode, 2X – 12X digital zoom in playback mode, time

lapse, event, time lapse + event, pre / post-event, panic recording schedule, recording

bitrate control mode: CBR and VBR, alarm, audio, motion, trip zone, video loss, text-in,

system event triggering, fan error, record failure, storage related alerts and alarm in

error, email, remote notification (call back) to remote work stations, mobile device push

notification, Time-lapse, Event log, Motion, Thumbnail, Text-in search options, SSL,

Password encryption options, network keyboardfor controlling the NVR and PTZ, 1

Gigabit Remote Client port, 4 Gigabit ports, ONVIF compliant , output interface 1 HDMI

(up to 4K), 2 internal SATA ports (10TB per SATA) with recording capacity up to 20 TB or

more. etc complete as per specifications of this and directions of Engineer-in-Charge.

3 MR SITC of 10 TB Surveillance Hard Drive, With a workload rating of up to 180 TB/yr, built for No's 1 30,200.00 30,200.00

always-on, 24/7, high-definition surveillance systems etc all complete

IP CCTV and Suvilliance Solution 166,200.00

CCTV WORK CLA Digitally signed by AMIT NBCC

S.No. Item Specifications Qty CR1 Rate Amount

Conference Room

Supply, Installation, testing and commissioning of 98" UHD

Signage/Professional Display|500 Nits Brightness |50000:1 Contrast

Ratio|Operation: 24x7|1xVGA;

1xDP, 2xUSB 2.0 , 4x HDMI 2.0 In, Secure USB 2.0 (Internal), RJ45, RJ12,

RS232, Optical SPDIF |1xHDMI 2.0, 1xDP Out, Supports Daisy Chain|

1 99" Display Speaker 2x12 W | Open Content Management Support, Scheduler, USB 1 ₹ 1,050,000.00 ₹ 1,050,000.00

Autoplay, AutoLaunch, HDMI-CEC, HDMI-Wakeup, Auto-switch on Failover,

Panel Lock, OSD Rotation, NoSignalPowerOff, Screen Saver, Pixel shift,

Scheduler, Videowall support, Remote control via LAN, Realtime Clock,

Joystick, Rocker Switch| Optional : OPS compatibility

|Certifications: Safety, EMC, CE

Supply, Installation, testing and commissioning of 55 inch UHD

Signage/Professional Display|500 Nits Brightness |50000:1 Contrast Ratio |

Operation: 24x7|1xVGA; 2xUSB 2.0 , 4x HDMI 2.0 In, Secure USB 2.0

(Internal), RJ45, RJ12, RS232, Optical SPDIF|1xHDMI 2.0 out, Supports Daisy

Chain |Speaker 2x10 W|30-degrees Tilting Installation | Open Content

2 55" Display Management Support, Scheduler, USB-Autoplay, AutoLaunch, HDMI-CEC, 5 ₹ 105,500.00 ₹ 527,500.00

HDMI-Wakeup, Auto-switch on Failover, Panel Lock, OSD Rotation,

NoSignalPowerOff, Screen Saver, Pixel shift,Scheduler, Videowall support,

Remote control via LAN, Realtime Clock, Joystick, Rocker Switch| Optional :

SDM or OPS compatibility, Embedded IR, IR extender option | Optional:

Overlay Touch Kit Compatibility|Certifications: Safety, EMC, CE

Supply, Installation, testing and commissioning of Unified communication

bar with BYOD, Built-in dante integration, Should have Built-In DSP which

automatically optimizes room acoustics, Integrated Beamforming

microphone, 6 Nos. of MEMS capsules with pickup range of 4.5m or more,

All in One Should have 4K ePTZ camera, 5x digital zoom with automatic framing and

Video person tiling feature, Built-in Class D amplifier with 4 Nos. of 40W full range

Conferending speaker, should have 2 x HDMI, 1 x USB Type-C(3.1), 1 x USB Type-A(3.1), 2

Bar x1000/100/10 Mbit/s (RJ45) ethernet ports, 5.1 bluetooth and IEEE 802.11a

/b /g /n /ac Wi-fi standard, Zooms and Teams certified, High-precision audio

settings for maximum control, setting to exclude (min 3) and prioritize the

areas of the room, should be controlled through centralized monitoring

software along with IR remote control and mounting kit.

Supply of On-table condenser Cardioid boundary layer microphone with a

programmable microphone button (PTT, PTM, toggle on/off, permanent

on), and a bi-color LED ring for status indication, Frequency response: 40 Hz

– 20 kHz, Nominal impedance: 200 Ohm, Sensitivity: 10 mV/Pa, Maximum

sound pressure level: 140 dBEquivalent noise level: 29 dB (A). The

microphone should have a TTL logic connector with logic inputs and outputs.

Suppy Installation Testing and Commissioning of digital signal processor with

minimum 8no. Or more Mic / line input with phantom power and AEC and 8

or more line level output, 1no. Or more GPIO at least 2 channel of USB

input and output for software Video Conferencing, should have 64x64

Digital Signal channel of digital dante input output, Should have sampline rate of 48kHz or

Processor better, Should be expandable for port expansion, should support Control

with App via iOS and Android devices, or any third-party control system,

Shall have Built-in filters, feedback suppression, AGC single-device(chassis)

use is permitted, but the combination of devices is not accepted etc

complete as required as per specifications

Supply, Installation, testing and commissioning of 8 channel energy star

rated digital power amplifier,8 channel at 4 Ohm or 8 ohm energy-efficient

amplifier - 8 x 30W or more at 70/100V Technology : Class-D,Input linking

6 Amplifier through miniature switches, Switching mode power supply, Protection : DC 1 ₹ 285,320.00 ₹ 285,320.00

Short circuit & Over heating & Over load & Signal limiting, Frequency

Response 120 Hz - 20 kHz or better, Silent passive cooling etc complete

required as per specifications.

Digitally signed by AMIT

Supply, Installation, testing and commissioning of 6.5" two-way coaxial thin

edge ceiling loudspeaker having 100V transformer power taps from 60watts

to 15watts or better it should have metal back can for premium

7 performance in demanding applications, Conical dispersion : 142° or more, 6 ₹ 27,500.00 ₹ 165,000.00

Low impedance RMS continuous power of 60watts, impedance : 8 or

less,frequency range (-10dB) : 70 Hz - 20 kHz, frequency response (±3dB) :

100Hz - 20KHz, Max SPL on 100v should be 105dB or more etc complete

required as per specifications.

Supply, Installation, Testing & Commissioning of Full HD PTZ Camera

supporting 1080p at 60 Frames per Second, minimum 12X Optical Zoom

with FoV of 72 degree and minimum 255 presets. Camera should support

simultaneous outputs through HDMI, USB 3.0, IP/3G-SDI, Audio In and can

be controlled via RS232/422 and IP. Panning angle -170° ~ +170° , Tilting

angle -30° ~ +90. Camera should support SRT, PoE & should be compatible

with Virtual USB Driver. OEM should be BIS, CE, Clickshare, RoHS & FCC

Certified with test lab report supporting the certifications.

Supply Installation Testing and Commissioning of surface-mount USB-to-

Dante endpoint, two-way volume and mute sync for Microsoft

Teams,compliant with CE and FCC, device shouold have Power-over-

Ethernet (PoE) to IEEE 802.3af Class 0 standard and support Dante

9 networking using standard CatX cable, device should support the 1 ₹ 175,300.00 ₹ 175,300.00

Speakerphone profile with and without echo cancellation, enable two-way

volume and mute syncronization with both PC and Mac platforms, Dante

with AES67 compliance,Sampling Rate(s) 48 kHz,should be from same OEM

as DSP etc complete required as per specifications.

Suppy Installation Testing and Commissioning of control system with touch

panel/Ipad, 100/1000 Mbps, auto-switching, auto-negotiating,

10 auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, 1 ₹ 475,000.00 ₹ 475,000.00

DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant

11 Switch Supply, Installation, testing and commissioning of 16 port switch 1 ₹ 75,000.00 ₹ 75,000.00

Supply, Installation, testing and commissioning of wireless presentation

device which should have following features Wireless content input up to

1080P, HDMI 2.0 output, should Support native wireless mirroring protocols

like Airplay, Miracast, Chromecast should Support plug-n-play HDMI/Type-

12 C/U disk dongles for wireless connection, Support Windows APP for wireless 1 ₹ 245,000.00 ₹ 245,000.00

connection (MAC APP will be available soon), Support 4 split screen view,

Support wireless touch back on interactive whiteboard/touch screen, Best-

in-class data security with dual network and high standard encryption, PoE

supported, saving PSU when connecting with PoE ethernet switch

Supply, Installation, testing and commissioning of HDMI RX extender with

complies with the advanced HDCP 2.2 and HDMI 2.0 standards,

uncompressed HD audio and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and upto 40mat 4K,

HDBaseT feature support: HD Video and Audio, and Control (IR/RS-232 pass-

through) and CEC bypass, Supports pass-through of many audio formats

including LPCM (up to 8 channels), Bitstream and HD Bitstream

Supply, Installation, testing and commissioning of HDMI TX extender

complies with the advanced HDCP 2.2 and HDMI 2.0 standards,

uncompressed HD audio and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and upto 40mat 4K,

HDBaseT feature support: HD Video and Audio, and Control (IR/RS-232 pass-

through) and CEC bypass, Supports pass-through of many audio formats

including LPCM (up to 8 channels), Bitstream and HD Bitstream

Supply, Installation, testing and commissioning of Cable cubby (1 HDMI,

1LAN,1 Charging socket)

Digitally signed by AMIT

Supply Installation Testing and Commissioning of HDMI Audio Extractor

should extract up to 2 channels of LPCM audio or 5.1 channels of Bitstream

audio from an HDMI source, allowing the user to convert high quality HDMI

audio into more convenient analog (LPCM 2.0 sources only) or optical

signals for use with powered speakers or non-HDMI AV receivers. Both the

HDMI input and output HDMI ports should support 4K UHD resolutions up to

Deembedder 4K@60Hz (4:4:4, 8-bit) and should capable of providing high quality audio

and video performance. The unit should supports passthrough of HD and

standard Bitstream formats as well as LPCM 7.1 with audio sampling rates

up to 192kHz. Built-in EDID management support allows the user select

from multiple EDIDs and, with the use of optional PC software, to upload,

download, or edit EDID files etc and complete as required

Supply, Installation, Testing & Commissioning of USB 3.2 Extenders.

Transmitter should have 1xUSB C input port, 1X RJ45, 1xUSB-A Output Port.

Receiver should have Input Port 1×Cat5e/6A/7 (RJ45). 1×USB-C, 3×USB-A

Output Port. Bandwidth upto 5Gbps (SuperSpeed), Tranmission distance

upto 100M. Devices should be controlable by the USB host on a transmitter.

Should have backward compatibility with USB 2.0

Supply, Installation, Testing & Commissioning of Processor which can

enable Voice Tracking through PTZ Cameras integrated with Ceiling Tiles on

Tracking IP. The Processor should be capable of connecting minimum 4x Ceiling Tiles

Device with 4x IP based PTZ Cameras for Quadview output and Auto Switching . The

processor should have USB 3.0 Output for Soft VC. Quoted model should be

BIS, CE, FCC & RoHS Certified with Test Lab Reports.

Supply, Installation, testing and commissioning of Four HDMI inputs

4*4 HDMI matrixed to Four HDMI outputs with HDMI 2.0a specification and 18Gbps

switcher (600MHz) 4K UHD support, HD resolutions up to 3840×2160@60Hz (4:4:4, 8-

bit) & 4096×2160@60Hz (4:4:4, 8-bit), 16-bit Deep Color up to 1080p@60Hz.

20 Audio Cable Supply, installation, testing and commissioning of of Stereo Audio Cable 50 ₹ 750.00 ₹ 37,500.00

Supply, installation, testing and commissioning of of 2.5 Sqmm x 2 core ATC

copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables .

22 HDMI Cable Supplying and laying HDMI Cable with connector on both ends. 10 ₹ 910.00 ₹ 9,100.00

23 USB Cable Supplying and laying USB Cable with connector on both ends. 10 ₹ 525.00 ₹ 5,250.00

MD Room & Small Meeting Room

Supply, Installation, Testing and Comissioning of 65" or larger LED display.

Brightness -400nits or better, Resolution- 4K UHD or better, Viewing Angle

65" inch (H/V) - 178/178 or better, Contrast Ratio - 4,000:1 or better, Ports -

Display Minimum 2 x HDMI, 1 xDisplay port, 2xUSB, 1 x RJ45, 1xRS232 or more.

Bluetooth and WiFi connectivity options. With standard accessories and

suitable MS wall mounting bracket.

Supply, Installation, testing and commissioning of Unified communication

bar with BYOD, Built-in dante integration, Should have Built-In DSP which

automatically optimizes room acoustics, Integrated Beamforming

microphone, 6 Nos. of MEMS capsules with pickup range of 4.5m or more,

All in One Should have 4K ePTZ camera, 5x digital zoom with automatic framing and

Video person tiling feature, Built-in Class D amplifier with 4 Nos. of 40W full range

Conferending speaker, should have 2 x HDMI, 1 x USB Type-C(3.1), 1 x USB Type-A(3.1), 2

Bar x1000/100/10 Mbit/s (RJ45) ethernet ports, 5.1 bluetooth and IEEE 802.11a

/b /g /n /ac Wi-fi standard, Zooms and Teams certified, High-precision audio

settings for maximum control, setting to exclude (min 3) and prioritize the

areas of the room, should be controlled through centralized monitoring

software along with IR remote control and mounting kit.

Supply, Installation, testing and commissioning of wireless presentation

device which should have following features Wireless content input up to

1080P, HDMI 2.0 output, should Support native wireless mirroring protocols

like Airplay, Miracast, Chromecast should Support plug-n-play HDMI/Type-

3 C/U disk dongles for wireless connection, Support Windows APP for wireless 1 ₹ 245,000.00 ₹ 245,000.00

connection (MAC APP will be available soon), Support 4 split screen view,

Support wireless touch back on interactive whiteboard/touch screen, Best-

in-class data security with dual network and high standard encryption, PoE

supported, saving PSU when connecting with PoE ethernet switch

4 Cables Cables & connectors 1 50000 50000

Digitally signed by AMIT

Digitally signed by AMIT

NAME OF WORK - EPABX AND TELEPHONE

SI.NO DSR CODE DESCRIPTION

UNIT QTY RATE DSR AMOUNT

1 MR Supply, Installation, Testing & Commissioning of Server based Communication System with

all the required Software licenses and Hardware - IP-PBX/IP Telephony Communications

Server: The IP Telephony Solution shall support the following Services - Voice, Video, IM,

Presence and Audio Conference The IP Telephony Solution should support H.323 and SIP

The Solution should support the following Trunks - FXO, E1 PRI and SIP The IP Telephony

solution should incorporate all licenses for the Phones and Trunks Solution should support

all Extensions from Day 1 with future scalabilityupto 500 users. Licenses for all Phones

supplied should be provisioned on Day1 Solution should support Hard 20 IP Phones,

Softphones, Video Phones, Extensions with necessary Licenses, and 20 Analog Phones,

Rack mount architecture, complete as required and as per technical specifications.or its

equivalent specifications

2 MR Supply, Installation, Testing & Commissioning of 2.8” (diagonal) color display—320 x 240

pixels, Multiple line phone with four red / green line / feature indicators around display, 4

Context sensitive soft keys, Hard buttons for phone, messages, contacts, history, home,

navigation cluster, headset, speaker, volume, mute, LEDs for speaker, mute, headset,

essage, history, Wideband audio in handset and wired headset, Full duplex speakerphone

& handset, Ergonomic hearing aid compatible handset supports TTD acoustic coupler,

Message waiting indicator, Mute key with optional mute alerting, IC call alerting with 360-

degree visibility, Dual-position stand, optional wall-mount stand, Gigabit Ethernet (10 / 100

/ 1000) line interface, Second Ethernet interface 10 / 100 / 1000 Mbps, PoE Class (IEEE

802.3af) registers as class 1 device and supports 802.3az, Optional AC to 5 volt power

supply • SIP protocol support, Standards-based codec support: G.722, Opus, Configurable

via Web interface, Support for HTTPS, TLS and SRTP for encryption, Recent Call Log (100

entries), Zero touch deployment via Device Enrollment Services Support, Supports the

following languages: Dutch, English (UK & US), French, (Canada), French (France), German,

Italian, Japanese, Portuguese (Brazil), Simplified Chinese, Spanish (Latin America), Spanish

(Spain),Traditional Chinese, Includ Licence.or its equivalent specifications

3 MR Supply, Installation, Testing & Commissioning of Analog Phones Nos 20 ₹ 1,950.00 ₹ 39,000.00

4 MR Supply, Installation,Testing and commisioning of IP phone license complete as required Nos 20 ₹ 3,500.00 ₹ 70,000.00

Digitally signed by AMIT

ACTIVE & PASSIVE

S.No. CODE Item

Units Qty Rate

NDSR Amount DSR Amount

1 Supply Installation Testing & Commissioning of Internet Router which can support the Fiber Line as per the given Specification. The Router

should be modular in architecture with multicore processor Router should have 2 nos. of 10/100/1000 Base T-Pots and 2 nos should have

SFP based ports option. The Router should have 2 x 10G from Day 1. Router should have 1x RJ-45 and 1xUSB Console port. should have 1:1

redundant internal and field replaceable, power supply 2 open slots for additional LAN/WAN modules, 4GB DRAM active and 8 GB Compact,

DES, 3DES and AES Standard support IPSec with IKEv2 and Suite- B Encryption. 1K GRE and 1K IPSec Tunnels. OSPFv2. OSPFv3.BGP4.

MBGP.BFD. Policy based routing IPv4 and IPv6 tunnelling.Router should support 750K IPv4 and IPv6 routes ,support IGMP v1/v2/v3 and PIM

multicast routing , MPLS and Firewall feature from Dav 1 ,Shall have 802.1q class of service and marking, classification policing and shaping.

support monitoring of network traffic with application. Router shall have traffic load balancing capability on dual WAN Link based

2 MR Supply, Installation, Testing and Commissioning of 24port Core Switch with switching capacity of 3.2 Tbps, forwarding performance of 1

Bpps with 24x 1/10/25G Gigabit Ethernet + 4x 40/100G Uplink ports,Redundant hot swappable Power Supply and fans/Fantray.Should have

advance layer 3 (RIPng, OSPF,IS-IS, BGP , VRF , VXLAN , 802.1x, Macsec , PIM SM, PIM SSM, PIM-BIDIR and MPLS) from day-1.MAC address

support for 32 K , 200,000 IPv4 unicast routes and 100,000 IPv6 unicast routes entries ,32,000 IPv6 multicast routes , 25K Security ACL ,

Should support min 16 GB internal DRAM, 16 GB internal Flash memory , 32 MB Packet buffer. Common Criteria Certification like NDPP or

EAL and Ipv6 Certification from day-1

3 Supply, Installation, Testing and Commissioning of 24 Port POE+ Access Switch to provide 24 nos. 1G Base-T ports with minimum PoE budget

of 350W and 4x 10G SFP+ uplink ports. Should support internal redundant Power Supply and support dedicated slot for modular stacking, in

addition to asked uplink ports with stacking bandwidth of minimum 80 Gbps with 8 switch in single stack. Should support min 2GB internal

DRAM, 4GB internal Flash memory , 6 MB Packet buffer, 16 K MAC address, 11 K IPv4 routes ,1k Multicast Routes , 1500 ACL entries, Should Nos 4 ₹ 280,500.00 ₹ 1,122,000.00

have static, RIPv1, RIPv2, RIPng,OSPF, MACSEC,802.1x , PBR and VRRP from day 1 & upgradable to support IS-IS, VXLAN & VRF. Common

Criteria Certification NDPP and Ipv6 Certification from day-1

4 MR Supply, Installation, testing and commissioning of 1000Base LX / LH / SFP Transreceiver Module (SFP modules) Nos 4 ₹ 24,500.00 ₹ 98,000.00 ₹ -

5 MR Supply, Installation, Testing and Commissioning of Multi Mode fiber SC-LC Duplex patch cord of 2 Mtrs. for Gigabit Connection

between Patch Panel and Switch etc. complete as required.

6 MR Supply, Installation, testing and commissioning of LC-LC Singlemode OS2 Duplex Patch Cord, 1 Meter Nos. 4 ₹ 2,970.00 ₹ 11,880.00 ₹ -

7 MR Supply, Installation, Testing & Commissioning of 24 Port Unloaded Line Interface Unit LIU, 19",1u Rack Mountable unit with splice Tray

Holder, Cable Guide, Fiber Management and Splicing of Pigtails and Fiber Cables Including Joints and Connectors

etc. complete as required.

8 MR Supplying and drawing of LSZH STP 4 pair CAT 6 LAN low smoke Cable in the existing surface/recessed Steel/ PVC conduit as

9 MR Supply, Installation, Testing & Commissioning of CAT 6 Information Outlet, meets all TIA and ISO requirements Complete in all respect

as required by the site etc. complete as required.

10 MR Supply, Installation, Testing & Commissioning of CAT 6 Patch Cord LSZH 2 Mtr, 4 pair 26 AWG stranded copper wire, Pre-

terminated with RJ45 plugs, Slim clear anti-snag slip on boots meets all TIA and ISO requirements. Complete in all respect as required

by site completion etc. complete as

11 MR Supply, Installation, Testing & Commissioning of CAT 6 Patch Cord LSZH 1 Mtr, 4 pair 26 AWG stranded copper wire, Pre-

terminated with RJ45 plugs, Slim clear anti-snag slip on boots meets all TIA and ISO requirements. Complete in all respect as required

by site completion etc. complete as

12 MR Supply, Installation, Testing & Commissioning of dual face plate having provision for one I/O along with spring type shutter for

dust proof, made of ABS PVC plastic etc. complete as required.

13 MR Supply, Installation, Testing & Commissioning of 24 Port loaded Cat 6 Jack Panel, Staggered 24 Port panel with All port LED in 1U Rack

Unit, Copper Alloyed Contact Material, black color, Front Port Labeling, 22-24 AWG Wire Accumulation etc.

complete as required.

14 MR Supply, Installation, testing and commissioning of 42U Normal Rack with accessories Nos 1 ₹ 135,000.00 ₹ 135,000.00 ₹ -

15 MR Supply, Installation, Testing & Commissioning of Horizontal cable manager etc. complete as required. Nos 4 ₹ 2,475.00 ₹ 9,900.00 ₹ -

Digitally signed by AMIT