PERIODICAL SERVICES TO CERTAIN BLDGS AND INFRASTRUCTURE, PROVN OF VOLLEY BALL COURT, ADDN/ALTN OF STN CSD CANTEEN AND OFFICER MESS KITCHEN AND REPAIR AND MAINT OF STREET LIGHT, POST TOP LANTERN, BLDG SECURITY LIGHT, AREA LIGHTING, REPLCEMENT OF UNSER

Amount

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white/lime wash on walls including cornices, pilasters etc, complete all as specified and directed.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white/lime wash on walls including cornices, pilasters etc, complete all as specified and directed.

All as per item No. 2.00 here-in-before but on ceiling surfaces, complete all as specified and directed.

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion on walls including cornices, pilasters etc, complete all as specified and directed.

All as per item No. 4.00 here-in-before but on ceiling surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment from walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on walls including cornices, pilasters etc, complete all as specified and directed.

All as per item No. 6.00 here in before but on ceiling surfaces, complete all as specified and directed.

M&L for preparation of old painted wood and wooden surface any description not otherwise described and exc 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) , complete all as specified and as directed.

M&L for preparation of old painted steel or iron surfaces any description not otherwise described and exc 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) , complete all as specified and as directed.

M & L for complete removal of existing treatment and applying a coat of 2mm thick of wall care putty in wall etc. rubbing with sand paper to obtain smooth & plain surface, complete all as specified and directed.

M&L for preparing old surfaces of plastered or unplastered surfaces of walls by brooming down and applying one coat of cement base paint, complete all as specified and directed.

M&L for complete removal of existing treatment from plastered or unplastered surfaces including washing, rubbing down and scrapping smoke, soot, moulds, moss and greasing spots with steel wire brush and applying two coats of cement base paint, complete all as specified and directed.

M & L for preparing old decorated surfaces of walls and applying one coat of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed.

M & L for complete removal of existing wall treatment and applying two coats of plastic emulsion paint over a coat of putty on wall/ceiling surface with any colour and pattern, complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high, complete all as specified and directed.

All as per item No 15.00 here-in before but stops, commas, short lines, dashes, hyphens, brackets, etc., complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed..

M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

Surface excavation n. exc. 30cm deep and averaging 18cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, complete all as specified and directed

M&L for hardcore of gauge not exceeding 63mm of broken stone, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

M & L 75mm thick PCC (1:3:6), type C-2, (using 40mm graded crushed stone aggregate) as in path, drain sides, plinth protections etc.finishing cement concrete surface even and smooth without using extra cement , complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) finished even and fair (without using extra cement) as in floors and paving etc, complete all as specified and directed.

S&F of hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running nars, for doors, balusters, nosing to steps including embedng in concreted and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 209 Gde E-165, complete all as specified and directed

M&L for preparation of new steel or iron surfaces of any description n. exc. 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed.

S&F of ITF approved polypropylene interlocking tiles for outdoor Tenis court/Badminton court/Volleyball court with following specification:- (a) Thickness of tiles not less than 15.5mm. (b) Dimension not less than 304.8mm x 304.8mm, square shape (c) Weight not less than 320-340gm/per tile Note :- Contractor shoud produced manufacturer waranty certificate 05 years alongwith original purchage voucher.

M&L for game line marking of volleyball court of standard thickness, complete all as specified and directed

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in CM (1:4), complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth n. exc. 10 Sqm on plan for foundation etc. and getting out in hard/dense soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and similar work, complete all as specified and directed.

M&L for for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls , built in cement mortar (1:6), complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces over and including rendering 10mm thick, in cement mortar (1:4), surfaces finished even and rough as in skirting/dado etc incl circular cutting or notching and waste etc, complete all as specified and directed.

M&L for coloured ceramic non skid joint free tiles of size 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm laid over and including 15mm thick screed bed or bedding layer of cement mortar in CM (1:6) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for machine cut kota stone slab flooring and shelves 20-25mm thick laid over cement screed base of 20mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Taking down steel rolling shutters of any description and refixing the same after carying out repairs, oiling and greasing including replacing with new guide channels and weldings etc. complete and providing one coat of synthetic enamel paint (1st grade quality) to match with existing surface area of shutters n. exc. 7 sqm, complete all as specified and directed. Note: Supply of spare parts like bearing, tension spring/ gear operated lever and shaft, guided rail shall be measured saparately.

Supply only ball bearing for rolling shutter suitable for 32 to 40mm suspension shaft, complete all as specified and directed.

Supply only tension springs of rolling shutters suitable for 32 to 40mm suspension shaft, complete all as specified and directed.

Supply only mild steel pipe heavy duty 40mm dia suitable for shaft of rolling shutters including dismantling the old rusted broken shaft and positioning with all accessories, complete all as specified and directed.

Takiing down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each, complete all as specified and directed.

Takiing down chowkat with shutter without taking off shutter from the frame n.exc 1.5 Sqm each, complete all as specified and directed.

S&F powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as directed and specified.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber, neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as directed and specified. (Note:- Glass/ other filling material in panels shall be measured and paid separately)

S&F 4.8mm thick, plain sheet glass of any colour and glazing with and including anodised aluminium snap beading or rubber/reopen bead, fixed in aluminium frame or door frame, complete all as directed and specified.

S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with aluminium frame partition or aluminium shutter, complete all as specified and directed.

S&F aluminium anodised sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

S&F 200mm long aluminium anodised tower bolt of extruded section, complete all as directed and specified.

S&F 150mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. (Note:- Reinforcement shall be cut as required to facilitate demolition.)

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs landings, lintel beam and similar work, vertical or to batter for rough finished, flat surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm, rough finished surfaces, complete all as specified and directed

M&L for RCC (nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, lintels and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like, complete all as specified and directed.

S & F mild steel TMT bars 6mm to 8mm dia (Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in repair, complete all as specified and directed.

M&L for providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc., complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (die cast) body and weight between 60 to 80 kg, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F 16mm dia CPVC pipes SDR-13.5 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, end plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F 20mm dia CPVC pipes SDR-13.5 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, End plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F of CPVC 16mm dia brass threaded elbow for SDR 13.5 pipe, complete all as specified and directed

S&F of CPVC 16mm dia brass threaded tee for SDR 13.5 pipe, complete all as specified and directed

S&F of CPVC 16mm dia male brass threaded adaptor for SDR 11 pipe, complete all as specified and directed

S&F in repair 15mm bore, stop valve, fancy type, chromium plated, with long shank and cup, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 20mm bore, stop valve, fancy type, chromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy, crutch or butterfly handle, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair sinks made of stainless steel with drainage board 1mm thick with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm size, complete all as specified and directed.

S&F in repair 20mm bore, gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S & F in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight - 210 gms), complete all as specified and directed.

S&F in repair 110mm dia gratings of PTMT (minimum weight - 25gms), complete all as specified and directed.

S&F 18mm thick prelim wooden finished PVC plastic celluka ply for cupboard, shelf etc including all required joining accessory, complete all as specified and directed.

S&F 8mm dia, ball catches with steel ball, and brass body and striking plate including letting, complete all as specified and directed.

S&F 75mm aluminium anodised hasp and staple, safety type and fixed with screws, complete all as specified and directed.

S&F of perforated cutlary drawer length is 500-55 mm, depth exc. 490mm, height -90mm made of stainless steel of grade IS:202. including necessary fixing arrangement to the cupboard kitchen cabinet board with glue, nails, screw etc and make easily operational, complete all as specified and directed.

S&F of plain basket drawer length is 500-550mm, depth exc. 500mm, height -100mm made of stainless steel of grade IS:202. (allowable tolerance limit 20mm dimension) including necessary fixing arrangement to the cupboard kitchen cabinet board with glue,nails,screw etc and make easily operational, complete all as specified and directed.

S&F of cup and saucer basket length is 500-550mm, depth exc. 500mm, height -100mm made of stainless steel of Grade IS:202. (allowable tolerance limit 20mm dimension) including necessary fixing arrangement to the cupboard kitchen cabinet board with glue,nails,screw etc and make easily operational, complete all as specified and directed.

S&F of thali basket drawer length is 500-550mm, depth exc. 500mm, height -200mm made of stainless steel of grade IS:202. (allowable tolerance limit 20mm dimension) including necessary fixing arrangement to the cupboard kitchen cabinet board with glue,nails,screw etc and make easily operational, complete all as specified and directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, complete all as specified and directed.

S&F continuous piano hinges, mild steel, bright finish or electrogalvanized width of flap (when open) 30mm, complete all as specified and directed.

S&F in repair stainless steel plate rack of size 0.75 x 0.78m made out of 0.85mm thick stainless steel standard quality, weight not less than 6 Kg each, complete all as specified and directed.

M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605 x 605mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 25mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 25mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S & F 75mm bore PVC (SWR) rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to wall , complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old CGI sheet of any thickness complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including dismantling of old PGI sheet of any thickness , complete all as specified and directed.

Fixing only plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors, ceiling in CM (1:3), complete all as specified and directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20mm dia and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick including PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sqmm as earth wire connected to common earth dully for one light point / one fan point/one bell/buzzer point controlled by one, one way swtich, complete all as specified and directed. Note: - (i) Unit quoted rate shall deemed to be included for cutting chases for conduit and sinking for boxes and making good of wall floors etc as per exsting.

All as per item No 101.00 here-in before but on independent board, complete all as specified and directed

All as per item No 101.00 here-in before but one 5 Amp 3 pin socket outlet point on same board with other switches including earth wire, complete all as specified and directed.

All as per item No 101.00 here-in before but with 2.5 Sqmm PVC copper multi stranded cable FRLSH type for one 15 Amp 6 pin socket on independent board including PVC cable 2.5 Sqmm FRLSH type copper multi stranded conductor as earth wire, complete all as specified and directed.

S&F piano switch, flush button 5 Amp single pole one way 230 volts white finish, complete all as specified and directed.

S & F switch socket combination, flush type, 5 pin, type 6 Amps complete all as specified and directed

S & F switch socket combination, flush type, 6 pin, type 16 Amps complete all as specified and directed.

S & F socket outlet, flush type, 5 pin 5 Amp, complete all as specified and directed.

S&F in ceiling rose of size 65 x 50mm, surface bakelite, three terminal, completes all as specified and directed.

S&F power unit suitable for load max up to 3.5 KW including sockets 25 Amps, and six module box for mounting of power unit and power socket, complete as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed.

S&F LED street light fittings 30 watt 230 v AC outdoor type with high pressure dia cast aluminium housing and heat-resistant complete with driver, lamp bracket with impact and corrision resistant, IP 65/66 protection, complete all as specified and directed.

S & F water tight bulk head fitting, comprising of connector galvanised cast iron back plate, weather proof enameled gallery, with electronic driver, (latest design), 10 W, upper PVC body, complete all as specified and directed. (Make: Havells Cat Part No. HEXAFT10WLED857SSYMBOPC/Bajaj Cat Part No. BIBWP 10W LED/Crompton Cat Part No. LBHP-10-CDL)

S & F in replacement angle holder, insulated body, with back plate for conduit fittings, complete all as specified and directed.

S&F LED lamp 9 watt for angle holder, complete all as specified and directed.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 2.5 Sqmm drawn in and including heavy duty PVC conduit not less than 20mm size including 2.5 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC conduit and its accessories is deemed to be included in the unit quoted rate.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4 Sqmm drawn in and including heavy duty PVC conduit not less than 20mm size including 4 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC conduit and its accessories is deemed to be included in the unit quoted rate.

S&F in repair sheet metal enclouser for single door vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 12 way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof, IP:43 protection suitable for incorporation FP 'G' frame MCCB(V-Tech) N1 Frame upto 125A, isolators and including give connection with wire and cable etc, complete all as specified and directed.

S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 08 way, single pole and neutral, with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed.

S&F MCCB 63 Amps, AC 4 pole 415 volt 16 KA, breaking capacity with thermal magnetic protection Ics=100 % Icu, MCCB shall have auto operative double break mechanism and toal brak time less than equal to 10ms including testing on connection, completes all as specified and directed.

S&F in repair MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘B’ series, fixed in proper position, complete all as specified and directed.

S&F in repair MCB Single Pole & Neutral (SPN) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

M &L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3cm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized wire of size 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part -1, including necessary excavation and earth work, P.C.C (1:3:6) type C-1 with 50mm thick Pre-cast R.C.C. (1:2:4) type B1 cover slab (reinforced with 8mm dia deformed bar 15cm C/C both ways and suitable handle of 10mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with funnel and 20mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, Gl earth wire protected by 15mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismantling of old unserviceable earthing of any descriprtion, complete all as specified and as directed. Note : Proper earthing pit should be provided with pit cover.

S&F of wall mounted fan capacity 90 CFM, 2050 RPM 110 watt, size 400mm with all fixing arrangements in wall and connecting calble upto ceiling rose, complete all as specified and as directed.

Fixing only exhaust fan (M.D. supply) and connecting up including provision of cable from ceiling rose/connector to fan, complete all as specified and as directed.

Supply, fixing, testing & commisioning of electric chimney (90cm) with feature of filterless & steam autoclaean technology, in built light, digital display, gesture (motion) & touch control, BLDC motor, extra installation kit, air suction capacity 1850cum/h with 3 speed mode + 1 turbo mode, input vol 220-240 V/50Hz and fitting in wall as connecaled with making duct provison with flexible PVC pipe, complete all as specified and as directed.

S&F water heater storage type, capacity 50 litres (minimum 2 Kw heating element) BEE 5 star rated, 8 ber pressure rating, vartical hanging including proper hanging arrangement on wall, cold/hot water connection of required lenghth (not more than 3 mtr), hot water outlet line, complete all as specified and as directed.

Taking down unserviceable street light fittings of street light/flood light of any capacity/any size, from existing pole, complete all as specified and as directed.

S&F 40mm nominal bore GI pipe brackets made out of medium grade pipe of required length not less than 1.20m consisting mounting brackets made out of mild steel FI 40 x 6mm required shape (two Nos per GI pipe brackets) duly fitted with 4 Nos mild steel nuts, bolts and washers in walls/poles etc. and painting with two coats of synthetic enamelled paint over one coat of red oxide zinc primer including taking down old unserviceable GI braket of any shape/size from pole, complete all as specified and directed.

M&L for sub class ‘B’ old size bricks, burnt clay bricks, laid flat, dry in trenches for cable protection, complete all as specified and directed.

M&L for sand cushioning for protection of underground cable, consolidated and compacted with clean and dry, complete all as specified and directed.

Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

M&L for galvanized iron tubing 40mm bore, light grade, with necessary fittings and clamp for mounting of air termination spike including taking down old unserviceable GI tubing of any description, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core including taking down old unserviceable UG cable of any size, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core including taking down old unserviceable UG cable of any size, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core including taking down old unserviceable UG cable of any size, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core including taking down old unserviceable UG cable of any size, complete all as specified and directed.

M & L for disconnecting burnt end or portion of UG cable, removing the cable from loop including necessary excvation and earth work, relaying and reconnecting the cable by removing burnt portion of cable and preparing fresh terminal for cable of cross sectional area 10 Sqmm 2 core to 95 Sqmm 3.5 core of LT cable to pole, main switch, LT panel etc, complete all as specified and directed.

M&L for PCC (1:2:4), type B-1. (using 20mm graded crushed stone aggregate) as in benching. coping, bed plate, lintel, benching/foundation etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

Supply, installation, testing and commissioning factory fabricated feeder pillar (outdoor type) weather dust and vermin proof fabricated out of 3.15mm thick CRCA steel sheet outer portion AC 415 volts, 50 HZ of size 600mm x 400mm x 300mm mounted on PCC foundation and inner portion of size 2.0mm thick suitable size of MS channel supports and and with suitable size of angle iron legs for grouting steel sheet powder coated paint internally and externally and locking arrangement including all incoming and outgoing connection with suitable size of lugs and glands dismantling existing unserviceable panel and including the following:- Incoming :- (i) MCCB 63 Amp, 4 pole with adjustable thermal and fixed magnetic type - 01 No. (ii) Digital Voltmeter -01 No. (iii) Digital Ammeter -01 No. (iv) Indication lamp -01 No (v) Aluminium busbar 3 phase 4 wire for rating 200 Amps for phase and neutral 04 Nos. (vi) (ii) panel mounted Astronomical timer with automatic on-off throgh 65 Amp TP contactor & by-pass function 63 Amp MCB TP for mannual on-off. Outgoing :- (i) MCCB 63 Amp, 4 pole with adjustable thermal and fixed magnetic type-01 Nos (ii) panel mounted Astronomical timer with automatic on-off throgh 65 Amp TP contactor & by-pass function 63 Amp MCB TP for mannual on-off. (iii) Indication lamp -01 No

S&F in repair KIOSK box weather proof made out of PVC and including one piece mounted SMC base and door pole mounted hinged door size 333 x 233 x 200mm out side and 300 x 200 x 105mm inside dimension comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amp and 10 Amp MCB for controlling the street light fitting including FI clamps 30 x 4mm with necessary MS nuts bolts and washer including embossing/painting of danger notice of size not less than 10cm x 7.5 cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body, complete all as specified and directed.

S&F LED street light fittings 60 watt 230 v AC outdoor type with high pressure dia cast aluminium housing and heat-resistant complete with driver, lamp bracket with impact and corrision resistant, IP 65/66 protection, complete all as specified and directed.

S&F LED street light fittings 70/72 watt 230 v AC outdoor type with high pressure dia cast aluminium housing and heat-resistant complete with driver, lamp bracket with impact and corrision resistant, IP 65/66 protection, complete all as specified and directed.

S&F LED street light fittings 90 watt 230 v AC outdoor type with high pressure dia cast aluminium housing and heat-resistant complete with driver, lamp bracket with impact and corrision resistant, IP 65/66 protection, complete all as specified and directed.

S&F LED street light fittings 35/45 watt 230 v AC outdoor type with high pressure dia cast aluminium housing and heat-resistant complete with driver, lamp bracket with impact and corrision resistant, IP 65/66 protection, complete all as specified and directed.

S & F in replacement 3 core PVC insulated unsheathed multistranded copper conductor cable of size 1.5 Sqmm passing through PVC conduit from junction box to fittings, complete all as specified and directed. (Note: PVC conduit shall be measured and paid seperately.)

M & L for LED constant current driver for 45 watt light fittings, complete all as specified and directed.

M & L for LED constant current driver for 60 watt light fittings, complete all as specified and directed.

Note: An amount of Rs.37,105.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

DEEP NIRMAN (BID ID -3111114)

M/S P K AGARWALA (BID ID -3112154)

M/S DEY ENTERPRISE (BID ID -3109765)

MAJUMDER ENTERPRISE (BID ID -3109725)

M/S ANNI ENTERPRISE (BID ID -3112778)

SHRI SURAJIT SIKDER (BID ID -3112288)

MAA TARA TRADING (BID ID -3109795)