S/F OF LED STREET LIGHT DAMAGE POLE AND TUBEWELL ETC

Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respects. 616

Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-36 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respects. Analisis

Dissmentling of existing pole 616 LR

Supply & fixing of 230mm x 32mm x 1.5mm galvanized steel strips including holes for shackle insulators pins and bolts etc. complete in all respects. (622)

Supply & erection of “D” clamps of 50mm x 6mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. 623

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respects. (634)

Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator,19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respect 631

Supply & erection of overhead line with ACSR conductor on poles/service bracket including binding etc. complete in all respects. (627)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade in existing masonary open duck as directed by Engineer- In charge complete in all respect inculding axcavation and rifling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 10sq mm 2 core 20e.1.2

(b) 16sq mm 4 core 20e.1.9

(c) 25sq mm 3.5 core 20e.1.10

S/F of LED street light potted driver set suitable for 110W to 130W complete in all respect. APPD

S/F of Surge Protection Device (SPD) for LED lights. APP

Dissmentling of 120 watt LED street light from pole 1424 LR

Refixing of 120 watt LED street light ofter repair on pole 1424 LR

Dissmentling of high mast 30 mtr from pole 21.3.4

Refixing of high mast 30 mtr from pole 21.3.4

S/F of GI pipe 100mm dia DSR 18.8.7

Supply and fixing of LED Street light Fitting with mandatory dirver set having die cast aluminium body with tougbend glass UV stabilized PC cover and lenses suitable for 110 to 130 Watt. Confirming to IP 65 and above Protection complete in all respect. 23.17

Supply and burying safe earthing Electorde T-19 (Hot Dip Galvanized), Length 2000 mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board , cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified 725 A

Cement Conceret with 4 Cm. (1.5") Guage approved Stone Ballast, Approved coarse sand and cement in the proportion of 4:2:1 including Supply of all materials, Labour and T&P etc. Required for propeer completion of the work. 279

S/F of 63 AMP. 415 volts metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle irorn bracket in all respact 327 cat B

Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve6 - 32 amps.Cat. b 1002

Supply and Wiring of submains with 2 nos. of 4 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. 289 A

Supply and fixing of sheet steel enclosure surface/fluse fitted with 20amp. 2 pin and earth metal cled scraping earth plug end socket complete in all respact as directed site by E/I 1031

Supply and fixing of one number 8 SWG G.I. wire in 15 mm. dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. 721

Transportation Charges of drilling equipment including assembly and other materials as required completion of work. JAL NIGAM

Drilling by DC/RC Machine 600MM up to 100 mtr Deep. JAL NIGAM

Drilling by DTH Machine 450 MM up to 100 mtr Deep. JAL NIGAM

Drilling by DTH Machine 450 MM up to 100 mtr Deep. JAL NIGAM

Electrical logging of bore hole JAL NIGAM

S/L of aluminum conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand al round and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc.16 sqmm 4 core cable 20B.1.9